arista.eos.eos_lacp module – LACP resource module
Note
This module is part of the arista.eos collection (version 9.0.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install arista.eos
.
To use it in a playbook, specify: arista.eos.eos_lacp
.
New in arista.eos 1.0.0
Synopsis
This module manages Global Link Aggregation Control Protocol (LACP) on Arista EOS devices.
Aliases: lacp
Parameters
Parameter |
Comments |
---|---|
LACP global options. |
|
LACP system options. |
|
The system priority to use in LACP negotiations. Lower value is higher priority. Refer to vendor documentation for valid values. |
|
This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section ^lacp. The state parsed reads the configuration from |
|
The state of the configuration after module completion. Choices:
|
Notes
Note
Tested against Arista EOS 4.24.6F
This module works with connection
network_cli
. See the EOS Platform Options.
Examples
# Using merged
# Before state:
# -------------
# veos# show running-config | include lacp
# lacp system-priority 10
- name: Merge provided global LACP attributes with device attributes
arista.eos.eos_lacp:
config:
system:
priority: 20
state: merged
# After state:
# ------------
# veos# show running-config | include lacp
# lacp system-priority 20
#
# Using replaced
# Before state:
# -------------
# veos# show running-config | include lacp
# lacp system-priority 10
- name: Replace device global LACP attributes with provided attributes
arista.eos.eos_lacp:
config:
system:
priority: 20
state: replaced
# After state:
# ------------
# veos# show running-config | include lacp
# lacp system-priority 20
#
# Using deleted
# Before state:
# -------------
# veos# show running-config | include lacp
# lacp system-priority 10
- name: Delete global LACP attributes
arista.eos.eos_lacp:
state: deleted
# After state:
# ------------
# veos# show running-config | include lacp
#
# Using rendered:
- name: Use Rendered to convert the structured data to native config
arista.eos.eos_lacp:
config:
system:
priority: 20
state: rendered
# Output:
# ------------
# rendered:
# - "lacp system-priority 20"
#
# Using parsed:
# parsed.cfg
# lacp system-priority 20
- name: Use parsed to convert native configs to structured data
arista.eos.eos_lacp:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
# Output:
# parsed:
# system:
# priority: 20
# Using gathered:
# nathive config:
# -------------
# lacp system-priority 10
- name: Gather lacp facts from the device
arista.eos.eos_lacp:
state: gathered
# Output:
# gathered:
# system:
# priority: 10
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The configuration as structured data after module completion. Returned: when changed Sample: |
|
The configuration as structured data prior to module invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |