fortinet.fortios.fortios_wireless_controller_apcfg_profile module – Configure AP local configuration profiles in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.8).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_wireless_controller_apcfg_profile
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and apcfg_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
|
Configure AP local configuration profiles. |
|
IP address of the validation controller that AP must be able to join after applying AP local configuration. |
|
Port of the validation controller that AP must be able to join after applying AP local configuration (1024 - 49150). |
|
Maximum waiting time for the AP to join the validation controller after applying AP local configuration (3 - 30 min). |
|
Validation controller type . Choices:
|
|
FortiAP family type . Choices:
|
|
AP local configuration command list. |
|
Command ID. see <a href=’#notes’>Notes</a>. |
|
AP local configuration command name. |
|
AP local configuration command password value. |
|
The command type . Choices:
|
|
AP local configuration command value. |
|
Comment. |
|
AP local configuration profile name. |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: Configure AP local configuration profiles.
fortinet.fortios.fortios_wireless_controller_apcfg_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
wireless_controller_apcfg_profile:
ac_ip: "<your_own_value>"
ac_port: "5246"
ac_timer: "10"
ac_type: "default"
ap_family: "fap"
command_list:
-
id: "9"
name: "default_name_10"
passwd_value: "<your_own_value>"
type: "non-password"
value: "<your_own_value>"
comment: "Comment."
name: "default_name_15"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |