Documentation

Configuration

Common Options

ACCELERATE_CONNECT_TIMEOUT

Description:This setting controls the timeout for the socket connect call, and should be kept relatively low. The connection to the accelerate_port will be attempted 3 times before Ansible will fall back to ssh or paramiko (depending on your default connection setting) to try and start the accelerate daemon remotely. Note, this value can be set to less than one second, however it is probably not a good idea to do so unless you are on a very fast and reliable LAN. If you are connecting to systems over the internet, it may be necessary to increase this timeout.
Type:float
Default:1.0
Version Added:1.4
Ini Section:accelerate
Ini Key:accelerate_connect_timeout
Environment:ACCELERATE_CONNECT_TIMEOUT
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_DAEMON_TIMEOUT

Description:This setting controls the timeout for the accelerated daemon, as measured in minutes. The default daemon timeout is 30 minutes. Prior to 1.6, the timeout was hard-coded from the time of the daemon’s launch. For version 1.6+, the timeout is now based on the last activity to the daemon and is configurable via this option.
Type:integer
Default:30
Version Added:1.6
Ini Section:accelerate
Ini Key:accelerate_daemon_timeout
Environment:ACCELERATE_DAEMON_TIMEOUT
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_KEYS_DIR

Default:~/.fireball.keys
Ini Section:accelerate
Ini Key:accelerate_keys_dir
Environment:ACCELERATE_KEYS_DIR
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_KEYS_DIR_PERMS

Default:700
Ini Section:accelerate
Ini Key:accelerate_keys_dir_perms
Environment:ACCELERATE_KEYS_DIR_PERMS
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_KEYS_FILE_PERMS

Default:600
Ini Section:accelerate
Ini Key:accelerate_keys_file_perms
Environment:ACCELERATE_KEYS_FILE_PERMS
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_MULTI_KEY

Type:boolean
Default:False
Ini Section:accelerate
Ini Key:accelerate_multi_key
Environment:ACCELERATE_MULTI_KEY
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_PORT

Type:integer
Default:5099
Ini Section:accelerate
Ini Key:accelerate_port
Environment:ACCELERATE_PORT
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ACCELERATE_TIMEOUT

Type:integer
Default:30
Ini Section:accelerate
Ini Key:accelerate_timeout
Environment:ACCELERATE_TIMEOUT
Deprecated in:2.5
Deprecated detail:
 Removing accelerate as a connection method, settings not needed either.
Deprecated alternatives:
 ssh and paramiko

ALLOW_WORLD_READABLE_TMPFILES

Description:This makes the temporary files created on the machine to be world readable and will issue a warning instead of failing the task. It is useful when becoming an unprivileged user.
Type:boolean
Default:False
Version Added:2.1
Ini Section:defaults
Ini Key:allow_world_readable_tmpfiles

ANSIBLE_COW_SELECTION

Description:This allows you to chose a specific cowsay stencil for the banners or use ‘random’ to cycle through them.
Default:default
Ini Section:defaults
Ini Key:cow_selection
Environment:ANSIBLE_COW_SELECTION

ANSIBLE_COW_WHITELIST

Description:White list of cowsay templates that are ‘safe’ to use, set to empty list if you want to enable all installed templates.
Type:list
Default:[‘bud-frogs’, ‘bunny’, ‘cheese’, ‘daemon’, ‘default’, ‘dragon’, ‘elephant-in-snake’, ‘elephant’, ‘eyes’, ‘hellokitty’, ‘kitty’, ‘luke-koala’, ‘meow’, ‘milk’, ‘moofasa’, ‘moose’, ‘ren’, ‘sheep’, ‘small’, ‘stegosaurus’, ‘stimpy’, ‘supermilker’, ‘three-eyes’, ‘turkey’, ‘turtle’, ‘tux’, ‘udder’, ‘vader-koala’, ‘vader’, ‘www’]
Ini Section:defaults
Ini Key:cow_whitelist
Environment:ANSIBLE_COW_WHITELIST

ANSIBLE_FORCE_COLOR

Description:This options forces color mode even when running without a TTY or the “nocolor” setting is True.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:force_color
Environment:ANSIBLE_FORCE_COLOR

ANSIBLE_NOCOLOR

Description:This setting allows suppressing colorizing output, which is used to give a better indication of failure and status information.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:nocolor
Environment:ANSIBLE_NOCOLOR

ANSIBLE_NOCOWS

Description:If you have cowsay installed but want to avoid the ‘cows’ (why????), use this.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:nocows
Environment:ANSIBLE_NOCOWS

ANSIBLE_PIPELINING

Description:Pipelining, if supported by the connection plugin, reduces the number of network operations required to execute a module on the remote server, by executing many Ansible modules without actual file transfer. This can result in a very significant performance improvement when enabled. However this conflicts with privilege escalation (become). For example, when using ‘sudo:’ operations you must first disable ‘requiretty’ in /etc/sudoers on all managed hosts, which is why it is disabled by default.
Type:boolean
Default:False
Ini Section:connection
Ini Key:pipelining
Environment:ANSIBLE_PIPELINING

ANSIBLE_SSH_ARGS

Description:If set, this will override the Ansible default ssh arguments. In particular, users may wish to raise the ControlPersist time to encourage performance. A value of 30 minutes may be appropriate. Be aware that if -o ControlPath is set in ssh_args, the control path setting is not used.
Default:-C -o ControlMaster=auto -o ControlPersist=60s
Ini Section:ssh_connection
Ini Key:ssh_args
Environment:ANSIBLE_SSH_ARGS

ANSIBLE_SSH_CONTROL_PATH

Description:This is the location to save ssh’s ControlPath sockets, it uses ssh’s variable substitution. Since 2.3, if null, ansible will generate a unique hash. Use %(directory)s to indicate where to use the control dir path setting. Before 2.3 it defaulted to control_path=%(directory)s/ansible-ssh-%%h-%%p-%%r. Be aware that this setting is ignored if -o ControlPath is set in ssh args.
Default:None
Ini Section:ssh_connection
Ini Key:control_path
Environment:ANSIBLE_SSH_CONTROL_PATH

ANSIBLE_SSH_CONTROL_PATH_DIR

Description:This sets the directory to use for ssh control path if the control path setting is null. Also, provides the %(directory)s variable for the control path setting.
Default:~/.ansible/cp
Ini Section:ssh_connection
Ini Key:control_path_dir
Environment:ANSIBLE_SSH_CONTROL_PATH_DIR

ANSIBLE_SSH_EXECUTABLE

Description:This defines the location of the ssh binary. It defaults to ssh which will use the first ssh binary available in $PATH. This option is usually not required, it might be useful when access to system ssh is restricted, or when using ssh wrappers to connect to remote hosts.
Default:ssh
Version Added:2.2
Ini Section:ssh_connection
Ini Key:ssh_executable
Environment:ANSIBLE_SSH_EXECUTABLE

ANSIBLE_SSH_PIPELINING

Description:Pipelining reduces the number of SSH operations required to execute a module on the remote server, by executing many Ansible modules without actual file transfer. This can result in a very significant performance improvement when enabled. However this conflicts with privilege escalation (become). For example, when using ‘sudo:’ operations you must first disable ‘requiretty’ in /etc/sudoers on all managed hosts, which is why it is disabled by default.
Type:boolean
Default:False
Ini Section:ssh_connection
Ini Key:pipelining
Environment:ANSIBLE_SSH_PIPELINING

ANSIBLE_SSH_RETRIES

Description:Number of attempts to establish a connection before we give up and report the host as ‘UNREACHABLE’
Type:integer
Default:0
Ini Section:ssh_connection
Ini Key:retries
Environment:ANSIBLE_SSH_RETRIES

ANY_ERRORS_FATAL

Description:Sets the default value for the any_errors_fatal keyword, if True, Task failures will be considered fatal errors.
Type:boolean
Default:False
Version Added:2.4
Ini Section:defaults
Ini Key:any_errors_fatal
Environment:ANSIBLE_ANY_ERRORS_FATAL

BECOME_ALLOW_SAME_USER

Description:This setting controls if become is skipped when remote user and become user are the same. I.E root sudo to root.
Type:boolean
Default:False
Ini Section:privilege_escalation
Ini Key:become_allow_same_user
Environment:ANSIBLE_BECOME_ALLOW_SAME_USER

CACHE_PLUGIN

Description:Chooses which cache plugin to use, the default ‘memory’ is ephimeral.
Default:memory
Ini Section:defaults
Ini Key:fact_caching
Environment:ANSIBLE_CACHE_PLUGIN

CACHE_PLUGIN_CONNECTION

Description:Defines connection or path information for the cache plugin
Default:None
Ini Section:defaults
Ini Key:fact_caching_connection
Environment:ANSIBLE_CACHE_PLUGIN_CONNECTION

CACHE_PLUGIN_PREFIX

Description:Prefix to use for cache plugin files/tables
Default:ansible_facts
Ini Section:defaults
Ini Key:fact_caching_prefix
Environment:ANSIBLE_CACHE_PLUGIN_PREFIX

CACHE_PLUGIN_TIMEOUT

Description:Expiration timeout for the cache plugin data
Type:integer
Default:86400
Ini Section:defaults
Ini Key:fact_caching_timeout
Environment:ANSIBLE_CACHE_PLUGIN_TIMEOUT

COLOR_CHANGED

Description:Defines the color to use on ‘Changed’ task status
Default:yellow
Ini Section:colors
Ini Key:changed
Environment:ANSIBLE_COLOR_CHANGED

COLOR_DEBUG

Description:Defines the color to use when emitting debug messages
Default:dark gray
Ini Section:colors
Ini Key:debug
Environment:ANSIBLE_COLOR_DEBUG

COLOR_DEPRECATE

Description:Defines the color to use when emitting deprecation messages
Default:purple
Ini Section:colors
Ini Key:deprecate
Environment:ANSIBLE_COLOR_DEPRECATE

COLOR_DIFF_ADD

Description:Defines the color to use when showing added lines in diffs
Default:green
Ini Section:colors
Ini Key:diff_add
Environment:ANSIBLE_COLOR_DIFF_ADD

COLOR_DIFF_LINES

Description:Defines the color to use when showing diffs
Default:cyan
Ini Section:colors
Ini Key:diff_lines
Environment:ANSIBLE_COLOR_DIFF_LINES

COLOR_DIFF_REMOVE

Description:Defines the color to use when showing removed lines in diffs
Default:red
Ini Section:colors
Ini Key:diff_remove
Environment:ANSIBLE_COLOR_DIFF_REMOVE

COLOR_ERROR

Description:Defines the color to use when emitting error messages
Default:red
Ini Section:colors
Ini Key:error
Environment:ANSIBLE_COLOR_ERROR

COLOR_HIGHLIGHT

Description:Color used for highlights
Default:white
Ini Section:colors
Ini Key:highlight
Environment:ANSIBLE_COLOR_HIGHLIGHT

COLOR_OK

Description:Defines the color to use when showing ‘OK’ task status
Default:green
Ini Section:colors
Ini Key:ok
Environment:ANSIBLE_COLOR_OK

COLOR_SKIP

Description:Defines the color to use when showing ‘Skipped’ task status
Default:cyan
Ini Section:colors
Ini Key:skip
Environment:ANSIBLE_COLOR_SKIP

COLOR_UNREACHABLE

Description:Defines the color to use on ‘Unreachable’ status
Default:bright red
Ini Section:colors
Ini Key:unreachable
Environment:ANSIBLE_COLOR_UNREACHABLE

COLOR_VERBOSE

Description:Defines the color to use when emitting verbose messages. i.e those that show with ‘-v’s.
Default:blue
Ini Section:colors
Ini Key:verbose
Environment:ANSIBLE_COLOR_VERBOSE

COLOR_WARN

Description:Defines the color to use when emitting warning messages
Default:bright purple
Ini Section:colors
Ini Key:warn
Environment:ANSIBLE_COLOR_WARN

COMMAND_WARNINGS

Description:By default Ansible will issue a warning when the shell or command module is used and the command appears to be similar to an existing Ansible module. These warnings can be silenced by adjusting this setting to False. You can also control this at the task level with the module optoin warn.
Type:boolean
Default:True
Version Added:1.8
Ini Section:defaults
Ini Key:command_warnings
Environment:ANSIBLE_COMMAND_WARNINGS

DEFAULT_ACTION_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Action Plugins.
Type:pathspec
Default:~/.ansible/plugins/action:/usr/share/ansible/plugins/action
Ini Section:defaults
Ini Key:action_plugins
Environment:ANSIBLE_ACTION_PLUGINS

DEFAULT_ALLOW_UNSAFE_LOOKUPS

Description:When enabled, this option allows lookup plugins (whether used in variables as {{lookup('foo')}} or as a loop as with_foo) to return data that is not marked ‘unsafe’. By default, such data is marked as unsafe to prevent the templating engine from evaluating any jinja2 templating language, as this could represent a security risk. This option is provided to allow for backwards-compatibility, however users should first consider adding allow_unsafe=True to any lookups which may be expected to contain data which may be run through the templating engine late
Type:boolean
Default:False
Version Added:2.2.3
Ini Section:defaults
Ini Key:allow_unsafe_lookups

DEFAULT_ASK_PASS

Description:This controls whether an Ansible playbook should prompt for a login password. If using SSH keys for authentication, you probably do not needed to change this setting.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:ask_pass
Environment:ANSIBLE_ASK_PASS

DEFAULT_ASK_SU_PASS

Description:This controls whether an Ansible playbook should prompt for a su password.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:ask_su_pass
Environment:ANSIBLE_ASK_SU_PASS
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_ASK_SUDO_PASS

Description:This controls whether an Ansible playbook should prompt for a sudo password.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:ask_sudo_pass
Environment:ANSIBLE_ASK_SUDO_PASS
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_ASK_VAULT_PASS

Description:This controls whether an Ansible playbook should prompt for a vault password.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:ask_vault_pass
Environment:ANSIBLE_ASK_VAULT_PASS

DEFAULT_BECOME

Description:Toggles the use of privilege escalation, allowing you to ‘become’ another user after login.
Type:boolean
Default:False
Ini Section:privilege_escalation
Ini Key:become
Environment:ANSIBLE_BECOME

DEFAULT_BECOME_ASK_PASS

Description:Toggle to prompt for privilege escalation password.
Type:boolean
Default:False
Ini Section:privilege_escalation
Ini Key:become_ask_pass
Environment:ANSIBLE_BECOME_ASK_PASS

DEFAULT_BECOME_EXE

Description:executable to use for privilege escalation, otherwise Ansible will depend on PATH
Default:None
Ini Section:privilege_escalation
Ini Key:become_exe
Environment:ANSIBLE_BECOME_EXE

DEFAULT_BECOME_FLAGS

Description:Flags to pass to the privilege escalation executable.
Default:None
Ini Section:privilege_escalation
Ini Key:become_flags
Environment:ANSIBLE_BECOME_FLAGS

DEFAULT_BECOME_METHOD

Description:Privilege escalation method to use when become is enabled.
Default:sudo
Ini Section:privilege_escalation
Ini Key:become_method
Environment:ANSIBLE_BECOME_METHOD

DEFAULT_BECOME_USER

Description:The user your login/remote user ‘becomes’ when using privilege escalation, most systems will use ‘root’ when no user is specified.
Default:root
Ini Section:privilege_escalation
Ini Key:become_user
Environment:ANSIBLE_BECOME_USER

DEFAULT_CACHE_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Cache Plugins.
Type:pathspec
Default:~/.ansible/plugins/cache:/usr/share/ansible/plugins/cache
Ini Section:defaults
Ini Key:cache_plugins
Environment:ANSIBLE_CACHE_PLUGINS

DEFAULT_CALLABLE_WHITELIST

Description:Whitelist of callable methods to be made available to template evaluation
Type:list
Default:[]
Ini Section:defaults
Ini Key:callable_whitelist
Environment:ANSIBLE_CALLABLE_WHITELIST

DEFAULT_CALLBACK_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Callback Plugins.
Type:pathspec
Default:~/.ansible/plugins/callback:/usr/share/ansible/plugins/callback
Ini Section:defaults
Ini Key:callback_plugins
Environment:ANSIBLE_CALLBACK_PLUGINS

DEFAULT_CALLBACK_WHITELIST

Description:List of whitelisted callbacks, not all callbacks need whitelisting, but many of those shipped with Ansible do as we don’t want them activated by default.
Type:list
Default:[]
Ini Section:defaults
Ini Key:callback_whitelist
Environment:ANSIBLE_CALLBACK_WHITELIST

DEFAULT_CONNECTION_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Connection Plugins.
Type:pathspec
Default:~/.ansible/plugins/connection:/usr/share/ansible/plugins/connection
Ini Section:defaults
Ini Key:connection_plugins
Environment:ANSIBLE_CONNECTION_PLUGINS

DEFAULT_DEBUG

Description:Toggles debug output in Ansible, VERY verbose and can hinder multiprocessing.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:debug
Environment:ANSIBLE_DEBUG

DEFAULT_EXECUTABLE

Description:This indicates the command to use to spawn a shell under for Ansible’s execution needs on a target. Users may need to change this in rare instances when shell usage is constrained, but in most cases it may be left as is.
Default:/bin/sh
Ini Section:defaults
Ini Key:executable
Environment:ANSIBLE_EXECUTABLE

DEFAULT_FACT_PATH

Description:This option allows you to globally configure a custom path for ‘local_facts’ for the implied M(setup) task when using fact gathering. If not set, it will fallback to the default from the M(setup) module: /etc/ansible/facts.d. This does not affect user defined tasks that use the M(setup) module.
Type:path
Default:None
Ini Section:defaults
Ini Key:fact_path
Environment:ANSIBLE_FACT_PATH

DEFAULT_FILTER_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Jinja2 Filter Plugins.
Type:pathspec
Default:~/.ansible/plugins/filter:/usr/share/ansible/plugins/filter
Ini Section:defaults
Ini Key:filter_plugins
Environment:ANSIBLE_FILTER_PLUGINS

DEFAULT_FORCE_HANDLERS

Description:This option controls if notified handlers run on a host even if a failure occurs on that host. When false, the handlers will not run if a failure has occurred on a host. This can also be set per play or on the command line. See Handlers and Failure for more details.
Type:boolean
Default:False
Version Added:1.9.1
Ini Section:defaults
Ini Key:force_handlers
Environment:ANSIBLE_FORCE_HANDLERS

DEFAULT_FORKS

Description:Maximum number of forks Ansible will use to execute tasks on target hosts.
Type:integer
Default:5
Ini Section:defaults
Ini Key:forks
Environment:ANSIBLE_FORKS

DEFAULT_GATHER_SUBSET

Description:Set the gather_subset option for the M(setup) task in the implicit fact gathering. See the module documentation for specifics. It does not apply to user defined M(setup) tasks.
Default:all
Version Added:2.1
Ini Section:defaults
Ini Key:gather_subset
Environment:ANSIBLE_GATHER_SUBSET

DEFAULT_GATHER_TIMEOUT

Description:Set the timeout in seconds for the implicit fact gathering. It does not apply to user defined M(setup) tasks.
Type:integer
Default:10
Ini Section:defaults
Ini Key:gather_timeout
Environment:ANSIBLE_GATHER_TIMEOUT

DEFAULT_GATHERING

Description:This setting controls the default policy of fact gathering (facts discovered about remote systems). When ‘implicit’ (the default), the cache plugin will be ignored and facts will be gathered per play unless ‘gather_facts: False’ is set. When ‘explicit’ the inverse is true, facts will not be gathered unless directly requested in the play. The ‘smart’ value means each new host that has no facts discovered will be scanned, but if the same host is addressed in multiple plays it will not be contacted again in the playbook run. This option can be useful for those wishing to save fact gathering time. Both ‘smart’ and ‘explicit’ will use the cache plugin.
Default:implicit
Version Added:1.6
Ini Section:defaults
Ini Key:gathering
Environment:ANSIBLE_GATHERING

DEFAULT_HANDLER_INCLUDES_STATIC

Description:Since 2.0 M(include) can be ‘dynamic’, this setting (if True) forces that if the include appears in a handlers section to be ‘static’.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:handler_includes_static
Environment:ANSIBLE_HANDLER_INCLUDES_STATIC
Deprecated in:2.8
Deprecated detail:
 include itself is deprecated and this setting will not matter in the future
Deprecated alternatives:
 none as its already built into the decision between include_tasks and import_tasks

DEFAULT_HASH_BEHAVIOUR

Description:This setting controls how variables merge in Ansible. By default Ansible will override variables in specific precedence orders, as described in Variables. When a variable of higher precedence wins, it will replace the other value. Some users prefer that variables that are hashes (aka ‘dictionaries’ in Python terms) are merged. This setting is called ‘merge’. This is not the default behavior and it does not affect variables whose values are scalars (integers, strings) or arrays. We generally recommend not using this setting unless you think you have an absolute need for it, and playbooks in the official examples repos do not use this setting In version 2.0 a combine filter was added to allow doing this for a particular variable (described in Filters).
Type:string
Default:replace
Ini Section:defaults
Ini Key:hash_behaviour
Environment:ANSIBLE_HASH_BEHAVIOUR

DEFAULT_HOST_LIST

Description:Colon separated list of Ansible inventory sources
Type:pathlist
Default:/etc/ansible/hosts
Ini Section:defaults
Ini Key:inventory
Ini Section:defaults
Ini Key:hostfile
Environment:ANSIBLE_INVENTORY
Environment:ANSIBLE_HOSTS

DEFAULT_INTERNAL_POLL_INTERVAL

Description:This sets the interval (in seconds) of Ansible internal processes polling each other. Lower values improve performance with large playbooks at the expense of extra CPU load. Higher values are more suitable for Ansible usage in automation scenarios, when UI responsiveness is not required but CPU usage might be a concern. The default corresponds to the value hardcoded in Ansible <= 2.1
Type:float
Default:0.001
Version Added:2.2
Ini Section:defaults
Ini Key:internal_poll_interval

DEFAULT_INVENTORY_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Inventory Plugins.
Type:pathspec
Default:~/.ansible/plugins/inventory:/usr/share/ansible/plugins/inventory
Ini Section:defaults
Ini Key:inventory_plugins
Environment:ANSIBLE_INVENTORY_PLUGINS

DEFAULT_JINJA2_EXTENSIONS

Description:This is a developer-specific feature that allows enabling additional Jinja2 extensions. See the Jinja2 documentation for details. If you do not know what these do, you probably don’t need to change this setting :)
Default:[]
Ini Section:defaults
Ini Key:jinja2_extensions
Environment:ANSIBLE_JINJA2_EXTENSIONS

DEFAULT_KEEP_REMOTE_FILES

Description:Enables/disables the cleaning up of the temporary files Ansible used to execute the tasks on the remote.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:keep_remote_files
Environment:ANSIBLE_KEEP_REMOTE_FILES

DEFAULT_LIBVIRT_LXC_NOSECLABEL

Description:This setting causes libvirt to connect to lxc containers by passing –noseclabel to virsh. This is necessary when running on systems which do not have SELinux.
Type:boolean
Default:False
Version Added:2.1
Ini Section:selinux
Ini Key:libvirt_lxc_noseclabel
Environment:LIBVIRT_LXC_NOSECLABEL

DEFAULT_LOAD_CALLBACK_PLUGINS

Description:Controls whether callback plugins are loaded when running /usr/bin/ansible. This may be used to log activity from the command line, send notifications, and so on. Callback plugins are always loaded for ansible-playbook.
Type:boolean
Default:False
Version Added:1.8
Ini Section:defaults
Ini Key:bin_ansible_callbacks
Environment:ANSIBLE_LOAD_CALLBACK_PLUGINS

DEFAULT_LOCAL_TMP

Description:Temporary directory for Ansible to use on the controller.
Type:tmppath
Default:~/.ansible/tmp
Ini Section:defaults
Ini Key:local_tmp
Environment:ANSIBLE_LOCAL_TEMP

DEFAULT_LOG_PATH

Description:File to which Ansible will log on the controller. When empty logging is disabled.
Type:path
Default:
Ini Section:defaults
Ini Key:log_path
Environment:ANSIBLE_LOG_PATH

DEFAULT_LOOKUP_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Lookup Plugins.
Type:pathspec
Default:~/.ansible/plugins/lookup:/usr/share/ansible/plugins/lookup
Ini Section:defaults
Ini Key:lookup_plugins
Environment:ANSIBLE_LOOKUP_PLUGINS

DEFAULT_MANAGED_STR

Description:Sets the macro for the ‘ansible_managed’ variable available for M(template) tasks.
Default:Ansible managed
Ini Section:defaults
Ini Key:ansible_managed

DEFAULT_MODULE_ARGS

Description:This sets the default arguments to pass to the ansible adhoc binary if no -a is specified.
Default:
Ini Section:defaults
Ini Key:module_args
Environment:ANSIBLE_MODULE_ARGS

DEFAULT_MODULE_COMPRESSION

Description:Compression scheme to use when transfering Python modules to the target.
Default:ZIP_DEFLATED
Ini Section:defaults
Ini Key:module_compression

DEFAULT_MODULE_LANG

Description:Language locale setting to use for modules when they execute on the target, if empty it defaults to ‘en_US.UTF-8’
Default:eval(os.getenv(‘LANG’, ‘en_US.UTF-8’))
Ini Section:defaults
Ini Key:module_lang
Environment:ANSIBLE_MODULE_LANG

DEFAULT_MODULE_NAME

Description:Module to use with the ansible AdHoc command, if none is specified via -m.
Default:command
Ini Section:defaults
Ini Key:module_name

DEFAULT_MODULE_PATH

Description:Colon separated paths in which Ansible will search for Modules.
Type:pathspec
Default:~/.ansible/plugins/modules:/usr/share/ansible/plugins/modules
Ini Section:defaults
Ini Key:library
Environment:ANSIBLE_LIBRARY

DEFAULT_MODULE_SET_LOCALE

Description:Controls if we set locale for modules when executing on the target.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:module_set_locale
Environment:ANSIBLE_MODULE_SET_LOCALE

DEFAULT_MODULE_UTILS_PATH

Description:Colon separated paths in which Ansible will search for Module utils files, which are shared by modules.
Type:pathspec
Default:~/.ansible/plugins/module_utils:/usr/share/ansible/plugins/module_utils
Ini Section:defaults
Ini Key:module_utils
Environment:ANSIBLE_MODULE_UTILS

DEFAULT_NO_LOG

Description:Toggle Ansible’s display and logging of task details, mainly used to avoid security disclosures.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:no_log
Environment:ANSIBLE_NO_LOG

DEFAULT_NO_TARGET_SYSLOG

Description:Toggle Ansbile logging to syslog on the target when it executes tasks.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:no_target_syslog
Environment:ANSIBLE_NO_TARGET_SYSLOG

DEFAULT_NULL_REPRESENTATION

Description:What templating should return as a ‘null’ value. When not set it will let Jinja2 decide.
Type:none
Default:None
Ini Section:defaults
Ini Key:null_representation
Environment:ANSIBLE_NULL_REPRESENTATION

DEFAULT_POLL_INTERVAL

Description:For asynchronous tasks in Ansible (covered in Asynchronous Actions and Polling), this is how often to check back on the status of those tasks when an explicit poll interval is not supplied. The default is a reasonably moderate 15 seconds which is a tradeoff between checking in frequently and providing a quick turnaround when something may have completed.
Type:integer
Default:15
Ini Section:defaults
Ini Key:poll_interval
Environment:ANSIBLE_POLL_INTERVAL

DEFAULT_PRIVATE_KEY_FILE

Description:Option for connections using a certificate or key file to authenticate, rather than an agent or passwords, you can set the default value here to avoid re-specifying –private-key with every invocation.
Type:path
Default:None
Ini Section:defaults
Ini Key:private_key_file
Environment:ANSIBLE_PRIVATE_KEY_FILE

DEFAULT_PRIVATE_ROLE_VARS

Type:boolean
Default:False
Ini Section:defaults
Ini Key:private_role_vars
Environment:ANSIBLE_PRIVATE_ROLE_VARS

DEFAULT_REMOTE_PORT

Description:Port to use in remote connections, when blank it will use the connection plugin default.
Type:integer
Default:None
Ini Section:defaults
Ini Key:remote_port
Environment:ANSIBLE_REMOTE_PORT

DEFAULT_REMOTE_TMP

Description:Temporary directory to use on targets when executing tasks. In some cases Ansible may still choose to use a system temporary dir to avoid permission issues.
Default:~/.ansible/tmp
Ini Section:defaults
Ini Key:remote_tmp
Environment:ANSIBLE_REMOTE_TEMP

DEFAULT_REMOTE_USER

Description:Sets the login user for the target machines When blank it uses the connection plugin’s default, normally the user currently executing Ansible.
Default:None
Ini Section:defaults
Ini Key:remote_user
Environment:ANSIBLE_REMOTE_USER

DEFAULT_ROLES_PATH

Description:Colon separated paths in which Ansible will search for Roles.
Type:pathspec
Default:~/.ansible/roles:/usr/share/ansible/roles:/etc/ansible/roles
Ini Section:defaults
Ini Key:roles_path
Environment:ANSIBLE_ROLES_PATH

DEFAULT_SCP_IF_SSH

Description:Prefered method to use when transfering files over ssh When set to smart, Ansible will try them until one succeeds or they all fail If set to True, it will force ‘scp’, if False it will use ‘sftp’
Default:smart
Ini Section:ssh_connection
Ini Key:scp_if_ssh
Environment:ANSIBLE_SCP_IF_SSH

DEFAULT_SELINUX_SPECIAL_FS

Description:Some filesystems do not support safe operations and/or return inconsistent errors, this setting makes Ansible ‘tolerate’ those in the list w/o causing fatal errors. Data corruption may occur and writes are not always verified when a filesystem is in the list.
Type:list
Default:fuse, nfs, vboxsf, ramfs, 9p
Ini Section:selinux
Ini Key:special_context_filesystems

DEFAULT_SFTP_BATCH_MODE

Type:boolean
Default:True
Ini Section:ssh_connection
Ini Key:sftp_batch_mode
Environment:ANSIBLE_SFTP_BATCH_MODE

DEFAULT_SQUASH_ACTIONS

Description:Ansible can optimise actions that call modules that support list parameters when using with_ looping. Instead of calling the module once for each item, the module is called once with the full list. The default value for this setting is only for certain package managers, but it can be used for any module Currently, this is only supported for modules that have a name or pkg parameter, and only when the item is the only thing being passed to the parameter.
Type:list
Default:apk, apt, dnf, homebrew, openbsd_pkg, pacman, pkgng, yum, zypper
Version Added:2.0
Ini Section:defaults
Ini Key:squash_actions
Environment:ANSIBLE_SQUASH_ACTIONS

DEFAULT_SSH_TRANSFER_METHOD

Description:unused?
Default:None
Ini Section:ssh_connection
Ini Key:transfer_method
Environment:ANSIBLE_SSH_TRANSFER_METHOD

DEFAULT_STDOUT_CALLBACK

Description:Set the main callback used to display Ansible output, you can only have one at a time. You can have many other callbacks, but just one can be in charge of stdout.
Default:default
Ini Section:defaults
Ini Key:stdout_callback
Environment:ANSIBLE_STDOUT_CALLBACK

DEFAULT_STRATEGY

Description:Set the default strategy used for plays.
Default:linear
Version Added:2.3
Ini Section:defaults
Ini Key:strategy
Environment:ANSIBLE_STRATEGY

DEFAULT_STRATEGY_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Strategy Plugins.
Type:pathspec
Default:~/.ansible/plugins/strategy:/usr/share/ansible/plugins/strategy
Ini Section:defaults
Ini Key:strategy_plugins
Environment:ANSIBLE_STRATEGY_PLUGINS

DEFAULT_SU

Description:Toggle the use of “su” for tasks.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:su
Environment:ANSIBLE_SU

DEFAULT_SU_EXE

Description:specify an “su” executable, otherwise it relies on PATH.
Default:su
Ini Section:defaults
Ini Key:su_exe
Environment:ANSIBLE_SU_EXE
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SU_FLAGS

Description:Flags to pass to su
Default:None
Ini Section:defaults
Ini Key:su_flags
Environment:ANSIBLE_SU_FLAGS
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SU_USER

Description:User you become when using “su”, leaving it blank will use the default configured on the target (normally root)
Default:None
Ini Section:defaults
Ini Key:su_user
Environment:ANSIBLE_SU_USER
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SUDO

Description:Toggle the use of “sudo” for tasks.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:sudo
Environment:ANSIBLE_SUDO
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SUDO_EXE

Description:specify an “sudo” executable, otherwise it relies on PATH.
Default:sudo
Ini Section:defaults
Ini Key:sudo_exe
Environment:ANSIBLE_SUDO_EXE
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SUDO_FLAGS

Description:Flags to pass to “sudo”
Default:-H -S -n
Ini Section:defaults
Ini Key:sudo_flags
Environment:ANSIBLE_SUDO_FLAGS
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SUDO_USER

Description:User you become when using “sudo”, leaving it blank will use the default configured on the target (normally root)
Default:None
Ini Section:defaults
Ini Key:sudo_user
Environment:ANSIBLE_SUDO_USER
Deprecated in:2.8
Deprecated detail:
 In favor of become which is a generic framework
Deprecated alternatives:
 become

DEFAULT_SYSLOG_FACILITY

Description:Syslog facility to use when Ansible logs to the remote target
Default:LOG_USER
Ini Section:defaults
Ini Key:syslog_facility
Environment:ANSIBLE_SYSLOG_FACILITY

DEFAULT_TASK_INCLUDES_STATIC

Description:The include tasks can be static or dynamic, this toggles the default expected behaviour if autodetection fails and it is not explicitly set in task.
Type:boolean
Default:False
Version Added:2.1
Ini Section:defaults
Ini Key:task_includes_static
Environment:ANSIBLE_TASK_INCLUDES_STATIC
Deprecated in:2.8
Deprecated detail:
 include itself is deprecated and this setting will not matter in the future
Deprecated alternatives:
 None, as its already built into the decision between include_tasks and import_tasks

DEFAULT_TEST_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Jinja2 Test Plugins.
Type:pathspec
Default:~/.ansible/plugins/test:/usr/share/ansible/plugins/test
Ini Section:defaults
Ini Key:test_plugins
Environment:ANSIBLE_TEST_PLUGINS

DEFAULT_TIMEOUT

Description:This is the default timeout for connection plugins to use.
Type:integer
Default:10
Ini Section:defaults
Ini Key:timeout
Environment:ANSIBLE_TIMEOUT

DEFAULT_TRANSPORT

Description:Default connection plugin to use, the ‘smart’ option will toggle between ‘ssh’ and ‘paramiko’ depending on controller OS and ssh versions
Default:smart
Ini Section:defaults
Ini Key:transport
Environment:ANSIBLE_TRANSPORT

DEFAULT_UNDEFINED_VAR_BEHAVIOR

Description:When True, this causes ansible templating to fail steps that reference variable names that are likely typoed. Otherwise, any ‘{{ template_expression }}’ that contains undefined variables will be rendered in a template or ansible action line exactly as written.
Type:boolean
Default:True
Version Added:1.3
Ini Section:defaults
Ini Key:error_on_undefined_vars
Environment:ANSIBLE_ERROR_ON_UNDEFINED_VARS

DEFAULT_VARS_PLUGIN_PATH

Description:Colon separated paths in which Ansible will search for Vars Plugins.
Type:pathspec
Default:~/.ansible/plugins/vars:/usr/share/ansible/plugins/vars
Ini Section:defaults
Ini Key:vars_plugins
Environment:ANSIBLE_VARS_PLUGINS

DEFAULT_VAULT_ID_MATCH

Description:If true, decrypting vaults with a vault id will only try the password from the matching vault-id
Default:False
Ini Section:defaults
Ini Key:vault_id_match
Environment:ANSIBLE_VAULT_ID_MATCH

DEFAULT_VAULT_IDENTITY

Description:The label to use for the default vault id label in cases where a vault id label is not provided
Default:default
Ini Section:defaults
Ini Key:vault_identity
Environment:ANSIBLE_VAULT_IDENTITY

DEFAULT_VAULT_IDENTITY_LIST

Description:A list of vault-ids to use by default. Equivalent to multiple –vault-id args. Vault-ids are tried in order.
Type:list
Default:[]
Ini Section:defaults
Ini Key:vault_identity_list
Environment:ANSIBLE_VAULT_IDENTITY_LIST

DEFAULT_VAULT_PASSWORD_FILE

Description:The vault password file to use. Equivalent to –vault-password-file or –vault-id
Type:path
Default:None
Ini Section:defaults
Ini Key:vault_password_file
Environment:ANSIBLE_VAULT_PASSWORD_FILE

DEFAULT_VERBOSITY

Description:Sets the default verbosity, equivalent to the number of -v passed in the command line.
Type:integer
Default:0
Ini Section:defaults
Ini Key:verbosity
Environment:ANSIBLE_VERBOSITY

DEPRECATION_WARNINGS

Description:Toggle to control the showing of deprecation warnings
Type:boolean
Default:True
Ini Section:defaults
Ini Key:deprecation_warnings
Environment:ANSIBLE_DEPRECATION_WARNINGS

DIFF_ALWAYS

Description:Configuration toggle to tell modules to show differences when in ‘changed’ status, equivalent to --diff.
Type:bool
Default:False
Ini Section:diff
Ini Key:always
Environment:ANSIBLE_DIFF_ALWAYS

DIFF_CONTEXT

Description:How many lines of context to show when displaying the differences between files.
Type:integer
Default:3
Ini Section:diff
Ini Key:context
Environment:ANSIBLE_DIFF_CONTEXT

DISPLAY_ARGS_TO_STDOUT

Description:Normally ansible-playbook will print a header for each task that is run. These headers will contain the name: field from the task if you specified one. If you didn’t then ansible-playbook uses the task’s action to help you tell which task is presently running. Sometimes you run many of the same action and so you want more information about the task to differentiate it from others of the same action. If you set this variable to True in the config then ansible-playbook will also include the task’s arguments in the header. This setting defaults to False because there is a chance that you have sensitive values in your parameters and you do not want those to be printed. If you set this to True you should be sure that you have secured your environment’s stdout (no one can shoulder surf your screen and you aren’t saving stdout to an insecure file) or made sure that all of your playbooks explicitly added the no_log: True parameter to tasks which have sensistive values See How do I keep secret data in my playbook? for more information.
Type:boolean
Default:False
Version Added:2.1
Ini Section:defaults
Ini Key:display_args_to_stdout
Environment:ANSIBLE_DISPLAY_ARGS_TO_STDOUT

DISPLAY_SKIPPED_HOSTS

Description:Toggle to control displaying skipped task/host entries in a task in the default callback
Type:boolean
Default:True
Ini Section:defaults
Ini Key:display_skipped_hosts
Environment:DISPLAY_SKIPPED_HOSTS

ERROR_ON_MISSING_HANDLER

Description:Toggle to allow missing handlers to become a warning instead of an error when notifying.
Type:boolean
Default:True
Ini Section:defaults
Ini Key:error_on_missing_handler
Environment:ANSIBLE_ERROR_ON_MISSING_HANDLER

GALAXY_IGNORE_CERTS

Description:If set to yes, ansible-galaxy will not validate TLS certificates. This can be useful for testing against a server with a self-signed certificate.
Type:boolean
Default:False
Ini Section:galaxy
Ini Key:ignore_certs
Environment:ANSIBLE_GALAXY_IGNORE

GALAXY_ROLE_SKELETON

Description:Role skeleton directory to use as a template for the init action in ansible-galaxy, same as --role-skeleton.
Type:path
Default:None
Ini Section:galaxy
Ini Key:role_skeleton
Environment:ANSIBLE_GALAXY_ROLE_SKELETON

GALAXY_ROLE_SKELETON_IGNORE

Description:patterns of files to ignore inside a galaxy role skeleton directory
Type:list
Default:[‘^.git$’, ‘^.*/.git_keep$’]
Ini Section:galaxy
Ini Key:role_skeleton_ignore
Environment:ANSIBLE_GALAXY_ROLE_SKELETON_IGNORE

GALAXY_SERVER

Description:URL to prepend when roles don’t specify the full URI, assume they are referencing this server as the source.
Default:https://galaxy.ansible.com
Ini Section:galaxy
Ini Key:server
Environment:ANSIBLE_GALAXY_SERVER

HOST_KEY_CHECKING

Description:Set this to “False” if you want to avoid host key checking by the underlying tools Ansible uses to connect to the host
Type:boolean
Default:True
Ini Section:defaults
Ini Key:host_key_checking
Environment:ANSIBLE_HOST_KEY_CHECKING

INVENTORY_ENABLED

Description:List of enabled inventory plugins, it also determines the order in which they are used.
Type:list
Default:[‘host_list’, ‘script’, ‘yaml’, ‘ini’]
Ini Section:inventory
Ini Key:enable_plugins
Environment:ANSIBLE_INVENTORY_ENABLED

INVENTORY_IGNORE_EXTS

Description:List of extensions to ignore when using a directory as an inventory source
Type:list
Default:eval(BLACKLIST_EXTS + ( ‘~’, ‘.orig’, ‘.ini’, ‘.cfg’, ‘.retry’))
Ini Section:inventory
Ini Key:ignore_extensions
Ini Section:defaults
Ini Key:inventory_ignore_extensions
Environment:ANSIBLE_INVENTORY_IGNORE

INVENTORY_IGNORE_PATTERNS

Description:List of patterns to ignore when using a directory as an inventory source
Type:list
Default:[]
Ini Section:inventory
Ini Key:ignore_patterns
Ini Section:defaults
Ini Key:inventory_ignore_patterns
Environment:ANSIBLE_INVENTORY_IGNORE_REGEX

INVENTORY_UNPARSED_IS_FAILED

Description:If ‘true’ unparsed inventory sources become fatal errors, they are warnings otherwise.
Type:bool
Default:False
Ini Section:inventory
Ini Key:unparsed_is_failed
Environment:ANSIBLE_INVENTORY_UNPARSED_FAILED

MAX_FILE_SIZE_FOR_DIFF

Description:Maximum size of files to be considered for diff display
Type:int
Default:104448
Ini Section:defaults
Ini Key:max_diff_size
Environment:ANSIBLE_MAX_DIFF_SIZE

MERGE_MULTIPLE_CLI_TAGS

Description:This allows changing how multiple –tags and –skip-tags arguments are handled on the command line. In Ansible up to and including 2.3, specifying –tags more than once will only take the last value of –tags. Setting this config value to True will mean that all of the –tags options will be merged together. The same holds true for –skip-tags.
Type:bool
Default:True
Version Added:2.3
Ini Section:defaults
Ini Key:merge_multiple_cli_tags
Environment:ANSIBLE_MERGE_MULTIPLE_CLI_TAGS

NETWORK_GROUP_MODULES

Type:list
Default:[‘eos’, ‘nxos’, ‘ios’, ‘iosxr’, ‘junos’, ‘ce’, ‘vyos’, ‘sros’, ‘dellos9’, ‘dellos10’, ‘dellos6’, ‘asa’, ‘aruba’, ‘aireos’]
Ini Section:defaults
Ini Key:network_group_modules
Environment:NETWORK_GROUP_MODULES

PARAMIKO_HOST_KEY_AUTO_ADD

Type:boolean
Default:False
Ini Section:paramiko_connection
Ini Key:host_key_auto_add
Environment:ANSIBLE_PARAMIKO_HOST_KEY_AUTO_ADD

PARAMIKO_LOOK_FOR_KEYS

Type:boolean
Default:True
Ini Section:paramiko_connection
Ini Key:look_for_keys
Environment:ANSIBLE_PARAMIKO_LOOK_FOR_KEYS

PARAMIKO_PROXY_COMMAND

Default:None
Ini Section:paramiko_connection
Ini Key:proxy_command
Environment:ANSIBLE_PARAMIKO_PROXY_COMMAND

PARAMIKO_PTY

Type:boolean
Default:True
Ini Section:paramiko_connection
Ini Key:pty
Environment:ANSIBLE_PARAMIKO_PTY

PARAMIKO_RECORD_HOST_KEYS

Type:boolean
Default:True
Ini Section:paramiko_connection
Ini Key:record_host_keys
Environment:ANSIBLE_PARAMIKO_RECORD_HOST_KEYS

PERSISTENT_COMMAND_TIMEOUT

Description:This controls the amount of time to wait for response from remote device before timing out presistent connection.
Type:int
Default:10
Ini Section:persistent_connection
Ini Key:command_timeout
Environment:ANSIBLE_PERSISTENT_COMMAND_TIMEOUT

PERSISTENT_CONNECT_RETRY_TIMEOUT

Description:This contorls the retry timeout for presistent connection to connect to the local domain socket.
Type:integer
Default:15
Ini Section:persistent_connection
Ini Key:connect_retry_timeout
Environment:ANSIBLE_PERSISTENT_CONNECT_RETRY_TIMEOUT

PERSISTENT_CONNECT_TIMEOUT

Description:This controls how long the persistent connection will remain idle before it is destroyed.
Type:integer
Default:30
Ini Section:persistent_connection
Ini Key:connect_timeout
Environment:ANSIBLE_PERSISTENT_CONNECT_TIMEOUT

PERSISTENT_CONTROL_PATH_DIR

Description:Path to socket to be used by the connection persistence system.
Type:path
Default:~/.ansible/pc
Ini Section:persistent_connection
Ini Key:control_path_dir
Environment:ANSIBLE_PERSISTENT_CONTROL_PATH_DIR

RETRY_FILES_ENABLED

Description:This controls whether a failed Ansible playbook should create a .retry file.
Type:bool
Default:True
Ini Section:defaults
Ini Key:retry_files_enabled
Environment:ANSIBLE_RETRY_FILES_ENABLED

RETRY_FILES_SAVE_PATH

Description:This sets the path in which Ansible will save .retry files when a playbook fails and retry files are enabled.
Type:path
Default:None
Ini Section:defaults
Ini Key:retry_files_save_path
Environment:ANSIBLE_RETRY_FILES_SAVE_PATH

SHOW_CUSTOM_STATS

Description:This adds the custom stats set via the set_stats plugin to the default output
Type:bool
Default:False
Ini Section:defaults
Ini Key:show_custom_stats
Environment:ANSIBLE_SHOW_CUSTOM_STATS

STRING_TYPE_FILTERS

Description:This list of filters avoids ‘type conversion’ when templating variables Useful when you want to avoid conversion into lists or dictionaries for JSON strings, for example.
Type:list
Default:[‘string’, ‘to_json’, ‘to_nice_json’, ‘to_yaml’, ‘ppretty’, ‘json’]
Ini Section:jinja2
Ini Key:dont_type_filters
Environment:ANSIBLE_STRING_TYPE_FILTERS

SYSTEM_WARNINGS

Description:Allows disabling of warnings related to potential issues on the system running ansible itself (not on the managed hosts) These may include warnings about 3rd party packages or other conditions that should be resolved if possible.
Type:boolean
Default:True
Ini Section:defaults
Ini Key:system_warnings
Environment:ANSIBLE_SYSTEM_WARNINGS

USE_PERSISTENT_CONNECTIONS

Description:Toggles the use of persistence for connections.
Type:boolean
Default:False
Ini Section:defaults
Ini Key:use_persistent_connections
Environment:ANSIBLE_USE_PERSISTENT_CONNECTIONS

VARIABLE_PRECEDENCE

Description:Allows to change the group variable precedence merge order.
Type:list
Default:[‘all_inventory’, ‘groups_inventory’, ‘all_plugins_inventory’, ‘all_plugins_play’, ‘groups_plugins_inventory’, ‘groups_plugins_play’]
Version Added:2.4
Ini Section:defaults
Ini Key:precedence
Environment:ANSIBLE_PRECEDENCE

YAML_FILENAME_EXTENSIONS

Description:Check all of these extensions when looking for ‘variable’ files which should be YAML or JSON or vaulted versions of these. This affects vars_files, include_vars, inventory and vars plugins among others.
Type:list
Default:[‘.yml’, ‘.yaml’, ‘.json’]
Ini Section:yaml_valid_extensions
Ini Key:defaults
Environment:ANSIBLE_YAML_FILENAME_EXT

Environment Variables

ANSIBLE_CONFIG

Override the default ansible config file

ANSIBLE_MERGE_MULTIPLE_CLI_TAGS

This allows changing how multiple –tags and –skip-tags arguments are handled on the command line. In Ansible up to and including 2.3, specifying –tags more than once will only take the last value of –tags.Setting this config value to True will mean that all of the –tags options will be merged together. The same holds true for –skip-tags.

See also MERGE_MULTIPLE_CLI_TAGS

ACCELERATE_TIMEOUT

See also ACCELERATE_TIMEOUT

DISPLAY_SKIPPED_HOSTS

Toggle to control displaying skipped task/host entries in a task in the default callback

See also DISPLAY_SKIPPED_HOSTS

ANSIBLE_SUDO_FLAGS

Flags to pass to “sudo”

See also DEFAULT_SUDO_FLAGS

ANSIBLE_PERSISTENT_CONNECT_RETRY_TIMEOUT

This contorls the retry timeout for presistent connection to connect to the local domain socket.

See also PERSISTENT_CONNECT_RETRY_TIMEOUT

ANSIBLE_DIFF_CONTEXT

How many lines of context to show when displaying the differences between files.

See also DIFF_CONTEXT

ANSIBLE_PARAMIKO_PTY

See also PARAMIKO_PTY

ANSIBLE_TEST_PLUGINS

Colon separated paths in which Ansible will search for Jinja2 Test Plugins.

See also DEFAULT_TEST_PLUGIN_PATH

ANSIBLE_INVENTORY_ENABLED

List of enabled inventory plugins, it also determines the order in which they are used.

See also INVENTORY_ENABLED

ANSIBLE_GALAXY_ROLE_SKELETON_IGNORE

patterns of files to ignore inside a galaxy role skeleton directory

See also GALAXY_ROLE_SKELETON_IGNORE

ANSIBLE_PIPELINING

Pipelining, if supported by the connection plugin, reduces the number of network operations required to execute a module on the remote server, by executing many Ansible modules without actual file transfer.This can result in a very significant performance improvement when enabled.However this conflicts with privilege escalation (become). For example, when using ‘sudo:’ operations you must first disable ‘requiretty’ in /etc/sudoers on all managed hosts, which is why it is disabled by default.

See also ANSIBLE_PIPELINING

ANSIBLE_BECOME_METHOD

Privilege escalation method to use when become is enabled.

See also DEFAULT_BECOME_METHOD

ANSIBLE_HOST_KEY_CHECKING

Set this to “False” if you want to avoid host key checking by the underlying tools Ansible uses to connect to the host

See also HOST_KEY_CHECKING

ANSIBLE_ASK_SU_PASS

This controls whether an Ansible playbook should prompt for a su password.

See also DEFAULT_ASK_SU_PASS

ANSIBLE_SU_USER

User you become when using “su”, leaving it blank will use the default configured on the target (normally root)

See also DEFAULT_SU_USER

ANSIBLE_CALLABLE_WHITELIST

Whitelist of callable methods to be made available to template evaluation

See also DEFAULT_CALLABLE_WHITELIST

ACCELERATE_DAEMON_TIMEOUT

This setting controls the timeout for the accelerated daemon, as measured in minutes. The default daemon timeout is 30 minutes.Prior to 1.6, the timeout was hard-coded from the time of the daemon’s launch.For version 1.6+, the timeout is now based on the last activity to the daemon and is configurable via this option.

See also ACCELERATE_DAEMON_TIMEOUT

ACCELERATE_CONNECT_TIMEOUT

This setting controls the timeout for the socket connect call, and should be kept relatively low. The connection to the accelerate_port will be attempted 3 times before Ansible will fall back to ssh or paramiko (depending on your default connection setting) to try and start the accelerate daemon remotely.Note, this value can be set to less than one second, however it is probably not a good idea to do so unless you are on a very fast and reliable LAN. If you are connecting to systems over the internet, it may be necessary to increase this timeout.

See also ACCELERATE_CONNECT_TIMEOUT

ANSIBLE_GATHERING

This setting controls the default policy of fact gathering (facts discovered about remote systems).When ‘implicit’ (the default), the cache plugin will be ignored and facts will be gathered per play unless ‘gather_facts: False’ is set.When ‘explicit’ the inverse is true, facts will not be gathered unless directly requested in the play.The ‘smart’ value means each new host that has no facts discovered will be scanned, but if the same host is addressed in multiple plays it will not be contacted again in the playbook run.This option can be useful for those wishing to save fact gathering time. Both ‘smart’ and ‘explicit’ will use the cache plugin.

See also DEFAULT_GATHERING

ANSIBLE_TIMEOUT

This is the default timeout for connection plugins to use.

See also DEFAULT_TIMEOUT

ANSIBLE_SCP_IF_SSH

Prefered method to use when transfering files over sshWhen set to smart, Ansible will try them until one succeeds or they all failIf set to True, it will force ‘scp’, if False it will use ‘sftp’

See also DEFAULT_SCP_IF_SSH

ANSIBLE_NOCOWS

If you have cowsay installed but want to avoid the ‘cows’ (why????), use this.

See also ANSIBLE_NOCOWS

ANSIBLE_INVENTORY_IGNORE_REGEX

List of patterns to ignore when using a directory as an inventory source

See also INVENTORY_IGNORE_PATTERNS

ANSIBLE_NO_LOG

Toggle Ansible’s display and logging of task details, mainly used to avoid security disclosures.

See also DEFAULT_NO_LOG

ANSIBLE_MAX_DIFF_SIZE

Maximum size of files to be considered for diff display

See also MAX_FILE_SIZE_FOR_DIFF

ACCELERATE_KEYS_DIR

See also ACCELERATE_KEYS_DIR

ANSIBLE_KEEP_REMOTE_FILES

Enables/disables the cleaning up of the temporary files Ansible used to execute the tasks on the remote.

See also DEFAULT_KEEP_REMOTE_FILES

ANSIBLE_POLL_INTERVAL

For asynchronous tasks in Ansible (covered in Asynchronous Actions and Polling), this is how often to check back on the status of those tasks when an explicit poll interval is not supplied. The default is a reasonably moderate 15 seconds which is a tradeoff between checking in frequently and providing a quick turnaround when something may have completed.

See also DEFAULT_POLL_INTERVAL

ANSIBLE_PARAMIKO_PROXY_COMMAND

See also PARAMIKO_PROXY_COMMAND

ACCELERATE_MULTI_KEY

See also ACCELERATE_MULTI_KEY

ANSIBLE_BECOME_ALLOW_SAME_USER

This setting controls if become is skipped when remote user and become user are the same. I.E root sudo to root.

See also BECOME_ALLOW_SAME_USER

ANSIBLE_SSH_ARGS

If set, this will override the Ansible default ssh arguments.In particular, users may wish to raise the ControlPersist time to encourage performance. A value of 30 minutes may be appropriate.Be aware that if -o ControlPath is set in ssh_args, the control path setting is not used.

See also ANSIBLE_SSH_ARGS

ANSIBLE_ACTION_PLUGINS

Colon separated paths in which Ansible will search for Action Plugins.

See also DEFAULT_ACTION_PLUGIN_PATH

ANSIBLE_PARAMIKO_RECORD_HOST_KEYS

See also PARAMIKO_RECORD_HOST_KEYS

ANSIBLE_REMOTE_USER

Sets the login user for the target machinesWhen blank it uses the connection plugin’s default, normally the user currently executing Ansible.

See also DEFAULT_REMOTE_USER

ANSIBLE_INVENTORY_PLUGINS

Colon separated paths in which Ansible will search for Inventory Plugins.

See also DEFAULT_INVENTORY_PLUGIN_PATH

ANSIBLE_VAULT_PASSWORD_FILE

The vault password file to use. Equivalent to –vault-password-file or –vault-id

See also DEFAULT_VAULT_PASSWORD_FILE

ANSIBLE_CACHE_PLUGINS

Colon separated paths in which Ansible will search for Cache Plugins.

See also DEFAULT_CACHE_PLUGIN_PATH

ANSIBLE_CALLBACK_PLUGINS

Colon separated paths in which Ansible will search for Callback Plugins.

See also DEFAULT_CALLBACK_PLUGIN_PATH

ANSIBLE_CONNECTION_PLUGINS

Colon separated paths in which Ansible will search for Connection Plugins.

See also DEFAULT_CONNECTION_PLUGIN_PATH

ANSIBLE_JINJA2_EXTENSIONS

This is a developer-specific feature that allows enabling additional Jinja2 extensions.See the Jinja2 documentation for details. If you do not know what these do, you probably don’t need to change this setting :)

See also DEFAULT_JINJA2_EXTENSIONS

ANSIBLE_COMMAND_WARNINGS

By default Ansible will issue a warning when the shell or command module is used and the command appears to be similar to an existing Ansible module.These warnings can be silenced by adjusting this setting to False. You can also control this at the task level with the module optoin warn.

See also COMMAND_WARNINGS

ANSIBLE_COLOR_OK

Defines the color to use when showing ‘OK’ task status

See also COLOR_OK

ANSIBLE_COLOR_CHANGED

Defines the color to use on ‘Changed’ task status

See also COLOR_CHANGED

ANSIBLE_DISPLAY_ARGS_TO_STDOUT

Normally ansible-playbook will print a header for each task that is run. These headers will contain the name: field from the task if you specified one. If you didn’t then ansible-playbook uses the task’s action to help you tell which task is presently running. Sometimes you run many of the same action and so you want more information about the task to differentiate it from others of the same action. If you set this variable to True in the config then ansible-playbook will also include the task’s arguments in the header.This setting defaults to False because there is a chance that you have sensitive values in your parameters and you do not want those to be printed.If you set this to True you should be sure that you have secured your environment’s stdout (no one can shoulder surf your screen and you aren’t saving stdout to an insecure file) or made sure that all of your playbooks explicitly added the no_log: True parameter to tasks which have sensistive values See How do I keep secret data in my playbook? for more information.

See also DISPLAY_ARGS_TO_STDOUT

ANSIBLE_LOCAL_TEMP

Temporary directory for Ansible to use on the controller.

See also DEFAULT_LOCAL_TMP

ANSIBLE_COLOR_ERROR

Defines the color to use when emitting error messages

See also COLOR_ERROR

ANSIBLE_ERROR_ON_MISSING_HANDLER

Toggle to allow missing handlers to become a warning instead of an error when notifying.

