community.general.archive module – Creates a compressed archive of one or more files or trees

Note

This module is part of the community.general collection (version 10.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.general.archive.

Synopsis

• Creates or extends an archive.

• The source and archive are on the remote host, and the archive is not copied to the local host.

• Source files can be deleted after archival by specifying remove=True.

Requirements

The below requirements are needed on the host that executes this module.

• Requires lzma (standard library of Python 3) or backports.lzma (Python 2) if using xz format.

Parameters

Parameter	Comments
attributes aliases: attr string	The attributes the resulting filesystem object should have. To get supported flags look at the man page for chattr on the target system. This string should contain the attributes in the same order as the one displayed by lsattr. The = operator is assumed as default, otherwise + or - operators need to be included in the string.
dest path	The file name of the destination archive. The parent directory must exists on the remote host. This is required when path refers to multiple files by either specifying a glob, a directory or multiple paths in a list. If the destination archive already exists, it will be truncated and overwritten.
exclude_path list / elements=path	Remote absolute path, glob, or list of paths or globs for the file or files to exclude from path list and glob expansion. Use exclusion_patterns to instead exclude files or subdirectories below any of the paths from the path list. Default: []
exclusion_patterns list / elements=path added in community.general 3.2.0	Glob style patterns to exclude files or directories from the resulting archive. This differs from exclude_path which applies only to the source paths from path.
force_archive boolean	Allows you to force the module to treat this as an archive even if only a single file is specified. By default when a single file is specified it is compressed only (not archived). Enable this if you want to use ansible.builtin.unarchive on an archive of a single file created with this module. Choices: false ← (default) true
format string	The type of compression to use. Choices: "bz2" "gz" ← (default) "tar" "xz" "zip"
group string	Name of the group that should own the filesystem object, as would be fed to chown. When left unspecified, it uses the current group of the current user unless you are root, in which case it can preserve the previous ownership.
mode any	The permissions the resulting filesystem object should have. For those used to /usr/bin/chmod remember that modes are actually octal numbers. You must give Ansible enough information to parse them correctly. For consistent results, quote octal numbers (for example, '644' or '1777') so Ansible receives a string and can do its own conversion from string into number. Adding a leading zero (for example, 0755) works sometimes, but can fail in loops and some other circumstances. Giving Ansible a number without following either of these rules will end up with a decimal number which will have unexpected results. As of Ansible 1.8, the mode may be specified as a symbolic mode (for example, u+rwx or u=rw,g=r,o=r). If mode is not specified and the destination filesystem object does not exist, the default umask on the system will be used when setting the mode for the newly created filesystem object. If mode is not specified and the destination filesystem object does exist, the mode of the existing filesystem object will be used. Specifying mode is the best way to ensure filesystem objects are created with the correct permissions. See CVE-2020-1736 for further details.
owner string	Name of the user that should own the filesystem object, as would be fed to chown. When left unspecified, it uses the current user unless you are root, in which case it can preserve the previous ownership. Specifying a numeric username will be assumed to be a user ID and not a username. Avoid numeric usernames to avoid this confusion.
path list / elements=path / required	Remote absolute path, glob, or list of paths or globs for the file or files to compress or archive.
remove boolean	Remove any added source files and trees after adding to archive. Choices: false ← (default) true
selevel string	The level part of the SELinux filesystem object context. This is the MLS/MCS attribute, sometimes known as the range. When set to _default, it will use the level portion of the policy if available.
serole string	The role part of the SELinux filesystem object context. When set to _default, it will use the role portion of the policy if available.
setype string	The type part of the SELinux filesystem object context. When set to _default, it will use the type portion of the policy if available.
seuser string	The user part of the SELinux filesystem object context. By default it uses the system policy, where applicable. When set to _default, it will use the user portion of the policy if available.
unsafe_writes boolean	Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target filesystem object. By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target filesystem objects, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted filesystem objects, which cannot be updated atomically from inside the container and can only be written in an unsafe manner. This option allows Ansible to fall back to unsafe methods of updating filesystem objects when atomic operations fail (however, it doesn’t force Ansible to perform unsafe writes). IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption. Choices: false ← (default) true

Attributes

Attribute	Support	Description
check_mode	Support: full	Can run in check_mode and return changed status prediction without modifying target.
diff_mode	Support: none	Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

Notes

Note

• Can produce gzip, bzip2, lzma, and zip compressed files or archives.

• This module uses tarfile, zipfile, gzip, and bz2 packages on the target host to create archives. These are part of the Python standard library for Python 2 and 3.

See Also

See also

ansible.builtin.unarchive

Unpacks an archive after (optionally) copying it from the local machine.

Examples

- name: Compress directory /path/to/foo/ into /path/to/foo.tgz
  community.general.archive:
    path: /path/to/foo
    dest: /path/to/foo.tgz

- name: Compress regular file /path/to/foo into /path/to/foo.gz and remove it
  community.general.archive:
    path: /path/to/foo
    remove: true

- name: Create a zip archive of /path/to/foo
  community.general.archive:
    path: /path/to/foo
    format: zip

- name: Create a bz2 archive of multiple files, rooted at /path
  community.general.archive:
    path:
    - /path/to/foo
    - /path/wong/foo
    dest: /path/file.tar.bz2
    format: bz2

- name: Create a bz2 archive of a globbed path, while excluding specific dirnames
  community.general.archive:
    path:
    - /path/to/foo/*
    dest: /path/file.tar.bz2
    exclude_path:
    - /path/to/foo/bar
    - /path/to/foo/baz
    format: bz2

- name: Create a bz2 archive of a globbed path, while excluding a glob of dirnames
  community.general.archive:
    path:
    - /path/to/foo/*
    dest: /path/file.tar.bz2
    exclude_path:
    - /path/to/foo/ba*
    format: bz2

- name: Use gzip to compress a single archive (i.e don't archive it first with tar)
  community.general.archive:
    path: /path/to/foo/single.file
    dest: /path/file.gz
    format: gz

- name: Create a tar.gz archive of a single file.
  community.general.archive:
    path: /path/to/foo/single.file
    dest: /path/file.tar.gz
    format: gz
    force_archive: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
archived list / elements=string	Any files that were compressed or added to the archive. Returned: success
arcroot string	The archive root. Returned: always
dest_state string added in community.general 3.4.0	The state of the dest file. absent when the file does not exist. archive when the file is an archive. compress when the file is compressed, but not an archive. incomplete when the file is an archive, but some files under path were not found. Returned: success
expanded_exclude_paths list / elements=string	The list of matching exclude paths from the exclude_path argument. Returned: always
expanded_paths list / elements=string	The list of matching paths from paths argument. Returned: always
missing list / elements=string	Any files that were missing from the source. Returned: success
state string	The state of the input path. Returned: always

Authors

• Ben Doherty (@bendoh)

Collection links

• Issue Tracker
• Repository (Sources)
• Ask for help
• Submit a bug report
• Request a feature
• Communication