netapp.ontap.na_ontap_ntfs_sd module – NetApp ONTAP create, delete or modify NTFS security descriptor
Note
This module is part of the netapp.ontap collection (version 22.13.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install netapp.ontap.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: netapp.ontap.na_ontap_ntfs_sd.
New in netapp.ontap 20.4.0
Synopsis
Create, modify or destroy NTFS security descriptor
Requirements
The below requirements are needed on the host that executes this module.
Ansible 2.9 or later - 2.12 or later is recommended.
Python3 - 3.9 or later is recommended.
When using ZAPI, netapp-lib 2018.11.13 or later (install using ‘pip install netapp-lib’), netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
A physical or virtual clustered Data ONTAP system, the modules support Data ONTAP 9.1 and onward, REST support requires ONTAP 9.6 or later.
Parameters
Parameter |
Comments |
|---|---|
path to SSL client cert file (.pem). not supported with python 2.6. |
|
Specifies the security descriptor control flags. 1… …. …. …. = Self Relative .0.. …. …. …. = RM Control Valid ..0. …. …. …. = SACL Protected …0 …. …. …. = DACL Protected …. 0… …. …. = SACL Inherited …. .0.. …. …. = DACL Inherited …. ..0. …. …. = SACL Inherit Required …. …0 …. …. = DACL Inherit Required …. …. ..0. …. = SACL Defaulted …. …. …0 …. = SACL Present …. …. …. 0… = DACL Defaulted …. …. …. .1.. = DACL Present …. …. …. ..0. = Group Defaulted …. …. …. …0 = Owner Defaulted At present only the following flags are honored. Others are ignored. ..0. …. …. …. = SACL Protected …0 …. …. …. = DACL Protected …. …. ..0. …. = SACL Defaulted …. …. …. 0… = DACL Defaulted …. …. …. ..0. = Group Defaulted …. …. …. …0 = Owner Defaulted Convert the 16 bit binary flags and convert to decimal for the input. |
|
Enable or disable a new feature. This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility. Supported keys and values are subject to change without notice. Unknown keys are ignored. |
|
Override the cluster ONTAP version when using REST. The behavior is undefined if the version does not match the target cluster. This is provided as a work-around when the cluster version cannot be read because of permission issues. See https://github.com/ansible-collections/netapp.ontap/wiki/Known-issues. This should be in the form 9.10 or 9.10.1 with each element being an integer number. When Ignored with ZAPI. |
|
Specifies the group’s SID or domain account of the NTFS security descriptor. Need to provide the full path of the group. |
|
The hostname or IP address of the ONTAP instance. |
|
Override the default port (80 or 443) with this port |
|
Enable and disable https. Ignored when using REST as only https is supported. Ignored when using SSL certificate authentication as it requires SSL. Choices:
|
|
path to SSL client key file. |
|
Specifies the NTFS security descriptor name. Not modifiable. |
|
The ontap api version to use |
|
Specifies the owner’s SID or domain account of the NTFS security descriptor. Need to provide the full path of the owner. |
|
Password for the specified user. |
|
Whether the specified NTFS security descriptor should exist or not. Choices:
|
|
Whether to use REST or ZAPI. always – will always use the REST API if the module supports REST. A warning is issued if the module does not support REST. An error is issued if a module option is not supported in REST. never – will always use ZAPI if the module supports ZAPI. An error may be issued if a REST option is not supported in ZAPI. auto – will try to use the REST API if the module supports REST and modules options are supported. Reverts to ZAPI otherwise. Default: |
|
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/. Two authentication methods are supported
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled. |
|
If set to This should only set to Choices:
|
|
Specifies the vserver for the NTFS security descriptor. |
Notes
Note
The modules prefixed with na_ontap are built to support the ONTAP storage platform.
https is enabled by default and recommended. To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’
Examples
- name: Create NTFS Security Descriptor
na_ontap_ntfs_sd:
state: present
vserver: SVM1
name: ansible_sd
owner: DOMAIN\Account
group: DOMAIN\Group
control_flags_raw: 0
hostname: "{{ hostname }}"
username: "{{ username }}"
password: "{{ password }}"
- name: Modify NTFS Security Descriptor
na_ontap_ntfs_sd:
state: present
vserver: SVM1
name: ansible_sd
owner: DOMAIN\Account
group: DOMAIN\Group
control_flags_raw: 0
hostname: "{{ hostname }}"
username: "{{ username }}"
password: "{{ password }}"
- name: Delete NTFS Security Descriptor
na_ontap_ntfs_sd:
state: absent
vserver: SVM1
name: ansible_sd
hostname: "{{ hostname }}"
username: "{{ username }}"
password: "{{ password }}"