netapp.ontap.na_ontap_security_ipsec_policy module – NetApp ONTAP module to create, modify or delete security IPsec policy.

Note

This module is part of the netapp.ontap collection (version 22.13.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: netapp.ontap.na_ontap_security_ipsec_policy.

New in netapp.ontap 22.1.0

Synopsis

• Create, modify or delete security IPsec policy.

Requirements

The below requirements are needed on the host that executes this module.

• Ansible 2.9 or later - 2.12 or later is recommended.

• Python3 - 3.9 or later is recommended.

• When using ZAPI, netapp-lib 2018.11.13 or later (install using ‘pip install netapp-lib’), netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

• A physical or virtual clustered Data ONTAP system, the modules support Data ONTAP 9.1 and onward, REST support requires ONTAP 9.6 or later.

Parameters

Parameter	Comments
action string	Action for the IPsec policy. Cannot modify after create. Choices: "bypass" "discard" "esp_transport" "esp_udp"
authentication_method string	Authentication method for the IPsec policy. Supported from 9.10.1 or later. Cannot modify after create. Choices: "none" "psk" "pki"
cert_filepath string added in netapp.ontap 20.6.0	path to SSL client cert file (.pem). not supported with python 2.6.
certificate string	Certificate for the IPsec policy. Supported from 9.10.1 or later. Required when authentication_method is ‘pki’ in create.
enabled boolean	Indicates whether or not the policy is enabled. Choices: false true
feature_flags dictionary added in netapp.ontap 20.5.0	Enable or disable a new feature. This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility. Supported keys and values are subject to change without notice. Unknown keys are ignored.
force_ontap_version string added in netapp.ontap 21.23.0	Override the cluster ONTAP version when using REST. The behavior is undefined if the version does not match the target cluster. This is provided as a work-around when the cluster version cannot be read because of permission issues. See https://github.com/ansible-collections/netapp.ontap/wiki/Known-issues. This should be in the form 9.10 or 9.10.1 with each element being an integer number.
hostname string / required	The hostname or IP address of the ONTAP instance.
http_port integer	Override the default port (80 or 443) with this port
https boolean	Enable and disable https. Ignored when using REST as only https is supported. Ignored when using SSL certificate authentication as it requires SSL. Choices: false ← (default) true
ipspace string	IPspace name where svm exist.
key_filepath string added in netapp.ontap 20.6.0	path to SSL client key file.
local_endpoint dictionary	Local endpoint for the IPsec policy.
address string / required	IPv4 or IPv6 address.
netmask string / required	Input as netmask length (16) or IPv4 mask (255.255.0.0). For IPv6, the default value is 64 with a valid range of 1 to 127.
port string	Application port to be covered by the IPsec policy, example 23.
local_identity string	local IKE endpoint’s identity for authentication purpose.
name string / required	Name of the security IPsec policy
password aliases: pass string	Password for the specified user.
protocol string	protocol to be protected by by this policy. example ‘any’ or ‘0’, ‘tcp’, ‘udp’ or protocol number.
remote_endpoint dictionary	remote endpoint for the IPsec policy.
address string / required	IPv4 or IPv6 address.
netmask string / required	Input as netmask length (16) or IPv4 mask (255.255.0.0). For IPv6, the default value is 64 with a valid range of 1 to 127.
port string	Application port to be covered by the IPsec policy, example 23 or 23-23.
remote_identity string	remote IKE endpoint’s identity for authentication purpose.
secret_key string	Pre-shared key for IKE negotiation. Required when authentication_method is ‘psk’ in create. Cannot modify after create.
state string	Create or delete security IPsec policy. Choices: "present" ← (default) "absent"
svm string	The name of the SVM. Required when creating security IPsec policy.
use_rest string	This module only supports REST. always – will always use the REST API. A warning is issued if the module does not support REST. Default: "always"
username aliases: user string	This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/. Two authentication methods are supported basic authentication, using username and password, SSL certificate authentication, using a ssl client cert file, and optionally a private key file. To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.
validate_certs boolean	If set to no, the SSL certificates will not be validated. This should only set to False used on personally controlled sites using self-signed certificates. Choices: false true ← (default)

Notes

Note

• Supports check_mode.

• Only supported with REST and requires ONTAP 9.8 or later.

• The modules prefixed with na_ontap are built to support the ONTAP storage platform.

• https is enabled by default and recommended. To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Examples

- name: Create security IPsec policy with pre-shared Keys.
  netapp.ontap.na_ontap_security_ipsec_policy:
    name: ipsec_policy_psk
    ipspace: Default
    svm: ansibleSVM
    authentication_method: psk
    secret_key: "{{ secret_key }}"
    action: esp_transport
    local_endpoint:
      address: 10.23.43.23
      netmask: 24
      port: 201
    remote_endpoint:
      address: 10.23.43.30
      netmask: 24
      port: 205
    protocol: tcp
    enabled: true
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    https: true
    validate_certs: "{{ validate_certs }}"

- name: Create security IPsec policy with certificates.
  netapp.ontap.na_ontap_security_ipsec_policy:
    name: ipsec_policy_pki
    ipspace: Default
    svm: ansibleSVM
    authentication_method: pki
    certificate: "{{ cert_name }}"
    action: esp_transport
    local_endpoint:
      address: 10.23.43.23
      netmask: 24
      port: 201
    remote_endpoint:
      address: 10.23.43.30
      netmask: 24
      port: 205
    protocol: tcp
    enabled: true
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    https: true
    validate_certs: "{{ validate_certs }}"

- name: Create security IPsec policy without psk or certificates.
  netapp.ontap.na_ontap_security_ipsec_policy:
    name: ipsec_policy_none
    ipspace: Default
    svm: ansibleSVM
    action: bypass
    local_endpoint:
      address: 10.23.43.23
      netmask: 24
      port: 201
    remote_endpoint:
      address: 10.23.43.30
      netmask: 24
      port: 205
    protocol: tcp
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    https: true
    validate_certs: "{{ validate_certs }}"

- name: Modify security IPsec policy local, remote end_point.
  netapp.ontap.na_ontap_security_ipsec_policy:
    name: ipsec_policy_pki
    ipspace: Default
    svm: ansibleSVM
    authentication_method: pki
    certificate: "{{ cert_name }}"
    action: esp_transport
    local_endpoint:
      address: 10.23.43.50
      netmask: 24
      port: 201
    remote_endpoint:
      address: 10.23.43.60
      netmask: 24
      port: 205
    protocol: tcp
    enabled: true
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    https: true
    validate_certs: "{{ validate_certs }}"

- name: Modify security IPsec protocol, enable options.
  netapp.ontap.na_ontap_security_ipsec_policy:
    name: ipsec_policy_pki
    ipspace: Default
    svm: ansibleSVM
    authentication_method: pki
    certificate: "{{ cert_name }}"
    action: esp_transport
    local_endpoint:
      address: 10.23.43.50
      netmask: 24
      port: 201
    remote_endpoint:
      address: 10.23.43.60
      netmask: 24
      port: 205
    protocol: udp
    enabled: false
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    https: true
    validate_certs: "{{ validate_certs }}"

- name: Delete security IPsec policy.
  netapp.ontap.na_ontap_security_ipsec_policy:
    name: ipsec_policy_pki
    svm: ansibleSVM
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    https: true
    validate_certs: "{{ validate_certs }}"

Authors

• NetApp Ansible Team (@carchi8py)

Collection links

• Issue Tracker
• Homepage
• Repository (Sources)