fortinet.fortios.fortios_wanopt_auth_group module – Configure WAN optimization authentication groups in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.8).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_wanopt_auth_group
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wanopt feature and auth_group category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
|
Configure WAN optimization authentication groups. |
|
Select certificate or pre-shared key authentication for this authentication group. Choices:
|
|
Name of certificate to identify this peer. Source vpn.certificate.local.name. |
|
Auth-group name. |
|
If peer-accept is set to one, select the name of one peer to add to this authentication group. The peer must have added with the wanopt peer command. Source wanopt.peer.peer-host-id. |
|
Determine if this auth group accepts, any peer, a list of defined peers, or just one peer. Choices:
|
|
Pre-shared key used by the peers in this authentication group. |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: Configure WAN optimization authentication groups.
fortinet.fortios.fortios_wanopt_auth_group:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
wanopt_auth_group:
auth_method: "cert"
cert: "<your_own_value> (source vpn.certificate.local.name)"
name: "default_name_5"
peer: "<your_own_value> (source wanopt.peer.peer-host-id)"
peer_accept: "any"
psk: "<your_own_value>"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |