community.network.ce_link_status module – Get interface link status on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 5.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_link_status.

Note

The community.network collection has been deprecated and will be removed from Ansible 12. See the discussion thread for more information.

DEPRECATED

Removed in:

version 6.0.0

Why:

This collection and all content in it is unmaintained and deprecated.

Alternative:

Unknown.

Synopsis

• Get interface link status on HUAWEI CloudEngine switches.

Aliases: network.cloudengine.ce_link_status

Parameters

Parameter	Comments
interface string / required	For the interface parameter, you can enter all to display information about all interfaces, an interface type such as 40GE to display information about interfaces of the specified type, or full name of an interface such as 40GE1/0/22 or vlanif10 to display information about the specific interface.

Notes

Note

• Current physical state shows an interface’s physical status.

• Current link state shows an interface’s link layer protocol status.

• Current IPv4 state shows an interface’s IPv4 protocol status.

• Current IPv6 state shows an interface’s IPv6 protocol status.

• Inbound octets(bytes) shows the number of bytes that an interface received.

• Inbound unicast(pkts) shows the number of unicast packets that an interface received.

• Inbound multicast(pkts) shows the number of multicast packets that an interface received.

• Inbound broadcast(pkts) shows the number of broadcast packets that an interface received.

• Inbound error(pkts) shows the number of error packets that an interface received.

• Inbound drop(pkts) shows the total number of packets that were sent to the interface but dropped by an interface.

• Inbound rate(byte/sec) shows the rate at which an interface receives bytes within an interval.

• Inbound rate(pkts/sec) shows the rate at which an interface receives packets within an interval.

• Outbound octets(bytes) shows the number of the bytes that an interface sent.

• Outbound unicast(pkts) shows the number of unicast packets that an interface sent.

• Outbound multicast(pkts) shows the number of multicast packets that an interface sent.

• Outbound broadcast(pkts) shows the number of broadcast packets that an interface sent.

• Outbound error(pkts) shows the total number of packets that an interface sent but dropped by the remote interface.

• Outbound drop(pkts) shows the number of dropped packets that an interface sent.

• Outbound rate(byte/sec) shows the rate at which an interface sends bytes within an interval.

• Outbound rate(pkts/sec) shows the rate at which an interface sends packets within an interval.

• Speed shows the rate for an Ethernet interface.

• This module requires the netconf system service be enabled on the remote device being managed.

• Recommended connection is netconf.

• This module also works with local connections for legacy playbooks.

Examples

- name: Link status test
  hosts: cloudengine
  connection: local
  gather_facts: false
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Get specified interface link status information
    community.network.ce_link_status:
      interface: 40GE1/0/1
      provider: "{{ cli }}"

  - name: Get specified interface type link status information
    community.network.ce_link_status:
      interface: 40GE
      provider: "{{ cli }}"

  - name: Get all interfaces link status information
    community.network.ce_link_status:
      interface: all
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

result dictionary

Interface link status information Returned: always Sample: {"40ge2/0/8": {"Current IPv4 state": "down", "Current IPv6 state": "down", "Current link state": "up", "Current physical state": "up", "Inbound broadcast(pkts)": "0", "Inbound drop(pkts)": "0", "Inbound error(pkts)": "0", "Inbound multicast(pkts)": "20151", "Inbound octets(bytes)": "7314813", "Inbound rate(byte/sec)": "11", "Inbound rate(pkts/sec)": "0", "Inbound unicast(pkts)": "0", "Outbound broadcast(pkts)": "1", "Outbound drop(pkts)": "0", "Outbound error(pkts)": "0", "Outbound multicast(pkts)": "20152", "Outbound octets(bytes)": "7235021", "Outbound rate(byte/sec)": "11", "Outbound rate(pkts/sec)": "0", "Outbound unicast(pkts)": "0", "Speed": "40GE"}}

Status

• This module will be removed in version 6.0.0. [deprecated]

• For more information see DEPRECATED.

Authors

• Zhijin Zhou (@QijunPan)

Collection links

• Issue Tracker
• Repository (Sources)