ce_vxlan_global – Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices

New in version 2.4.

Synopsis

  • Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices.

Parameters

Parameter Choices/Defaults Comments
bridge_domain_id
-
Specifies a bridge domain ID. The value is an integer ranging from 1 to 16777215.
nvo3_acl_extend
-
    Choices:
  • enable
  • disable
Enabling or disabling the VXLAN ACL extension function.
nvo3_ecmp_hash
-
    Choices:
  • enable
  • disable
Load balancing of VXLAN packets through ECMP in optimized mode.
nvo3_eth_trunk_hash
-
    Choices:
  • enable
  • disable
Eth-Trunk from load balancing VXLAN packets in optimized mode.
nvo3_gw_enhanced
-
    Choices:
  • l2
  • l3
Configuring the Layer 3 VXLAN Gateway to Work in Non-loopback Mode.
nvo3_prevent_loops
-
    Choices:
  • enable
  • disable
Loop prevention of VXLAN traffic in non-enhanced mode. When the device works in non-enhanced mode, inter-card forwarding of VXLAN traffic may result in loops.
nvo3_service_extend
-
    Choices:
  • enable
  • disable
Enabling or disabling the VXLAN service extension function.
state
-
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.
tunnel_mode_vxlan
-
    Choices:
  • enable
  • disable
Set the tunnel mode to VXLAN when configuring the VXLAN feature.

Examples

- name: vxlan global module test
  hosts: ce128
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Create bridge domain and set tunnel mode to VXLAN
    ce_vxlan_global:
      bridge_domain_id: 100
      nvo3_acl_extend: enable
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
verbose mode
k/v pairs of configuration after module execution

Sample:
{'bridge_domain_id': {'80': None, '90': None, '100': None}, 'nvo3_acl_extend': 'enable'}
existing
dictionary
verbose mode
k/v pairs of existing configuration

Sample:
{'bridge_domain': {'80': None, '90': None}, 'nvo3_acl_extend': 'disable'}
proposed
dictionary
verbose mode
k/v pairs of parameters passed into module

Sample:
{'bridge_domain_id': '100', 'nvo3_acl_extend': 'enable', 'state="present"': None}
updates
list
always
commands sent to the device

Sample:
['bridge-domain 100', 'ip tunnel mode vxlan']


Status

Authors

  • QijunPan (@QijunPan)

Hint

If you notice any issues in this documentation you can edit this document to improve it.