See also ERROR_ON_MISSING_HANDLER

ANSIBLE_CACHE_PLUGIN

Chooses which cache plugin to use, the default ‘memory’ is ephimeral.

See also CACHE_PLUGIN

ANSIBLE_BECOME

Toggles the use of privilege escalation, allowing you to ‘become’ another user after login.

See also DEFAULT_BECOME

ANSIBLE_VERBOSITY

Sets the default verbosity, equivalent to the number of -v passed in the command line.

See also DEFAULT_VERBOSITY

ACCELERATE_KEYS_FILE_PERMS

See also ACCELERATE_KEYS_FILE_PERMS

ANSIBLE_SQUASH_ACTIONS

Ansible can optimise actions that call modules that support list parameters when using with_ looping. Instead of calling the module once for each item, the module is called once with the full list.The default value for this setting is only for certain package managers, but it can be used for any moduleCurrently, this is only supported for modules that have a name or pkg parameter, and only when the item is the only thing being passed to the parameter.

See also DEFAULT_SQUASH_ACTIONS

ANSIBLE_VARS_PLUGINS

Colon separated paths in which Ansible will search for Vars Plugins.

See also DEFAULT_VARS_PLUGIN_PATH

ANSIBLE_CACHE_PLUGIN_PREFIX

Prefix to use for cache plugin files/tables

See also CACHE_PLUGIN_PREFIX

ANSIBLE_FILTER_PLUGINS

Colon separated paths in which Ansible will search for Jinja2 Filter Plugins.

See also DEFAULT_FILTER_PLUGIN_PATH

ANSIBLE_GALAXY_ROLE_SKELETON

Role skeleton directory to use as a template for the init action in ansible-galaxy, same as --role-skeleton.

See also GALAXY_ROLE_SKELETON

ANSIBLE_PERSISTENT_CONNECT_TIMEOUT

This controls how long the persistent connection will remain idle before it is destroyed.

See also PERSISTENT_CONNECT_TIMEOUT

ANSIBLE_BECOME_ASK_PASS

Toggle to prompt for privilege escalation password.

See also DEFAULT_BECOME_ASK_PASS

ANSIBLE_PERSISTENT_COMMAND_TIMEOUT

This controls the amount of time to wait for response from remote device before timing out presistent connection.

See also PERSISTENT_COMMAND_TIMEOUT

ANSIBLE_HOSTS

Colon separated list of Ansible inventory sources

See also DEFAULT_HOST_LIST

ANSIBLE_INVENTORY

Colon separated list of Ansible inventory sources

See also DEFAULT_HOST_LIST

ANSIBLE_GATHER_TIMEOUT

Set the timeout in seconds for the implicit fact gathering.It does not apply to user defined M(setup) tasks.

See also DEFAULT_GATHER_TIMEOUT

ANSIBLE_LIBRARY

Colon separated paths in which Ansible will search for Modules.

See also DEFAULT_MODULE_PATH

ANSIBLE_MODULE_ARGS

This sets the default arguments to pass to the ansible adhoc binary if no -a is specified.

See also DEFAULT_MODULE_ARGS

ANSIBLE_VAULT_IDENTITY_LIST

A list of vault-ids to use by default. Equivalent to multiple –vault-id args. Vault-ids are tried in order.

See also DEFAULT_VAULT_IDENTITY_LIST

ANSIBLE_COLOR_DIFF_ADD

Defines the color to use when showing added lines in diffs

See also COLOR_DIFF_ADD

ANSIBLE_COW_WHITELIST

White list of cowsay templates that are ‘safe’ to use, set to empty list if you want to enable all installed templates.

See also ANSIBLE_COW_WHITELIST

ANSIBLE_SFTP_BATCH_MODE

See also DEFAULT_SFTP_BATCH_MODE

ANSIBLE_TRANSPORT

Default connection plugin to use, the ‘smart’ option will toggle between ‘ssh’ and ‘paramiko’ depending on controller OS and ssh versions

See also DEFAULT_TRANSPORT

ANSIBLE_GALAXY_SERVER

URL to prepend when roles don’t specify the full URI, assume they are referencing this server as the source.

See also GALAXY_SERVER

ANSIBLE_SSH_PIPELINING

Pipelining reduces the number of SSH operations required to execute a module on the remote server, by executing many Ansible modules without actual file transfer.This can result in a very significant performance improvement when enabled.However this conflicts with privilege escalation (become). For example, when using ‘sudo:’ operations you must first disable ‘requiretty’ in /etc/sudoers on all managed hosts, which is why it is disabled by default.

See also ANSIBLE_SSH_PIPELINING

ANSIBLE_FORCE_HANDLERS

This option controls if notified handlers run on a host even if a failure occurs on that host.When false, the handlers will not run if a failure has occurred on a host.This can also be set per play or on the command line. See Handlers and Failure for more details.

See also DEFAULT_FORCE_HANDLERS

ANSIBLE_SUDO_EXE

specify an “sudo” executable, otherwise it relies on PATH.

See also DEFAULT_SUDO_EXE

ANSIBLE_DEBUG

Toggles debug output in Ansible, VERY verbose and can hinder multiprocessing.

See also DEFAULT_DEBUG

ACCELERATE_KEYS_DIR_PERMS

See also ACCELERATE_KEYS_DIR_PERMS

ANSIBLE_STDOUT_CALLBACK

Set the main callback used to display Ansible output, you can only have one at a time.You can have many other callbacks, but just one can be in charge of stdout.

See also DEFAULT_STDOUT_CALLBACK

ANSIBLE_COLOR_DIFF_LINES

Defines the color to use when showing diffs

See also COLOR_DIFF_LINES

ANSIBLE_FACT_PATH

This option allows you to globally configure a custom path for ‘local_facts’ for the implied M(setup) task when using fact gathering.If not set, it will fallback to the default from the M(setup) module: /etc/ansible/facts.d.This does not affect user defined tasks that use the M(setup) module.

See also DEFAULT_FACT_PATH

ANSIBLE_TASK_INCLUDES_STATIC

The include tasks can be static or dynamic, this toggles the default expected behaviour if autodetection fails and it is not explicitly set in task.

See also DEFAULT_TASK_INCLUDES_STATIC

ANSIBLE_BECOME_FLAGS

Flags to pass to the privilege escalation executable.

See also DEFAULT_BECOME_FLAGS

ANSIBLE_SU_FLAGS

Flags to pass to su

See also DEFAULT_SU_FLAGS

ANSIBLE_COLOR_WARN

Defines the color to use when emitting warning messages

See also COLOR_WARN

ANSIBLE_COLOR_UNREACHABLE

Defines the color to use on ‘Unreachable’ status

See also COLOR_UNREACHABLE

ANSIBLE_ASK_SUDO_PASS

This controls whether an Ansible playbook should prompt for a sudo password.

See also DEFAULT_ASK_SUDO_PASS

ANSIBLE_SUDO

Toggle the use of “sudo” for tasks.

See also DEFAULT_SUDO

ANSIBLE_MODULE_LANG

Language locale setting to use for modules when they execute on the target, if empty it defaults to ‘en_US.UTF-8’

See also DEFAULT_MODULE_LANG

LIBVIRT_LXC_NOSECLABEL

This setting causes libvirt to connect to lxc containers by passing –noseclabel to virsh. This is necessary when running on systems which do not have SELinux.

See also DEFAULT_LIBVIRT_LXC_NOSECLABEL

ANSIBLE_NULL_REPRESENTATION

What templating should return as a ‘null’ value. When not set it will let Jinja2 decide.

See also DEFAULT_NULL_REPRESENTATION

ANSIBLE_COLOR_DIFF_REMOVE

Defines the color to use when showing removed lines in diffs

See also COLOR_DIFF_REMOVE

ANSIBLE_PRIVATE_ROLE_VARS

See also DEFAULT_PRIVATE_ROLE_VARS

ANSIBLE_COLOR_DEBUG

Defines the color to use when emitting debug messages

See also COLOR_DEBUG

ANSIBLE_LOAD_CALLBACK_PLUGINS

Controls whether callback plugins are loaded when running /usr/bin/ansible. This may be used to log activity from the command line, send notifications, and so on. Callback plugins are always loaded for ansible-playbook.

See also DEFAULT_LOAD_CALLBACK_PLUGINS

ANSIBLE_SYSLOG_FACILITY

Syslog facility to use when Ansible logs to the remote target

See also DEFAULT_SYSLOG_FACILITY

ANSIBLE_PARAMIKO_HOST_KEY_AUTO_ADD

See also PARAMIKO_HOST_KEY_AUTO_ADD

ANSIBLE_USE_PERSISTENT_CONNECTIONS

Toggles the use of persistence for connections.

See also USE_PERSISTENT_CONNECTIONS

ANSIBLE_VAULT_IDENTITY

The label to use for the default vault id label in cases where a vault id label is not provided

See also DEFAULT_VAULT_IDENTITY

ANSIBLE_YAML_FILENAME_EXT

Check all of these extensions when looking for ‘variable’ files which should be YAML or JSON or vaulted versions of these.This affects vars_files, include_vars, inventory and vars plugins among others.

See also YAML_FILENAME_EXTENSIONS

ANSIBLE_COLOR_VERBOSE

Defines the color to use when emitting verbose messages. i.e those that show with ‘-v’s.

See also COLOR_VERBOSE

ANSIBLE_COLOR_SKIP

Defines the color to use when showing ‘Skipped’ task status

See also COLOR_SKIP

ANSIBLE_STRING_TYPE_FILTERS

This list of filters avoids ‘type conversion’ when templating variablesUseful when you want to avoid conversion into lists or dictionaries for JSON strings, for example.

See also STRING_TYPE_FILTERS

ANSIBLE_REMOTE_PORT

Port to use in remote connections, when blank it will use the connection plugin default.

See also DEFAULT_REMOTE_PORT

ANSIBLE_ASK_VAULT_PASS

This controls whether an Ansible playbook should prompt for a vault password.

