vyos.vyos.vyos_ospf_interfaces module – OSPF Interfaces Resource Module.

Note

This module is part of the vyos.vyos collection (version 5.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_ospf_interfaces.

New in vyos.vyos 1.2.0

Synopsis

• This module manages OSPF configuration of interfaces on devices running VYOS.

Aliases: ospf_interfaces

Parameters

Parameter	Comments
config list / elements=dictionary	A list of OSPF configuration for interfaces.
address_family list / elements=dictionary	OSPF settings on the interfaces in address-family context.
afi string / required	Address Family Identifier (AFI) for OSPF settings on the interfaces. Choices: "ipv4" "ipv6"
authentication dictionary	Authentication settings on the interface.
md5_key dictionary	md5 parameters.
key string	md5 key.
key_id integer	key id.
plaintext_password string	Plain Text password.
bandwidth integer	Bandwidth of interface (kilobits/sec)
cost integer	metric associated with interface.
dead_interval integer	Time interval to detect a dead router.
hello_interval integer	Timer interval between transmission of hello packets.
ifmtu integer	interface MTU.
instance string	Instance ID.
mtu_ignore boolean	if True, Disable MTU check for Database Description packets. Choices: false true
network string	Interface type.
passive boolean	If True, disables forming adjacency. Choices: false true
priority integer	Interface priority.
retransmit_interval integer	LSA retransmission interval.
transmit_delay integer	LSA transmission delay.
name string	Name/Identifier of the interface.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the VYOS device by executing the command show configuration commands | match “set interfaces”. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: "merged" ← (default) "replaced" "overridden" "deleted" "gathered" "parsed" "rendered"

Examples

# Using merged
#
# Before state:
# -------------
#

# @vyos:~$ show configuration commands | match "ospf"

- name: Merge provided configuration with device configuration
  vyos.vyos.vyos_ospf_interfaces:
    config:
      - name: "eth1"
        address_family:
          - afi: "ipv4"
            transmit_delay: 50
            priority: 26
            network: "point-to-point"
          - afi: "ipv6"
            dead_interval: 39
      - name: "bond2"
        address_family:
          - afi: "ipv4"
            transmit_delay: 45
            bandwidth: 70
            authentication:
              md5_key:
                key_id: 10
                key: "1111111111232345"
          - afi: "ipv6"
            passive: true
    state: merged

# After State:
# --------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'

# "after": [
#        "
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "authentication": {
#                        "md5_key": {
#                            "key": "1111111111232345",
#                            "key_id": 10
#                        }
#                    },
#                    "bandwidth": 70,
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "network": "point-to-point",
#                    "priority": 26,
#                    "transmit_delay": 50
#                },
#                {
#                    "afi": "ipv6",
#                    "dead_interval": 39
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "before": [
#        {
#            "name": "eth0"
#        },
#        {
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "changed": true,
#    "commands": [
#        "set interfaces ethernet eth1 ip ospf transmit-delay 50",
#        "set interfaces ethernet eth1 ip ospf priority 26",
#        "set interfaces ethernet eth1 ip ospf network point-to-point",
#        "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
#        "set interfaces bonding bond2 ip ospf transmit-delay 45",
#        "set interfaces bonding bond2 ip ospf bandwidth 70",
#        "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345",
#        "set interfaces bonding bond2 ipv6 ospfv3 passive"
#    ],

# Using replaced:

# Before State:
# ------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'

- name: Replace provided configuration with device configuration
  vyos.vyos.vyos_ospf_interfaces:
    config:
      - name: "eth1"
        address_family:
          - afi: "ipv4"
            cost: 100
          - afi: "ipv6"
            ifmtu: 33
      - name: "bond2"
        address_family:
          - afi: "ipv4"
            transmit_delay: 45
          - afi: "ipv6"
            passive: true
    state: replaced

# After State:
# -----------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf cost '100'
# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33'
# vyos@vyos:~$

# Module Execution
# ----------------
#    "after": [
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "cost": 100
#                },
#                {
#                    "afi": "ipv6",
#                    "ifmtu": 33
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "before": [
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "authentication": {
#                        "md5_key": {
#                            "key": "1111111111232345",
#                            "key_id": 10
#                        }
#                    },
#                    "bandwidth": 70,
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "network": "point-to-point",
#                    "priority": 26,
#                    "transmit_delay": 50
#                },
#                {
#                    "afi": "ipv6",
#                    "dead_interval": 39
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "changed": true,
#    "commands": [
#        "set interfaces ethernet eth1 ip ospf cost 100",
#        "set interfaces ethernet eth1 ipv6 ospfv3 ifmtu 33",
#        "delete interfaces ethernet eth1 ip ospf network point-to-point",
#        "delete interfaces ethernet eth1 ip ospf priority 26",
#        "delete interfaces ethernet eth1 ip ospf transmit-delay 50",
#        "delete interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
#        "delete interfaces bonding bond2 ip ospf authentication",
#        "delete interfaces bonding bond2 ip ospf bandwidth 70"
#    ],
#

