fortinet.fortios.fortios_wireless_controller_qos_profile module – Configure WiFi quality of service (QoS) profiles in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.9).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install fortinet.fortios.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_wireless_controller_qos_profile.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and qos_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
|---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
|
Configure WiFi quality of service (QoS) profiles. |
|
Enable/disable WMM bandwidth admission control. Choices:
|
|
Maximum bandwidth capacity allowed (1 - 600000 Kbps). |
|
Enable/disable client rate burst. Choices:
|
|
Enable/disable WMM call admission control. Choices:
|
|
Maximum number of Voice over WLAN (VoWLAN) phones allowed (0 - 60). |
|
Comment. |
|
Maximum downlink bandwidth for Virtual Access Points (VAPs) (0 - 2097152 Kbps). |
|
Maximum downlink bandwidth for clients (0 - 2097152 Kbps). |
|
DSCP mapping for best effort access . |
|
DSCP WMM mapping numbers (0 - 63). see <a href=’#notes’>Notes</a>. |
|
DSCP mapping for background access . |
|
DSCP WMM mapping numbers (0 - 63). see <a href=’#notes’>Notes</a>. |
|
Enable/disable Differentiated Services Code Point (DSCP) mapping. Choices:
|
|
DSCP mapping for video access . |
|
DSCP WMM mapping numbers (0 - 63). see <a href=’#notes’>Notes</a>. |
|
DSCP mapping for voice access . |
|
DSCP WMM mapping numbers (0 - 63). see <a href=’#notes’>Notes</a>. |
|
WiFi QoS profile name. |
|
Maximum uplink bandwidth for Virtual Access Points (VAPs) (0 - 2097152 Kbps). |
|
Maximum uplink bandwidth for clients (0 - 2097152 Kbps). |
|
Enable/disable WiFi multi-media (WMM) control. Choices:
|
|
DSCP marking for best effort access . |
|
DSCP marking for background access . |
|
Enable/disable WMM Differentiated Services Code Point (DSCP) marking. Choices:
|
|
Enable/disable WMM Unscheduled Automatic Power Save Delivery (U-APSD) power save mode. Choices:
|
|
DSCP marking for video access . |
|
DSCP marking for voice access . |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: Configure WiFi quality of service (QoS) profiles.
fortinet.fortios.fortios_wireless_controller_qos_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
wireless_controller_qos_profile:
bandwidth_admission_control: "enable"
bandwidth_capacity: "2000"
burst: "enable"
call_admission_control: "enable"
call_capacity: "10"
comment: "Comment."
downlink: "0"
downlink_sta: "0"
dscp_wmm_be:
-
id: "12"
dscp_wmm_bk:
-
id: "14"
dscp_wmm_mapping: "enable"
dscp_wmm_vi:
-
id: "17"
dscp_wmm_vo:
-
id: "19"
name: "default_name_20"
uplink: "0"
uplink_sta: "0"
wmm: "enable"
wmm_be_dscp: "0"
wmm_bk_dscp: "8"
wmm_dscp_marking: "enable"
wmm_uapsd: "enable"
wmm_vi_dscp: "32"
wmm_vo_dscp: "48"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |