f5networks.f5_modules.bigiq_device_discovery module – Manage BIG-IP devices through BIG-IQ

Note

This module is part of the f5networks.f5_modules collection (version 1.33.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigiq_device_discovery.

New in f5networks.f5_modules 1.0.0

Synopsis 

Discovers and imports BIG-IP device configuration on the BIG-IQ.

Parameters 

Parameter	Comments
access_conflict_policy string	Sets the conflict resolution policy for Access module `apm` objects. Only used when the `apm` module is specified. Choices: `"use_bigiq"` `"use_bigip"` `"keep_version"`
access_group_first_device boolean	Specifies if the imported device is the first device in the access group to import shared configuration for that access group. Choices: `false` `true` ← (default)
access_group_name string	Access group name to import Access configuration for devices. Once set it cannot be changed.
conflict_policy string	Sets the conflict resolution policy for shared objects across BIG-IP devices, except LTM profiles and monitors. Choices: `"use_bigiq"` ← (default) `"use_bigip"`
device_address string / required	The IP address of the BIG-IP device to be imported/managed. For this module, `provider` block should point to `BIG-IQ` credentials
device_conflict_policy string	Sets the conflict resolution policy for objects that are specific to a particular to a BIG-IP device and not shared among BIG-IP devices. Choices: `"use_bigiq"` ← (default) `"use_bigip"`
device_password string	The administrator password for the BIG-IP device. This parameter is only required when adding a new BIG-IP device to be managed.
device_port integer	The port on which a device trust setup between BIG-IQ and BIG-IP should happen. Default: `443`
device_username string	The administrator username for the BIG-IP device. This parameter is only required when adding a new BIG-IP device to be managed.
force boolean	Forces rediscovery and import of existing modules on the managed BIG-IP. Choices: `false` ← (default) `true`
ha_name string	DSC cluster name of the BIG-IP device to be managed. This is optional if the managed device is not a part of a cluster group. When `use_bigiq_sync` is set to `true`, this parameter is required.
modules list / elements=string	List of modules to be discovered and imported into the device. These modules must be provisioned on the target device, otherwise operation will fail. The `ltm` module must always be specified when performing discovery or re-discovery of the the device. When `asm` or `afm` are specified, the `shared_security` module also needs to be declared. Choices: `"ltm"` `"asm"` `"apm"` `"afm"` `"dns"` `"websafe"` `"security_shared"`
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing. Choices: `false` ← (default) `true`
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable `F5_PASSWORD`.
server string / required	The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`. Default: `443`
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: `"rest"` ← (default)
user string / required	The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`. Choices: `false` `true` ← (default)
state string	The state of the managed device on the system. When `present`, enables new device addition as well as device rediscovery/import. When `absent`, completely removes the device from the system. Choices: `"absent"` `"present"` ← (default)
statistics dictionary	Specify the statistics collection for discovered device.
enable boolean	Enables statistics collection on a device. Choices: `false` ← (default) `true`
interval integer	Specifies the interval the data is collected from the discovered device, in seconds. Choices: `30` `60` ← (default) `120` `500`
stat_modules list / elements=string	Specifies for which modules the data is being collected. Choices: `"device"` ← (default) `"ltm"` ← (default) `"dns"` Default: `["device", "ltm"]`
zone string	Specifies in which DCD zone is collecting the data from device. Default: `"default"`
use_bigiq_sync boolean	When set to `false`, initiate BIG-IP DSC sync when deploying configuration changes. When set to `true`, ignore BIG-IP DSC sync when deploying configuration changes. Choices: `false` ← (default) `true`
versioned_conflict_policy string	Sets the conflict resolution policy for LTM profile and monitor objects that are specific to a BIG-IP software version. Choices: `"use_bigiq"` `"use_bigip"` `"keep_version"`

Notes 

Note

BIG-IQ >= 6.1.0.
This module does not support atomic removal of discovered modules on the device.
Provider should point to the BIG-IQ credentials
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples 

- name: Discover a new device and import config, use default conflict policy.
  bigiq_device_discovery:
    device_address: 192.168.1.1
    device_username: bigipadmin
    device_password: bigipsecret
    modules:
      - ltm
      - afm
      - shared_security
    provider:
      password: secret
      server: cm.mydomain.com
      user: admin
  delegate_to: localhost

- name: Discover a new device and import config, use non- default conflict policy.
  bigiq_device_discovery:
    device_address: 192.168.1.1
    modules:
      - ltm
      - dns
    conflict_policy: use_bigip
    provider:
      password: secret
      server: cm.mydomain.com
      user: admin
  delegate_to: localhost

- name: Force full device rediscovery
  bigiq_device_discovery:
    device_address: 192.168.1.1
    modules:
      - ltm
      - afm
      - dns
      - shared_security
    force: true
    provider:
      password: secret
      server: cm.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove discovered device and its config
  bigiq_device_discovery:
    device_address: 192.168.1.1
    state: absent
    provider:
      password: secret
      server: cm.mydomain.com
      user: admin
  delegate_to: localhost

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
access_conflict_policy string	Sets the conflict resolution policy for Access module `apm` objects. Returned: changed Sample: `"keep_version"`
access_group_first_device boolean	First device in the access group to import shared configuration for that access group. Returned: changed Sample: `true`
access_group_name string	Access group name to import Access configuration for devices. Returned: changed Sample: `"foo_group"`
conflict_policy string	Sets the conflict resolution policy for shared objects across BIG-IP devices. Returned: changed Sample: `"use_bigip"`
device_address string	The IP address of the BIG-IP device to be imported/managed. Returned: changed Sample: `"192.168.1.1"`
device_conflict_policy string	Sets the conflict resolution policy for objects that are specific to a particular to a BIG-IP device. Returned: changed Sample: `"use_bigip"`
device_port integer	The port on which a device trust setup between BIG-IQ and BIG-IP should happen. Returned: changed Sample: `10443`
ha_name string	DSC cluster name of the BIG-IP device to be managed. Returned: changed Sample: `"GROUP_1"`
modules list / elements=string	List of modules to be discovered and imported into the device. Returned: changed Sample: `["ltm", "dns"]`
use_bigiq_sync boolean	Indicates if BIG-IQ should manually synchronize DSC configuration. Returned: changed Sample: `true`
versioned_conflict_policy string	Sets the conflict resolution policy for LTM profile and monitor objects. Returned: changed Sample: `"keep_version"`

Authors

Wojciech Wypior (@wojtek0806)

f5networks.f5_modules.bigiq_device_discovery module – Manage BIG-IP devices through BIG-IQ

Synopsis

Parameters

Notes

Examples

Return Values