fortinet.fortios.fortios_firewall_dos_policy6 module – Configure IPv6 DoS policies in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.8).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_dos_policy6
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and dos_policy6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Configure IPv6 DoS policies. |
|
Anomaly name. |
|
Action taken when the threshold is reached. Choices:
|
|
Enable/disable anomaly logging. Choices:
|
|
Anomaly name. |
|
Quarantine method. Choices:
|
|
Duration of quarantine. (Format |
|
Enable/disable quarantine logging. Choices:
|
|
Enable/disable this anomaly. Choices:
|
|
Determine TCP maximum segment size (MSS) value for packets replied by syn proxy module. Choices:
|
|
enable/disable TCP selective acknowledage (SACK) for packets replied by syn proxy module. Choices:
|
|
enable/disable TCP timestamp option for packets replied by syn proxy module. Choices:
|
|
Determine TCP Window size for packets replied by syn proxy module. Choices:
|
|
Determine TCP window scale option value for packets replied by syn proxy module. Choices:
|
|
Determine TCP differentiated services code point value (type of service). Choices:
|
|
Determine Time to live (TTL) value for packets replied by syn proxy module. Choices:
|
|
Anomaly threshold. Number of detected instances (packets per second or concurrent session number) that triggers the anomaly action. |
|
Number of detected instances per minute which triggers action (1 - 2147483647). Note that each anomaly has a different threshold value assigned to it. |
|
Comment. |
|
Destination address name from available addresses. |
|
Address name. Source firewall.address6.name firewall.addrgrp6.name. |
|
Incoming interface name from available interfaces. Source system.zone.name system.interface.name. |
|
Policy name. |
|
Policy ID. see <a href=’#notes’>Notes</a>. |
|
Service object from available options. |
|
Service name. Source firewall.service.custom.name firewall.service.group.name. |
|
Source address name from available addresses. |
|
Address name. Source firewall.address6.name firewall.addrgrp6.name. |
|
Enable/disable this policy. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
Notes
Note
We highly recommend using your own value as the policyid instead of 0, while ‘0’ is a special placeholder that allows the backend to assign the latest available number for the object, it does have limitations. Please find more details in Q&A.
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: Configure IPv6 DoS policies.
fortinet.fortios.fortios_firewall_dos_policy6:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_dos_policy6:
anomaly:
-
action: "pass"
log: "enable"
name: "default_name_6"
quarantine: "none"
quarantine_expiry: "<your_own_value>"
quarantine_log: "disable"
status: "disable"
synproxy_tcp_mss: "0"
synproxy_tcp_sack: "enable"
synproxy_tcp_timestamp: "enable"
synproxy_tcp_window: "4096"
synproxy_tcp_windowscale: "0"
synproxy_tos: "0"
synproxy_ttl: "32"
threshold: "0"
threshold_default: "0"
comments: "<your_own_value>"
dstaddr:
-
name: "default_name_22 (source firewall.address6.name firewall.addrgrp6.name)"
interface: "<your_own_value> (source system.zone.name system.interface.name)"
name: "default_name_24"
policyid: "<you_own_value>"
service:
-
name: "default_name_27 (source firewall.service.custom.name firewall.service.group.name)"
srcaddr:
-
name: "default_name_29 (source firewall.address6.name firewall.addrgrp6.name)"
status: "enable"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |