fortinet.fortios.fortios_system_vdom_sflow module – Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.8).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_system_vdom_sflow
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and vdom_sflow category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow collector. |
|
IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to . |
|
UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535). |
|
sFlow collectors. |
|
IP addresses of the sFlow collectors that sFlow agents added to interfaces in this VDOM send sFlow datagrams to. |
|
UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535). |
|
ID. see <a href=’#notes’>Notes</a>. |
|
Specify outgoing interface to reach server. Source system.interface.name. |
|
Specify how to select outgoing interface to reach server. Choices:
|
|
Source IP address for sFlow agent. |
|
Specify outgoing interface to reach server. Source system.interface.name. |
|
Specify how to select outgoing interface to reach server. Choices:
|
|
Source IP address for sFlow agent. |
|
Enable/disable the sFlow configuration for the current VDOM. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- name: Configure sFlow per VDOM to add or change the IP address and UDP port that FortiGate sFlow agents in this VDOM use to send sFlow datagrams to an sFlow
collector.
fortinet.fortios.fortios_system_vdom_sflow:
vdom: "{{ vdom }}"
system_vdom_sflow:
collector_ip: "<your_own_value>"
collector_port: "6343"
collectors:
-
collector_ip: "<your_own_value>"
collector_port: "6343"
id: "8"
interface: "<your_own_value> (source system.interface.name)"
interface_select_method: "auto"
source_ip: "84.230.14.43"
interface: "<your_own_value> (source system.interface.name)"
interface_select_method: "auto"
source_ip: "84.230.14.43"
vdom_sflow: "enable"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |