fortinet.fortios.fortios_system_snmp_user module – SNMP user configuration in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.3.8).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_system_snmp_user.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system_snmp feature and user category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.15

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

system_snmp_user

dictionary

SNMP user configuration.

auth_proto

string

Authentication protocol.

Choices:

  • "md5"

  • "sha"

  • "sha224"

  • "sha256"

  • "sha384"

  • "sha512"

auth_pwd

string

Password for authentication protocol.

events

list / elements=string

SNMP notifications (traps) to send.

Choices:

  • "cpu-high"

  • "mem-low"

  • "log-full"

  • "intf-ip"

  • "vpn-tun-up"

  • "vpn-tun-down"

  • "ha-switch"

  • "ha-hb-failure"

  • "ips-signature"

  • "ips-anomaly"

  • "av-virus"

  • "av-oversize"

  • "av-pattern"

  • "av-fragmented"

  • "fm-if-change"

  • "fm-conf-change"

  • "bgp-established"

  • "bgp-backward-transition"

  • "ha-member-up"

  • "ha-member-down"

  • "ent-conf-change"

  • "av-conserve"

  • "av-bypass"

  • "av-oversize-passed"

  • "av-oversize-blocked"

  • "ips-pkg-update"

  • "ips-fail-open"

  • "faz-disconnect"

  • "faz"

  • "wc-ap-up"

  • "wc-ap-down"

  • "fswctl-session-up"

  • "fswctl-session-down"

  • "load-balance-real-server-down"

  • "device-new"

  • "per-cpu-high"

  • "dhcp"

  • "pool-usage"

  • "ippool"

  • "interface"

  • "ospf-nbr-state-change"

  • "ospf-virtnbr-state-change"

  • "temperature-high"

  • "voltage-alert"

  • "power-supply"

  • "fan-failure"

  • "power-supply-failure"

ha_direct

string

Enable/disable direct management of HA cluster members.

Choices:

  • "enable"

  • "disable"

interface

string

Specify outgoing interface to reach server. Source system.interface.name.

interface_select_method

string

Specify how to select outgoing interface to reach server.

Choices:

  • "auto"

  • "sdwan"

  • "specify"

mib_view

string

SNMP access control MIB view. Source system.snmp.mib-view.name.

name

string / required

SNMP user name.

notify_hosts

list / elements=string

SNMP managers to send notifications (traps) to.

notify_hosts6

list / elements=string

IPv6 SNMP managers to send notifications (traps) to.

priv_proto

string

Privacy (encryption) protocol.

Choices:

  • "aes"

  • "des"

  • "aes256"

  • "aes256cisco"

priv_pwd

string

Password for privacy (encryption) protocol.

queries

string

Enable/disable SNMP queries for this user.

Choices:

  • "enable"

  • "disable"

query_port

integer

SNMPv3 query port .

security_level

string

Security level for message authentication and encryption.

Choices:

  • "no-auth-no-priv"

  • "auth-no-priv"

  • "auth-priv"

source_ip

string

Source IP for SNMP trap.

source_ipv6

string

Source IPv6 for SNMP trap.

status

string

Enable/disable this SNMP user.

Choices:

  • "enable"

  • "disable"

trap_lport

integer

SNMPv3 local trap port .

trap_rport

integer

SNMPv3 trap remote port .

trap_status

string

Enable/disable traps for this SNMP user.

Choices:

  • "enable"

  • "disable"

vdoms

list / elements=dictionary

SNMP access control VDOMs.

name

string / required

VDOM name. Source system.vdom.name.

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

  • The module supports check_mode.

Examples

- name: SNMP user configuration.
  fortinet.fortios.fortios_system_snmp_user:
      vdom: "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      system_snmp_user:
          auth_proto: "md5"
          auth_pwd: "<your_own_value>"
          events: "cpu-high"
          ha_direct: "enable"
          interface: "<your_own_value> (source system.interface.name)"
          interface_select_method: "auto"
          mib_view: "<your_own_value> (source system.snmp.mib-view.name)"
          name: "default_name_10"
          notify_hosts: "<your_own_value>"
          notify_hosts6: "<your_own_value>"
          priv_proto: "aes"
          priv_pwd: "<your_own_value>"
          queries: "enable"
          query_port: "161"
          security_level: "no-auth-no-priv"
          source_ip: "84.230.14.43"
          source_ipv6: "<your_own_value>"
          status: "enable"
          trap_lport: "162"
          trap_rport: "162"
          trap_status: "enable"
          vdoms:
              -
                  name: "default_name_25 (source system.vdom.name)"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)