fortinet.fortios.fortios_firewall_shaper_traffic_shaper module – Configure shared traffic shaper in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.8).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_shaper_traffic_shaper
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall_shaper feature and traffic_shaper category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Configure shared traffic shaper. |
|
Unit of measurement for guaranteed and maximum bandwidth for this shaper (Kbps, Mbps or Gbps). Choices:
|
|
VLAN CoS mark. |
|
Enable/disable VLAN CoS marking. Choices:
|
|
Select VLAN CoS marking method. Choices:
|
|
Enable/disable changing the DiffServ setting applied to traffic accepted by this shaper. Choices:
|
|
DiffServ setting to be applied to traffic accepted by this shaper. |
|
Select DSCP marking method. Choices:
|
|
Exceed bandwidth used for DSCP/VLAN CoS multi-stage marking. Units depend on the bandwidth-unit setting. |
|
Class ID for traffic in guaranteed-bandwidth and maximum-bandwidth. Source firewall.traffic-class.class-id. |
|
VLAN CoS mark for traffic in [guaranteed-bandwidth, exceed-bandwidth]. |
|
DSCP mark for traffic in guaranteed-bandwidth and exceed-bandwidth. |
|
Amount of bandwidth guaranteed for this shaper (0 - 80000000). Units depend on the bandwidth-unit setting. |
|
Upper bandwidth limit enforced by this shaper (0 - 80000000). 0 means no limit. Units depend on the bandwidth-unit setting. |
|
VLAN CoS mark for traffic in [exceed-bandwidth, maximum-bandwidth]. |
|
DSCP mark for traffic in exceed-bandwidth and maximum-bandwidth. |
|
Traffic shaper name. |
|
Per-packet size overhead used in rate computations. |
|
Enable/disable applying a separate shaper for each policy. For example, if enabled the guaranteed bandwidth is applied separately for each policy. Choices:
|
|
Higher priority traffic is more likely to be forwarded without delays and without compromising the guaranteed bandwidth. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: Configure shared traffic shaper.
fortinet.fortios.fortios_firewall_shaper_traffic_shaper:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_shaper_traffic_shaper:
bandwidth_unit: "kbps"
cos: "<your_own_value>"
cos_marking: "enable"
cos_marking_method: "multi-stage"
diffserv: "enable"
diffservcode: "<your_own_value>"
dscp_marking_method: "multi-stage"
exceed_bandwidth: "0"
exceed_class_id: "0"
exceed_cos: "<your_own_value>"
exceed_dscp: "<your_own_value>"
guaranteed_bandwidth: "0"
maximum_bandwidth: "0"
maximum_cos: "<your_own_value>"
maximum_dscp: "<your_own_value>"
name: "default_name_18"
overhead: "0"
per_policy: "disable"
priority: "low"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |
Authors
Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)