fortinet.fortios.fortios_web_proxy_global module – Configure Web proxy global settings in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.9).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_web_proxy_global
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify web_proxy feature and global category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
|
Configure Web proxy global settings. |
|
Enable/disable learning the client”s IP address from headers for every request. Choices:
|
|
Enable/disable fast matching algorithm for explicit and transparent proxy policy. Choices:
|
|
Enable/disable forwarding proxy authentication headers. Choices:
|
|
Period of time before the source IP”s traffic is no longer assigned to the forwarding server (6 - 60 min). |
|
Enable/disable LDAP user cache for explicit and transparent proxy user. Choices:
|
|
Enable/disable learning the client”s IP address from headers. Choices:
|
|
Learn client IP address from the specified headers. Choices:
|
|
Source address name (srcaddr or srcaddr6 must be set). |
|
Address name. Source firewall.address.name firewall.addrgrp.name. |
|
IPv6 Source address name (srcaddr or srcaddr6 must be set). |
|
Address name. Source firewall.address6.name firewall.addrgrp6.name. |
|
Enable/disable always log application type in traffic log. Choices:
|
|
Enable/disable forward server name logging in forward traffic log. Choices:
|
|
Enable/disable logging sessions that are pending on policy matching. Choices:
|
|
Maximum length of HTTP message, not including body (16 - 256 Kbytes). |
|
Maximum length of HTTP request line (2 - 64 Kbytes). |
|
Maximum length of HTTP messages processed by Web Application Firewall (WAF) (10 - 1024 Kbytes). |
|
Enable/disable deep inspection for application level category policy matching. Choices:
|
|
Fully Qualified Domain Name (FQDN) that clients connect to to connect to the explicit web proxy. |
|
Enable/disable transparent proxy certificate inspection. Choices:
|
|
IPv4 source addresses to exempt proxy affinity. |
|
IPv6 source addresses to exempt proxy affinity. |
|
SSL CA certificate for SSL interception. Source vpn.certificate.local.name. |
|
SSL certificate for SSL interception. Source vpn.certificate.local.name. |
|
Enable/disable strict web checking to block web sites that send incorrect headers that don”t conform to HTTP 1.1. Choices:
|
|
Enable/disable allowing non-HTTP traffic. Allowed non-HTTP traffic is tunneled. Choices:
|
|
Action to take when an unknown version of HTTP is encountered: reject, allow (tunnel), or proceed with best-effort. Choices:
|
|
Name of the web proxy profile to apply when explicit proxy traffic is allowed by default and traffic is accepted that does not match an explicit proxy policy. Source web-proxy.profile.name. |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: Configure Web proxy global settings.
fortinet.fortios.fortios_web_proxy_global:
vdom: "{{ vdom }}"
web_proxy_global:
always_learn_client_ip: "enable"
fast_policy_match: "enable"
forward_proxy_auth: "enable"
forward_server_affinity_timeout: "30"
ldap_user_cache: "enable"
learn_client_ip: "enable"
learn_client_ip_from_header: "true-client-ip"
learn_client_ip_srcaddr:
-
name: "default_name_11 (source firewall.address.name firewall.addrgrp.name)"
learn_client_ip_srcaddr6:
-
name: "default_name_13 (source firewall.address6.name firewall.addrgrp6.name)"
log_app_id: "enable"
log_forward_server: "enable"
log_policy_pending: "enable"
max_message_length: "32"
max_request_length: "8"
max_waf_body_cache_length: "32"
policy_category_deep_inspect: "enable"
proxy_fqdn: "<your_own_value>"
proxy_transparent_cert_inspection: "enable"
src_affinity_exempt_addr: "<your_own_value>"
src_affinity_exempt_addr6: "<your_own_value>"
ssl_ca_cert: "<your_own_value> (source vpn.certificate.local.name)"
ssl_cert: "<your_own_value> (source vpn.certificate.local.name)"
strict_web_check: "enable"
tunnel_non_http: "enable"
unknown_http_version: "reject"
webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |