netapp.ontap.na_ontap_fdspt – NetApp ONTAP create, delete or modify File Directory security policy tasks

Note

This plugin is part of the netapp.ontap collection (version 21.13.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_fdspt.

New in version 21.8.0: of netapp.ontap

Synopsis

  • Create, modify or remove file directory security policy tasks.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.

  • REST support requires ONTAP 9.6 or later.

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
access_control
string
    Choices:
  • file_directory
  • slag
Specifies access control of the task.
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
index_num
integer
Specifies the index number of a task. Tasks are applied in order. A task with a larger index value is applied after a task with a lower index number. If you do not specify this optional parameter, new tasks are applied to the end of the index list.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
name
string / required
Specifies the name of the policy the task will be associated with.
ntfs_mode
string
    Choices:
  • propagate
  • ignore
  • replace
Specifies NTFS propagation mode.
ntfs_sd
list / elements=string
Specifies the NTFS security descriptor name.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
path
string / required
Specifies the file or folder path of the task. In case of SLAG this path specify the volume or qtree mounted path.
security_type
string
    Choices:
  • ntfs
  • nfsv4
Specifies the type of security. If not specified ONTAP will default to ntfs.
state
string
    Choices:
  • present ←
  • absent
Whether the specified Policy Task should exist or not.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
Specifies the vserver for the File Directory security policy.

Notes

Note

  • check_mode is supported for this module.

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: Create File Directory Security Policy Task
  netapp.ontap.na_ontap_na_ontap_fdspt:
    state: present
    name: "ansible_pl"
    access_control: "file_directory"
    ntfs_sd: "ansible1_sd"
    ntfs_mode: "replace"
    security_type: "ntfs"
    path: "/volume1"
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

- name: Modify File Directory Security Policy Task
  netapp.ontap.na_ontap_na_ontap_fdspt:
    state: present
    name: "ansible_pl"
    access_control: "file_directory"
    path: "/volume1"
    ntfs_sd: "ansible1_sd"
    ntfs_mode: "replace"
    security_type: "ntfs"
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

- name: Remove File Directory Security Policy Task
  netapp.ontap.na_ontap_na_ontap_fdspt:
    state: absent
    vserver: "SVM1"
    name: "ansible_pl"
    access_control: "file_directory"
    path: "/volume1"
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

Authors