See also DEFAULT_ASK_VAULT_PASS

ANSIBLE_PRECEDENCE

Allows to change the group variable precedence merge order.

See also VARIABLE_PRECEDENCE

ANSIBLE_HASH_BEHAVIOUR

This setting controls how variables merge in Ansible. By default Ansible will override variables in specific precedence orders, as described in Variables. When a variable of higher precedence wins, it will replace the other value.Some users prefer that variables that are hashes (aka ‘dictionaries’ in Python terms) are merged. This setting is called ‘merge’. This is not the default behavior and it does not affect variables whose values are scalars (integers, strings) or arrays. We generally recommend not using this setting unless you think you have an absolute need for it, and playbooks in the official examples repos do not use this settingIn version 2.0 a combine filter was added to allow doing this for a particular variable (described in Filters).

See also DEFAULT_HASH_BEHAVIOUR

ANSIBLE_BECOME_USER

The user your login/remote user ‘becomes’ when using privilege escalation, most systems will use ‘root’ when no user is specified.

See also DEFAULT_BECOME_USER

ANSIBLE_ERROR_ON_UNDEFINED_VARS

When True, this causes ansible templating to fail steps that reference variable names that are likely typoed.Otherwise, any ‘{{ template_expression }}’ that contains undefined variables will be rendered in a template or ansible action line exactly as written.

See also DEFAULT_UNDEFINED_VAR_BEHAVIOR

ANSIBLE_CACHE_PLUGIN_TIMEOUT

Expiration timeout for the cache plugin data

See also CACHE_PLUGIN_TIMEOUT

ANSIBLE_SSH_CONTROL_PATH

This is the location to save ssh’s ControlPath sockets, it uses ssh’s variable substitution.Since 2.3, if null, ansible will generate a unique hash. Use %(directory)s to indicate where to use the control dir path setting.Before 2.3 it defaulted to control_path=%(directory)s/ansible-ssh-%%h-%%p-%%r.Be aware that this setting is ignored if -o ControlPath is set in ssh args.

See also ANSIBLE_SSH_CONTROL_PATH

ANSIBLE_REMOTE_TEMP

Temporary directory to use on targets when executing tasks.In some cases Ansible may still choose to use a system temporary dir to avoid permission issues.

See also DEFAULT_REMOTE_TMP

NETWORK_GROUP_MODULES

See also NETWORK_GROUP_MODULES

ANSIBLE_LOG_PATH

File to which Ansible will log on the controller. When empty logging is disabled.

See also DEFAULT_LOG_PATH

ANSIBLE_STRATEGY

Set the default strategy used for plays.

See also DEFAULT_STRATEGY

ANSIBLE_DIFF_ALWAYS

Configuration toggle to tell modules to show differences when in ‘changed’ status, equivalent to --diff.

See also DIFF_ALWAYS

ANSIBLE_NO_TARGET_SYSLOG

Toggle Ansbile logging to syslog on the target when it executes tasks.

See also DEFAULT_NO_TARGET_SYSLOG

ANSIBLE_MODULE_SET_LOCALE

Controls if we set locale for modules when executing on the target.

See also DEFAULT_MODULE_SET_LOCALE

ANSIBLE_LOOKUP_PLUGINS

Colon separated paths in which Ansible will search for Lookup Plugins.

See also DEFAULT_LOOKUP_PLUGIN_PATH

ANSIBLE_ASK_PASS

This controls whether an Ansible playbook should prompt for a login password. If using SSH keys for authentication, you probably do not needed to change this setting.

See also DEFAULT_ASK_PASS

ANSIBLE_INVENTORY_UNPARSED_FAILED

If ‘true’ unparsed inventory sources become fatal errors, they are warnings otherwise.

See also INVENTORY_UNPARSED_IS_FAILED

ANSIBLE_CALLBACK_WHITELIST

List of whitelisted callbacks, not all callbacks need whitelisting, but many of those shipped with Ansible do as we don’t want them activated by default.

See also DEFAULT_CALLBACK_WHITELIST

ANSIBLE_PRIVATE_KEY_FILE

Option for connections using a certificate or key file to authenticate, rather than an agent or passwords, you can set the default value here to avoid re-specifying –private-key with every invocation.

See also DEFAULT_PRIVATE_KEY_FILE

ANSIBLE_PERSISTENT_CONTROL_PATH_DIR

Path to socket to be used by the connection persistence system.

See also PERSISTENT_CONTROL_PATH_DIR

ANSIBLE_MODULE_UTILS

Colon separated paths in which Ansible will search for Module utils files, which are shared by modules.

See also DEFAULT_MODULE_UTILS_PATH

ANSIBLE_ROLES_PATH

Colon separated paths in which Ansible will search for Roles.

See also DEFAULT_ROLES_PATH

ANSIBLE_CACHE_PLUGIN_CONNECTION

Defines connection or path information for the cache plugin

See also CACHE_PLUGIN_CONNECTION

ANSIBLE_BECOME_EXE

executable to use for privilege escalation, otherwise Ansible will depend on PATH

See also DEFAULT_BECOME_EXE

ANSIBLE_SSH_RETRIES

Number of attempts to establish a connection before we give up and report the host as ‘UNREACHABLE’

See also ANSIBLE_SSH_RETRIES

ANSIBLE_COLOR_DEPRECATE

Defines the color to use when emitting deprecation messages

See also COLOR_DEPRECATE

ANSIBLE_EXECUTABLE

This indicates the command to use to spawn a shell under for Ansible’s execution needs on a target. Users may need to change this in rare instances when shell usage is constrained, but in most cases it may be left as is.

See also DEFAULT_EXECUTABLE

ANSIBLE_DEPRECATION_WARNINGS

Toggle to control the showing of deprecation warnings

See also DEPRECATION_WARNINGS

ANSIBLE_NOCOLOR

This setting allows suppressing colorizing output, which is used to give a better indication of failure and status information.

See also ANSIBLE_NOCOLOR

ANSIBLE_PARAMIKO_LOOK_FOR_KEYS

See also PARAMIKO_LOOK_FOR_KEYS

ANSIBLE_RETRY_FILES_ENABLED

This controls whether a failed Ansible playbook should create a .retry file.

See also RETRY_FILES_ENABLED

ANSIBLE_SUDO_USER

User you become when using “sudo”, leaving it blank will use the default configured on the target (normally root)

See also DEFAULT_SUDO_USER

ANSIBLE_STRATEGY_PLUGINS

Colon separated paths in which Ansible will search for Strategy Plugins.

See also DEFAULT_STRATEGY_PLUGIN_PATH

ANSIBLE_SSH_CONTROL_PATH_DIR

This sets the directory to use for ssh control path if the control path setting is null.Also, provides the %(directory)s variable for the control path setting.

See also ANSIBLE_SSH_CONTROL_PATH_DIR

ANSIBLE_INVENTORY_IGNORE

List of extensions to ignore when using a directory as an inventory source

See also INVENTORY_IGNORE_EXTS

ANSIBLE_GALAXY_IGNORE

If set to yes, ansible-galaxy will not validate TLS certificates. This can be useful for testing against a server with a self-signed certificate.

See also GALAXY_IGNORE_CERTS

ANSIBLE_RETRY_FILES_SAVE_PATH

This sets the path in which Ansible will save .retry files when a playbook fails and retry files are enabled.

See also RETRY_FILES_SAVE_PATH

ANSIBLE_SHOW_CUSTOM_STATS

This adds the custom stats set via the set_stats plugin to the default output

See also SHOW_CUSTOM_STATS

ANSIBLE_HANDLER_INCLUDES_STATIC

Since 2.0 M(include) can be ‘dynamic’, this setting (if True) forces that if the include appears in a handlers section to be ‘static’.

See also DEFAULT_HANDLER_INCLUDES_STATIC

ANSIBLE_COW_SELECTION

This allows you to chose a specific cowsay stencil for the banners or use ‘random’ to cycle through them.

See also ANSIBLE_COW_SELECTION

ACCELERATE_PORT

See also ACCELERATE_PORT

ANSIBLE_VAULT_ID_MATCH

If true, decrypting vaults with a vault id will only try the password from the matching vault-id

See also DEFAULT_VAULT_ID_MATCH

ANSIBLE_FORKS

Maximum number of forks Ansible will use to execute tasks on target hosts.

See also DEFAULT_FORKS

ANSIBLE_SU

Toggle the use of “su” for tasks.

See also DEFAULT_SU

ANSIBLE_GATHER_SUBSET

Set the gather_subset option for the M(setup) task in the implicit fact gathering. See the module documentation for specifics.It does not apply to user defined M(setup) tasks.

See also DEFAULT_GATHER_SUBSET

ANSIBLE_COLOR_HIGHLIGHT

Color used for highlights

See also COLOR_HIGHLIGHT

ANSIBLE_FORCE_COLOR

This options forces color mode even when running without a TTY or the “nocolor” setting is True.

See also ANSIBLE_FORCE_COLOR

ANSIBLE_SU_EXE

specify an “su” executable, otherwise it relies on PATH.

See also DEFAULT_SU_EXE

ANSIBLE_ANY_ERRORS_FATAL

Sets the default value for the any_errors_fatal keyword, if True, Task failures will be considered fatal errors.

See also ANY_ERRORS_FATAL

ANSIBLE_SYSTEM_WARNINGS

Allows disabling of warnings related to potential issues on the system running ansible itself (not on the managed hosts)These may include warnings about 3rd party packages or other conditions that should be resolved if possible.

See also SYSTEM_WARNINGS

ANSIBLE_SSH_TRANSFER_METHOD

unused?

See also DEFAULT_SSH_TRANSFER_METHOD

ANSIBLE_SSH_EXECUTABLE

This defines the location of the ssh binary. It defaults to ssh which will use the first ssh binary available in $PATH.This option is usually not required, it might be useful when access to system ssh is restricted, or when using ssh wrappers to connect to remote hosts.

See also ANSIBLE_SSH_EXECUTABLE