# Using Overridden:
# -----------------

# Before State:
# ------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf cost '100'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33'
# vyos@vyos:~$

- name: Override device configuration with provided configuration
  vyos.vyos.vyos_ospf_interfaces:
    config:
      - name: "eth0"
        address_family:
          - afi: "ipv4"
            cost: 100
          - afi: "ipv6"
            ifmtu: 33
            passive: true
    state: overridden

# After State:
# -----------

# 200~vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces ethernet eth0 ip ospf cost '100'
# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'passive'
# vyos@vyos:~$
#
#
#     "after": [
#         {
#             "name": "bond2"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 100
#                 },
#                 {
#                     "afi": "ipv6",
#                     "ifmtu": 33,
#                     "passive": true
#                 }
#             ],
#             "name": "eth0"
#         },
#         {
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 100,
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39,
#                     "ifmtu": 33
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete interfaces bonding bond2 ip ospf",
#         "delete interfaces bonding bond2 ipv6 ospfv3",
#         "delete interfaces ethernet eth1 ip ospf",
#         "delete interfaces ethernet eth1 ipv6 ospfv3",
#         "set interfaces ethernet eth0 ip ospf cost 100",
#         "set interfaces ethernet eth0 ipv6 ospfv3 ifmtu 33",
#         "set interfaces ethernet eth0 ipv6 ospfv3 passive"
#     ],
#

# Using deleted:
# -------------

# before state:
# -------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth0 ip ospf cost '100'
# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$

- name: Delete device configuration
  vyos.vyos.vyos_ospf_interfaces:
    config:
      - name: "eth0"
    state: deleted

# After State:
# -----------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$
#
#
# "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 100
#                 },
#                 {
#                     "afi": "ipv6",
#                     "ifmtu": 33,
#                     "passive": true
#                 }
#             ],
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete interfaces ethernet eth0 ip ospf",
#         "delete interfaces ethernet eth0 ipv6 ospfv3"
#     ],
#
# Using parsed:
# parsed.cfg:

# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth0 ip ospf cost '50'
# set interfaces ethernet eth0 ip ospf priority '26'
# set interfaces ethernet eth0 ipv6 ospfv3 instance-id '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'mtu-ignore'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
#

- name: parse configs
  vyos.vyos.vyos_ospf_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Module Execution:
# ----------------

#  "parsed": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 50,
#                     "priority": 26
#                 },
#                 {
#                     "afi": "ipv6",
#                     "instance": "33",
#                     "mtu_ignore": true
#                 }
#             ],
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39
#                 }
#             ],
#             "name": "eth1"
#         }
#     ]

# Using rendered:
# --------------

- name: Render
  vyos.vyos.vyos_ospf_interfaces:
    config:
      - name: "eth1"
        address_family:
          - afi: "ipv4"
            transmit_delay: 50
            priority: 26
            network: "point-to-point"
          - afi: "ipv6"
            dead_interval: 39
      - name: "bond2"
        address_family:
          - afi: "ipv4"
            transmit_delay: 45
            bandwidth: 70
            authentication:
              md5_key:
                key_id: 10
                key: "1111111111232345"
          - afi: "ipv6"
            passive: true
    state: rendered

# Module Execution:
# ----------------

#    "rendered": [
#        "set interfaces ethernet eth1 ip ospf transmit-delay 50",
#        "set interfaces ethernet eth1 ip ospf priority 26",
#        "set interfaces ethernet eth1 ip ospf network point-to-point",
#        "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
#        "set interfaces bonding bond2 ip ospf transmit-delay 45",
#        "set interfaces bonding bond2 ip ospf bandwidth 70",
#        "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345",
#        "set interfaces bonding bond2 ipv6 ospfv3 passive"
#    ]
#

# Using Gathered:
# --------------

# Native Config:

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$

- name: gather configs
  vyos.vyos.vyos_ospf_interfaces:
    state: gathered

# Module Execution:
# -----------------

#    "gathered": [
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "authentication": {
#                        "md5_key": {
#                            "key": "1111111111232345",
#                            "key_id": 10
#                        }
#                    },
#                    "bandwidth": 70,
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "network": "point-to-point",
#                    "priority": 26,
#                    "transmit_delay": 50
#                },
#                {
#                    "afi": "ipv6",
#                    "dead_interval": 39
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)

Collection links

• Issue Tracker
• Repository (Sources)