Documentation

aruba_config - Manage Aruba configuration sections

New in version 2.4.

Synopsis

  • Aruba configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with Aruba configuration sections in a deterministic way.

Parameters

Parameter Choices/Defaults Comments
after
The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set.
backup
bool
    Choices:
  • no ←
  • yes
This argument will cause the module to create a full backup of the current running-config from the remote device before any changes are made. The backup file is written to the backup folder in the playbook root directory. If the directory does not exist, it is created.
before
The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system.
diff_against
    Choices:
  • startup
  • intended
  • running
When using the ansible-playbook --diff command line argument the module can generate diffs against different sources.
When this option is configure as startup, the module will return the diff of the running-config against the startup-config.
When this option is configured as intended, the module will return the diff of the running-config against the configuration provided in the intended_config argument.
When this option is configured as running, the module will return the before and after diff of the running-config with respect to any changes made to the device configuration.
diff_ignore_lines
Use this argument to specify one or more lines that should be ignored during the diff. This is used for lines in the configuration that are automatically updated by the system. This argument takes a list of regular expressions or exact line matches.
encrypt
bool

(added in 2.5)
    Choices:
  • no
  • yes ←
This allows an Aruba controller's passwords and keys to be displayed in plain text when set to false or encrypted when set to true. If set to false, the setting will re-encrypt at the end of the module run. Backups are still encrypted even when set to false.
intended_config
The intended_config provides the master configuration that the node should conform to and is used to check the final running-config against. This argument will not modify any settings on the remote device and is strictly used to check the compliance of the current device's configuration against. When specifying this argument, the task should also modify the diff_against value and set it to intended.
lines
The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser.

aliases: commands
match
    Choices:
  • line ←
  • strict
  • exact
  • none
Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device.
parents
The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands.
provider
A dict object containing connection details.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
password
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port Default:
22
Specifies the port to use when building the connection to the remote. device.
replace
    Choices:
  • line ←
  • block
Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct.
running_config
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison.

aliases: config
save_when
(added in 2.5)
    Choices:
  • always
  • never ←
  • modified
  • changed
When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default. Using this argument will change that before. If the argument is set to always, then the running-config will always be copied to the startup-config and the modified flag will always be set to True. If the argument is set to modified, then the running-config will only be copied to the startup-config if it has changed since the last save to startup-config. If the argument is set to never, the running-config will never be copied to the startup-config. If the argument is set to changed, then the running-config will only be copied to the startup-config if the task has made a change.
src
Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with lines, parents.

Examples

- name: configure top level configuration
  aruba_config:
    lines: hostname {{ inventory_hostname }}

- name: diff the running-config against a provided config
  aruba_config:
    diff_against: intended
    intended: "{{ lookup('file', 'master.cfg') }}"

- name: configure interface settings
  aruba_config:
    lines:
      - description test interface
      - ip access-group 1 in
    parents: interface gigabitethernet 0/0/0

- name: load new acl into device
  aruba_config:
    lines:
      - permit host 10.10.10.10
      - ipv6 permit host fda9:97d6:32a3:3e59::3333
    parents: ip access-list standard 1
    before: no ip access-list standard 1
    match: exact

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
backup_path
string
when backup is yes
The full path to the backup file

Sample:
/playbooks/ansible/backup/[email protected]:28:34
commands
list
always
The set of commands that will be pushed to the remote device

Sample:
['hostname foo', 'vlan 1', 'name default']
updates
list
always
The set of commands that will be pushed to the remote device

Sample:
['hostname foo', 'vlan 1', 'name default']


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance

This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Community, see here.

Author

  • James Mighion (@jmighion)

Hint

If you notice any issues in this documentation you can edit this document to improve it.