junipernetworks.junos.junos_acl_interfaces module – ACL interfaces resource module

Note

This module is part of the junipernetworks.junos collection (version 9.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_acl_interfaces.

New in junipernetworks.junos 1.0.0

Synopsis 

This module manages adding and removing Access Control Lists (ACLs) from interfaces on devices running Juniper JUNOS.

Requirements 

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)
xmltodict (>=0.12.0)

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of ACL options for interfaces.
access_groups list / elements=dictionary	Specifies ACLs attached to the interface.
acls list / elements=dictionary	Specifies the ACLs for the provided AFI.
direction string	Specifies the direction of packets that the ACL will be applied on. Choices: `"in"` `"out"`
name string	Specifies the name of the IPv4/IPv4 ACL for the interface.
afi string	Specifies the AFI for the ACL(s) to be configured on this interface. Choices: `"ipv4"` `"ipv6"`
name string	Name/Identifier for the interface.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show interfaces. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result
state string	The state the configuration should be left in. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

This module requires the netconf system service be enabled on the device being managed.
This module works with connection netconf. See the Junos OS Platform Options.
Tested against JunOS v18.4R1

Examples 

# Using deleted

# Before state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface with filter";
#     unit 0 {
#         family inet {
#             filter {
#                 input inbound_acl;
#                 output outbound_acl;
#             }
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }

- name: Delete JUNOS L3 interface filter
  junipernetworks.junos.junos_acl_interfaces:
    config:
      - name: ge-1/0/0
        access_groups:
          - afi: ipv4
            acls:
              - name: inbound_acl
                direction: in
              - name: outbound_acl
                direction: out
    state: deleted

# After state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface with filter";
#     unit 0 {
#         family inet {
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }


# Using merged

# Before state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface without filter";
#     unit 0 {
#         family inet {
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }

- name: Merge JUNOS L3 interface filter
  junipernetworks.junos.junos_acl_interfaces:
    config:
      - name: ge-1/0/0
        access_groups:
          - afi: ipv4
            acls:
              - name: inbound_acl
                direction: in
              - name: outbound_acl
                direction: out
    state: merged

# After state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface with filter";
#     unit 0 {
#         family inet {
#             filter {
#                 input inbound_acl;
#                 output outbound_acl;
#             }
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }


# Using overridden

# Before state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface without filter";
#     unit 0 {
#         family inet {
#             filter {
#                 input foo_acl;
#             }
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }

- name: Override JUNOS L3 interface filter
  junipernetworks.junos.junos_acl_interfaces:
    config:
      - name: ge-1/0/0
        access_groups:
          - afi: ipv4
            acls:
              - name: inbound_acl
                direction: in
              - name: outbound_acl
                direction: out
    state: overridden

# After state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface with filter";
#     unit 0 {
#         family inet {
#             filter {
#                 input inbound_acl;
#                 output outbound_acl;
#             }
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }


# Using replaced

# Before state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface without filter";
#     unit 0 {
#         family inet {
#             filter {
#                 input foo_acl;
#                 output outbound_acl;
#             }
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }

- name: Replace JUNOS L3 interface filter
  junipernetworks.junos.junos_acl_interfaces:
    config:
      - name: ge-1/0/0
        access_groups:
          - afi: ipv4
            acls:
              - name: inbound_acl
                direction: in
    state: replaced

# After state:
# -------------
#
# admin# show interfaces
# ge-1/0/0 {
#     description "L3 interface with filter";
#     unit 0 {
#         family inet {
#             filter {
#                 input inbound_acl;
#                 output outbound_acl;
#             }
#             address 100.64.0.1/10;
#             address 100.64.0.2/10;
#         }
#         family inet6;
#     }

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration prior to the model invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["command 1", "command 2", "command 3"]`

Authors

Daniel Mellado (@dmellado)

junipernetworks.junos.junos_acl_interfaces module – ACL interfaces resource module

Synopsis

Requirements

Parameters

Notes

Examples

Return Values