splunk.es.splunk_data_inputs_network module – Manage Splunk Data Inputs of type TCP or UDP resource module

Note

This module is part of the splunk.es collection (version 4.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install splunk.es.

To use it in a playbook, specify: splunk.es.splunk_data_inputs_network.

New in splunk.es 2.1.0

Synopsis

  • Module that allows to add/update or delete of TCP and UDP Data Inputs in Splunk.

Note

This module has a corresponding action plugin.

Aliases: data_inputs_network

Parameters

Parameter

Comments

config

list / elements=dictionary

Manage and preview protocol input data.

cipher_suite

string

Specifies list of acceptable ciphers to use in ssl.

Only obtained for TCP SSL configuration present on device.

connection_host

string

Set the host for the remote server that is sending data.

ip sets the host to the IP address of the remote server sending data.

dns sets the host to the reverse DNS entry for the IP address of the remote server sending data.

none leaves the host as specified in inputs.conf, which is typically the Splunk system hostname.

Choices:

  • "ip"

  • "dns"

  • "none"

datatype

string

cooked lets one access cooked TCP input information and create new containers for managing cooked data.

raw lets one manage raw tcp inputs from forwarders.

splunktcptoken lets one manage receiver access using tokens.

ssl Provides access to the SSL configuration of a Splunk server. This option does not support states deleted and replaced.

Choices:

  • "cooked"

  • "raw"

  • "splunktcptoken"

  • "ssl"

disabled

boolean

Indicates whether the input is disabled.

Choices:

  • false

  • true

host

string

Host from which the indexer gets data.

index

string

default Index to store generated events.

name

string / required

The input port which receives raw data.

no_appending_timestamp

boolean

If set to true, prevents Splunk software from prepending a timestamp and hostname to incoming events.

Only for UDP data input configuration.

Choices:

  • false

  • true

no_priority_stripping

boolean

If set to true, Splunk software does not remove the priority field from incoming syslog events.

Only for UDP data input configuration.

Choices:

  • false

  • true

password

string

Server certificate password, if any.

Only for TCP SSL configuration.

protocol

string / required

Choose whether to manage TCP or UDP inputs

Choices:

  • "tcp"

  • "udp"

queue

string

Specifies where the input processor should deposit the events it reads. Defaults to parsingQueue.

Set queue to parsingQueue to apply props.conf and other parsing rules to your data. For more information about props.conf and rules for timestamping and linebreaking, refer to props.conf and the online documentation at “Monitor files and directories with inputs.conf”

Set queue to indexQueue to send your data directly into the index.

Only applicable for “/tcp/raw” and “/udp” APIs

Choices:

  • "parsingQueue"

  • "indexQueue"

raw_tcp_done_timeout

integer

Specifies in seconds the timeout value for adding a Done-key.

If a connection over the port specified by name remains idle after receiving data for specified number of seconds, it adds a Done-key. This implies the last event is completely received.

Only for TCP raw input configuration.

require_client_cert

string

Determines whether a client must authenticate.

Only for TCP SSL configuration.

restrict_to_host

string

Allows for restricting this input to only accept data from the host specified here.

root_ca

string

Certificate authority list (root file).

Only for TCP SSL configuration.

server_cert

string

Full path to the server certificate.

Only for TCP SSL configuration.

source

string

Sets the source key/field for events from this input. Defaults to the input file path.

Sets the source key initial value. The key is used during parsing/indexing, in particular to set the source field during indexing. It is also the source field used at search time. As a convenience, the chosen string is prepended with ‘source::’.

Note that Overriding the source key is generally not recommended. Typically, the input layer provides a more accurate string to aid in problem analysis and investigation, accurately recording the file from which the data was retrieved. Consider use of source types, tagging, and search wildcards before overriding this value.

sourcetype

string

Set the source type for events from this input.

“sourcetype=” is automatically prepended to <string>.

Defaults to audittrail (if signedaudit=true) or fschange (if signedaudit=false).

ssl

boolean

Enable or disble ssl for the data stream

Choices:

  • false

  • true

token

string

Token value to use for SplunkTcpToken. If unspecified, a token is generated automatically.

running_config

string

The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. This value of this option should be the output received from device by executing command.

state

string

The state the configuration should be left in

Choices:

  • "merged" ← (default)

  • "replaced"

  • "deleted"

  • "gathered"

Examples

# Using gathered
# --------------

- name: Gathering information about TCP Cooked Inputs
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: cooked
    state: gathered

# RUN output:
# -----------

# "gathered": [
#     {
#         "connection_host": "ip",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "8101"
#     },
#     {
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "9997"
#     },
#     {
#         "connection_host": "ip",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8101",
#         "restrict_to_host": "default"
#     }
# ]


- name: Gathering information about TCP Cooked Inputs by Name
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: cooked
        name: 9997
    state: gathered

# RUN output:
# -----------

# "gathered": [
#     {
#         "datatype": "cooked",
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "name": "9997",
#         "protocol": "tcp"
#     }
# ]


- name: Gathering information about TCP Raw Inputs
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: raw
    state: gathered

# RUN output:
# -----------

# "gathered": [
#     {
#         "connection_host": "ip",
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "8099",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 10
#     },
#     {
#         "connection_host": "ip",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8100",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 10,
#         "restrict_to_host": "default",
#         "source": "test_source",
#         "sourcetype": "test_source_type"
#     }
# ]

- name: Gathering information about TCP Raw inputs by Name
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: raw
        name: 8099
    state: gathered

# RUN output:
# -----------

# "gathered": [
#     {
#         "connection_host": "ip",
#         "datatype": "raw",
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "8099",
#         "protocol": "tcp",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 10
#     }
# ]

- name: Gathering information about TCP SSL configuration
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: ssl
    state: gathered

# RUN output:
# -----------

# "gathered": [
#     {
#         "cipher_suite": <cipher-suites>,
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "test_host"
#     }
# ]

- name: Gathering information about TCP SplunkTcpTokens
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: splunktcptoken
    state: gathered

# RUN output:
# -----------

# "gathered": [
#     {
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "splunktcptoken://test_token1",
#         "token": <token1>
#     },
#     {
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "splunktcptoken://test_token2",
#         "token": <token2>
#     }
# ]

# Using merged
# ------------

- name: To add the TCP raw config
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: raw
        name: 8100
        connection_host: ip
        disabled: true
        raw_tcp_done_timeout: 9
        restrict_to_host: default
        queue: parsingQueue
        source: test_source
        sourcetype: test_source_type
    state: merged

# RUN output:
# -----------

# "after": [
#     {
#         "connection_host": "ip",
#         "datatype": "raw",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8100",
#         "protocol": "tcp",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 9,
#         "restrict_to_host": "default",
#         "source": "test_source",
#         "sourcetype": "test_source_type"
#     }
# ],
# "before": [
#     {
#         "connection_host": "ip",
#         "datatype": "raw",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8100",
#         "protocol": "tcp",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 10,
#         "restrict_to_host": "default",
#         "source": "test_source",
#         "sourcetype": "test_source_type"
#     }
# ]

- name: To add the TCP cooked config
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: cooked
        name: 8101
        connection_host: ip
        disabled: false
        restrict_to_host: default
    state: merged

# RUN output:
# -----------

# "after": [
#     {
#         "connection_host": "ip",
#         "datatype": "cooked",
#         "disabled": false,
#         "host": "$decideOnStartup",
#         "name": "default:8101",
#         "protocol": "tcp",
#         "restrict_to_host": "default"
#     }
# ],
# "before": [
#     {
#         "connection_host": "ip",
#         "datatype": "cooked",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "name": "default:8101",
#         "protocol": "tcp",
#         "restrict_to_host": "default"
#     }
# ],

- name: To add the Splunk TCP token
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: splunktcptoken
        name: test_token
    state: merged

# RUN output:
# -----------

# "after": [
#     {
#         "datatype": "splunktcptoken",
#         "name": "splunktcptoken://test_token",
#         "protocol": "tcp",
#         "token": <token>
#     }
# ],
# "before": [],

- name: To add the Splunk SSL
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: ssl
        name: test_host
        root_ca: {root CA directory}
        server_cert: {server cretificate directory}
    state: merged

# RUN output:
# -----------

# "after": [
#     {
#         "cipher_suite": <cipher suite>,
#         "datatype": "ssl",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "test_host",
#         "protocol": "tcp"
#     }
# ],
# "before": []


# Using deleted
# -------------

- name: To Delete TCP Raw
  splunk.es.splunk_data_inputs_network:
    config:
      - protocol: tcp
        datatype: raw
        name: default:8100
    state: deleted

# RUN output:
# -----------

# "after": [],
# "before": [
#     {
#         "connection_host": "ip",
#         "datatype": "raw",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8100",
#         "protocol": "tcp",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 9,
#         "restrict_to_host": "default",
#         "source": "test_source",
#         "sourcetype": "test_source_type"
#     }
# ]

# Using replaced
# --------------

- name: Replace existing data inputs networks configuration
  register: result
  splunk.es.splunk_data_inputs_network:
    state: replaced
    config:
      - protocol: tcp
        datatype: raw
        name: 8100
        connection_host: ip
        disabled: true
        host: "$decideOnStartup"
        index: default
        queue: parsingQueue
        raw_tcp_done_timeout: 10
        restrict_to_host: default
        source: test_source
        sourcetype: test_source_type

# RUN output:
# -----------

# "after": [
#     {
#         "connection_host": "ip",
#         "datatype": "raw",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8100",
#         "protocol": "tcp",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 9,
#         "restrict_to_host": "default",
#         "source": "test_source",
#         "sourcetype": "test_source_type"
#     }
# ],
# "before": [
#     {
#         "connection_host": "ip",
#         "datatype": "raw",
#         "disabled": true,
#         "host": "$decideOnStartup",
#         "index": "default",
#         "name": "default:8100",
#         "protocol": "tcp",
#         "queue": "parsingQueue",
#         "raw_tcp_done_timeout": 10,
#         "restrict_to_host": "default",
#         "source": "test_source",
#         "sourcetype": "test_source_type"
#     }
# ],

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration after module execution.

Returned: when changed

Sample: ["This output will always be in the same format as the module argspec.\n"]

before

list / elements=string

The configuration prior to the module execution.

Returned: when state is merged, replaced, deleted

Sample: ["This output will always be in the same format as the module argspec.\n"]

gathered

dictionary

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: "This output will always be in the same format as the module argspec.\n"

Authors