cisco.ios.ios_lacp module – Resource module to configure LACP.

Note

This module is part of the cisco.ios collection (version 5.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_lacp.

New in cisco.ios 1.0.0

Synopsis

  • This module provides declarative management of Global LACP on Cisco IOS network devices.

Aliases: lacp

Parameters

Parameter

Comments

config

dictionary

The provided configurations.

system

dictionary

This option sets the default system parameters for LACP.

priority

integer / required

LACP priority for the system.

Refer to vendor documentation for valid values.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command show lacp sys-id.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The module have declaratively similar behavior for replaced and overridden state.

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "rendered"

  • "parsed"

  • "gathered"

Notes

Note

Examples

# Using merged
#
# Before state:
# -------------
#
# vios#show lacp sys-id
# 32768, 5e00.0000.8000

- name: Merge provided configuration with device configuration
  cisco.ios.ios_lacp:
    config:
      system:
        priority: 123
    state: merged

# After state:
# ------------
#
# vios#show lacp sys-id
# 123, 5e00.0000.8000

# Using replaced
#
# Before state:
# -------------
#
# vios#show lacp sys-id
# 500, 5e00.0000.8000

- name: Replaces Global LACP configuration
  cisco.ios.ios_lacp:
    config:
      system:
        priority: 123
    state: replaced

# After state:
# ------------
#
# vios#show lacp sys-id
# 123, 5e00.0000.8000

# Using Deleted
#
# Before state:
# -------------
#
# vios#show lacp sys-id
# 500, 5e00.0000.8000

- name: Delete Global LACP attribute
  cisco.ios.ios_lacp:
    state: deleted

# After state:
# -------------
#
# vios#show lacp sys-id
# 32768, 5e00.0000.8000

# Using Gathered

# Before state:
# -------------
#
# vios#show lacp sys-id
# 123, 5e00.0000.8000

- name: Gather listed LACP with provided configurations
  cisco.ios.ios_lacp:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": {
#         "system": {
#             "priority": 500
#         }
#     }

# After state:
# ------------
#
# vios#show lacp sys-id
# 123, 5e00.0000.8000

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_lacp:
    config:
      system:
        priority: 123
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "lacp system-priority 10"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# lacp system-priority 123

- name: Parse the commands for provided configuration
  cisco.ios.ios_lacp:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": {
#         "system": {
#             "priority": 123
#         }
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The configuration as structured data after module completion.

Returned: when changed

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

list / elements=string

The configuration as structured data prior to module invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["lacp system-priority 10"]

Authors

  • Sumit Jaiswal (@justjais)