fortinet.fortios.fortios_vpn_ipsec_manualkey_interface module – Configure IPsec manual keys in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.3.5).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ipsec_manualkey_interface.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and manualkey_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.14

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

vpn_ipsec_manualkey_interface

dictionary

Configure IPsec manual keys.

addr_type

string

IP version to use for IP packets.

Choices:

  • "4"

  • "6"

auth_alg

string

Authentication algorithm. Must be the same for both ends of the tunnel.

Choices:

  • "null"

  • "md5"

  • "sha1"

  • "sha256"

  • "sha384"

  • "sha512"

auth_key

string

Hexadecimal authentication key in 16-digit (8-byte) segments separated by hyphens.

enc_alg

string

Encryption algorithm. Must be the same for both ends of the tunnel.

Choices:

  • "null"

  • "des"

  • "3des"

  • "aes128"

  • "aes192"

  • "aes256"

  • "aria128"

  • "aria192"

  • "aria256"

  • "seed"

enc_key

string

Hexadecimal encryption key in 16-digit (8-byte) segments separated by hyphens.

interface

string

Name of the physical, aggregate, or VLAN interface. Source system.interface.name.

ip_version

string

IP version to use for VPN interface.

Choices:

  • "4"

  • "6"

local_gw

string

IPv4 address of the local gateway”s external interface.

local_gw6

string

Local IPv6 address of VPN gateway.

local_spi

string

Local SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules.

name

string / required

IPsec tunnel name.

npu_offload

string

Enable/disable offloading IPsec VPN manual key sessions to NPUs.

Choices:

  • "enable"

  • "disable"

remote_gw

string

IPv4 address of the remote gateway”s external interface.

remote_gw6

string

Remote IPv6 address of VPN gateway.

remote_spi

string

Remote SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- name: Configure IPsec manual keys.
  fortinet.fortios.fortios_vpn_ipsec_manualkey_interface:
      vdom: "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      vpn_ipsec_manualkey_interface:
          addr_type: "4"
          auth_alg: "null"
          auth_key: "<your_own_value>"
          enc_alg: "null"
          enc_key: "<your_own_value>"
          interface: "<your_own_value> (source system.interface.name)"
          ip_version: "4"
          local_gw: "<your_own_value>"
          local_gw6: "<your_own_value>"
          local_spi: "<your_own_value>"
          name: "default_name_13"
          npu_offload: "enable"
          remote_gw: "<your_own_value>"
          remote_gw6: "<your_own_value>"
          remote_spi: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)