fortinet.fortios.fortios_wireless_controller_setting module – VDOM wireless controller configuration in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.9).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_wireless_controller_setting
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and setting category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.15
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
|
VDOM wireless controller configuration. |
|
FortiCloud customer account ID. |
|
Country or region in which the FortiGate is located. The country determines the 802.11 bands and channels that are available. Choices:
|
|
Time for running Distributed Automatic Radio Resource Provisioning (DARRP) optimizations (0 - 86400 sec). |
|
Firewall schedules for DARRP running time. DARRP will run periodically based on darrp-optimize within the schedules. Separate multiple schedule names with a space. |
|
Schedule name. Source firewall.schedule.group.name firewall.schedule.recurring.name firewall.schedule.onetime.name. |
|
Lower limit of creation time of device for identification in minutes (0 - 60). |
|
Upper limit of idle time of device for identification in minutes (0 - 14400). |
|
Upper limit of confidence of device for identification (0 - 255). |
|
Enable/disable allowing Virtual Access Points (VAPs) to use the same SSID name in the same VDOM. Choices:
|
|
Actions taken for detected fake SSID. Choices:
|
|
Enable/disable FAP-C series compatibility. Choices:
|
|
Enable/disable automatic provisioning of latest firmware on authorization. Choices:
|
|
Configure offending SSID. |
|
Actions taken for detected offending SSID. Choices:
|
|
ID. see <a href=’#notes’>Notes</a>. |
|
Define offending SSID pattern (case insensitive). For example, word, word*, *word, wo*rd. |
|
Enable/disable phishing SSID detection. Choices:
|
|
Enable/disable rolling WTP upgrade . Choices:
|
|
Enable/disable WFA compatibility. Choices:
|
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
The module supports check_mode.
Examples
- name: VDOM wireless controller configuration.
fortinet.fortios.fortios_wireless_controller_setting:
vdom: "{{ vdom }}"
wireless_controller_setting:
account_id: "<your_own_value>"
country: "--"
darrp_optimize: "86400"
darrp_optimize_schedules:
-
name: "default_name_7 (source firewall.schedule.group.name firewall.schedule.recurring.name firewall.schedule.onetime.name)"
device_holdoff: "5"
device_idle: "1440"
device_weight: "1"
duplicate_ssid: "enable"
fake_ssid_action: "log"
fapc_compatibility: "enable"
firmware_provision_on_authorization: "enable"
offending_ssid:
-
action: "log"
id: "17"
ssid_pattern: "<your_own_value>"
phishing_ssid_detect: "enable"
rolling_wtp_upgrade: "enable"
wfa_compatibility: "enable"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |