cisco.ios.ios_vlans module – Resource module to configure VLANs.

Note

This module is part of the cisco.ios collection (version 9.0.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_vlans.

New in cisco.ios 1.0.0

Synopsis

  • This module provides declarative management of VLANs on Cisco IOS network devices.

Aliases: vlans

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of VLANs options

member

dictionary

Members of VLAN

evi

integer

Ethernet Virtual Private Network (EVPN)

vni

integer / required

VXLAN vni

mtu

integer

VLAN Maximum Transmission Unit.

Refer to vendor documentation for valid values.

name

string

Ascii name of the VLAN.

NOTE, name should not be named/appended with default as it is reserved for device default vlans.

private_vlan

dictionary

Options for private vlan configuration.

associated

list / elements=integer

List of private VLANs associated with the primary . Only works with `type: primary`.

type

string

Private VLAN type

Choices:

  • "primary"

  • "isolated"

  • "community"

remote_span

boolean

Configure as Remote SPAN VLAN

Choices:

  • false

  • true

shutdown

string

Shutdown VLAN switching.

Choices:

  • "enabled"

  • "disabled"

state

string

Operational state of the VLAN

Choices:

  • "active"

  • "suspend"

vlan_id

integer / required

ID of the VLAN. Range 1-4094

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command show vlan.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of commands show vlan and show running-config | sec ^vlan configuration .+ executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "rendered"

  • "gathered"

  • "purged"

  • "parsed"

Notes

Note

Examples

# Using merged

# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0

- name: Merge provided configuration with device configuration
  cisco.ios.ios_vlans:
    config:
      - name: Vlan_10
        vlan_id: 10
        state: active
        shutdown: disabled
        remote_span: true
      - name: Vlan_20
        vlan_id: 20
        mtu: 610
        state: active
        shutdown: enabled
      - name: Vlan_30
        vlan_id: 30
        state: suspend
        shutdown: enabled
    state: merged

# After state:
# ------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   vlan_10                          active
# 20   vlan_20                          act/lshut
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1500  -      -      -        -    -        0      0
# 20   enet  100020     610   -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10

# Using merged

# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 201
#  member evpn-instance 201 vni 10201


- name: Merge provided configuration with device configuration
  cisco.ios.ios_vlans:
    config:
      - vlan_id: 102
        member:
          vni: 10102
          evi: 102
      - vlan_id: 901
        member:
          vni: 50901
    state: merged

# After state:
# ------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 201
#  member evpn-instance 201 vni 10201
# vlan configuration 901
#  member vni 50901

# Using overridden

# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   vlan_10                          active
# 20   vlan_20                          act/lshut
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1500  -      -      -        -    -        0      0
# 20   enet  100020     610   -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10

- name: Override device configuration of all VLANs with provided configuration
  cisco.ios.ios_vlans:
    config:
      - name: Vlan_10
        vlan_id: 10
        mtu: 1000
    state: overridden

# After state:
# ------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   Vlan_10                          active
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1000  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0


# Using overridden

# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 201
#  member evpn-instance 201 vni 10201
# vlan configuration 901
#  member vni 50901

- name: Override device configuration of all VLANs with provided configuration
  cisco.ios.ios_vlans:
    config:
      - vlan_id: 101
        member:
          vni: 10102
          evi: 102
      - vlan_id: 102
        member:
          vni: 10101
          evi: 101
    state: overridden

# After state:
# ------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 102 vni 10102
# vlan configuration 102
#  member evpn-instance 101 vni 10101

# Using replaced

# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   vlan_10                          active
# 20   vlan_20                          act/lshut
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1500  -      -      -        -    -        0      0
# 20   enet  100020     610   -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10

- name: Replaces device configuration of listed VLANs with provided configuration
  cisco.ios.ios_vlans:
    config:
      - vlan_id: 20
        name: Test_VLAN20
        mtu: 700
        shutdown: disabled
      - vlan_id: 50
        name: pvlan-isolated
        private_vlan:
          type: isolated
      - vlan_id: 60
        name: pvlan-community
        private_vlan:
          type: community
      - vlan_id: 70
        name: pvlan-primary
        private_vlan:
          type: primary
          associated:
            - 50
            - 60

    state: replaced

# After state:
# ------------
#
# vios_l2#sh vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/0, Gi0/1, Gi0/2, Gi0/3
# 10   Vlan_10                          active
# 20   Test_VLAN20                      active
# 50   pvlan-isolated                   active
# 60   pvlan-community                  active
# 70   pvlan-primary                    active
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1000  -      -      -        -    -        0      0
# 20   enet  100020     700   -      -      -        -    -        0      0
# 50   enet  100050     1500  -      -      -        -    -        0      0
# 60   enet  100051     1500  -      -      -        -    -        0      0
# 70   enet  100059     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
#
#
# Primary Secondary Type              Ports
# ------- --------- ----------------- ------------------------------------------
# 70      50        isolated
# 70      60        community

# Using deleted

# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   vlan_10                          active
# 20   vlan_20                          act/lshut
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1500  -      -      -        -    -        0      0
# 20   enet  100020     610   -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10

- name: Delete attributes of given VLANs
  cisco.ios.ios_vlans:
    config:
      - vlan_id: 10
      - vlan_id: 20
    state: deleted

# After state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0

# Using deleted

# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 201
#  member evpn-instance 201 vni 10201
# vlan configuration 901
#  member vni 50901

- name: Delete attributes of given VLANs
  cisco.ios.ios_vlans:
    config:
      - vlan_id: 101
    state: deleted

# After state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 201
#  member evpn-instance 201 vni 10201
# vlan configuration 901
#  member vni 50901

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured vlans attributes)"

# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   vlan_10                          active
# 20   vlan_20                          act/lshut
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1500  -      -      -        -    -        0      0
# 20   enet  100020     610   -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10

- name: Delete attributes of ALL VLANs
  cisco.ios.ios_vlans:
    state: deleted

# After state:
# -------------
#
# vios_l2#show vlan
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured vlans attributes)"

# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 201
#  member evpn-instance 201 vni 10201
# vlan configuration 202
#  member evpn-instance 202 vni 10202
# vlan configuration 901
#  member vni 50901

- name: Delete attributes of ALL VLANs
  cisco.ios.ios_vlans:
    state: deleted

# After state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# no vlan configuration 101
# no vlan configuration 102
# no vlan configuration 201
# no vlan configuration 202
# no vlan configuration 901
# no vlan configuration 902

# Using gathered, vlan configuration only

# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 201
#  member evpn-instance 201 vni 10201
# vlan configuration 202
#  member evpn-instance 202 vni 10202
# vlan configuration 901
#  member vni 50901

- name: Gather listed vlans with provided configurations
  cisco.ios.ios_vlans:
    state: gathered

# Module Execution Result:
# ------------------------
#
# gathered = [
#     {
#         "member": {
#             "evi": 101,
#             "vni": 10101
#         },
#         "vlan_id": 101
#     },
#     {
#         "member": {
#             "evi": 102,
#             "vni": 10102
#         },
#         "vlan_id": 102
#     },
#     {
#         "member": {
#             "evi": 201,
#             "vni": 10201
#         },
#         "vlan_id": 201
#     },
#     {
#         "member": {
#             "evi": 202,
#             "vni": 10202
#         },
#         "vlan_id": 202
#     },
#     {
#         "member": {
#             "vni": 50901
#         },
#         "vlan_id": 901
#     },
#     {
#         "member": {
#             "vni": 50902
#         },
#         "vlan_id": 902
#     }
# ]

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_vlans:
    config:
      - name: Vlan_10
        vlan_id: 10
        state: active
        shutdown: disabled
        remote_span: true
      - name: Vlan_20
        vlan_id: 20
        mtu: 610
        state: active
        shutdown: enabled
      - name: Vlan_30
        vlan_id: 30
        state: suspend
        shutdown: enabled
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "vlan 10",
#         "name Vlan_10",
#         "state active",
#         "remote-span",
#         "no shutdown",
#         "vlan 20",
#         "name Vlan_20",
#         "state active",
#         "mtu 610",
#         "shutdown",
#         "vlan 30",
#         "name Vlan_30",
#         "state suspend",
#         "shutdown"
#     ]

# Using Rendered

- name: Render the commands for provided configuration
  cisco.ios.ios_vlans:
    config:
      - vlan_id: 101
        member:
          vni: 10101
          evi: 101
      - vlan_id: 102
        member:
          vni: 10102
          evi: 102
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#     "vlan configuration 101",
#     "member evpn-instance 101 vni 10101",
#     "vlan configuration 102",
#     "member evpn-instance 102 vni 10102"
# ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 10   vlan_10                          active
# 20   vlan_20                          act/lshut
# 30   vlan_30                          sus/lshut
# 1002 fddi-default                     act/unsup
# 1003 token-ring-default               act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trnet-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 10   enet  100010     1500  -      -      -        -    -        0      0
# 20   enet  100020     1500  -      -      -        -    -        0      0
# 30   enet  100030     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 tr    101003     1500  -      -      -        -    -        0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trnet 101005     1500  -      -      -        ibm  -        0      0

- name: Parse the commands for provided configuration
  cisco.ios.ios_vlans:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "mtu": 1500,
#             "name": "default",
#             "shutdown": "disabled",
#             "state": "active",
#             "vlan_id": 1
#         },
#         {
#             "mtu": 1500,
#             "name": "vlan_10",
#             "shutdown": "disabled",
#             "state": "active",
#             "vlan_id": 10
#         },
#         {
#             "mtu": 1500,
#             "name": "vlan_20",
#             "shutdown": "enabled",
#             "state": "active",
#             "vlan_id": 20
#         },
#         {
#             "mtu": 1500,
#             "name": "vlan_30",
#             "shutdown": "enabled",
#             "state": "suspend",
#             "vlan_id": 30
#         },
#         {
#             "mtu": 1500,
#             "name": "fddi-default",
#             "shutdown": "enabled",
#             "state": "active",
#             "vlan_id": 1002
#         },
#         {
#             "mtu": 1500,
#             "name": "token-ring-default",
#             "shutdown": "enabled",
#             "state": "active",
#             "vlan_id": 1003
#         },
#         {
#             "mtu": 1500,
#             "name": "fddinet-default",
#             "shutdown": "enabled",
#             "state": "active",
#             "vlan_id": 1004
#         },
#         {
#             "mtu": 1500,
#             "name": "trnet-default",
#             "shutdown": "enabled",
#             "state": "active",
#             "vlan_id": 1005
#         }
#     ]

# Using Parsed Vlan configuration only

# File: parsed.cfg
# ----------------
#
# vlan configuration 101
#  member evpn-instance 101 vni 10101
# vlan configuration 102
#  member evpn-instance 102 vni 10102
# vlan configuration 901
#  member vni 50901

- name: Parse the commands for provided configuration
  cisco.ios.ios_vlans:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#     {
#         "member": {
#             "evi": 101,
#             "vni": 10101
#         },
#         "vlan_id": 101
#     },
#     {
#         "member": {
#             "evi": 102,
#             "vni": 10102
#         },
#         "vlan_id": 102
#     },
#     {
#         "member": {
#             "vni": 50901
#         },
#         "vlan_id": 901
#     }
# ]

# Using Parsed, Vlan and vlan configuration

# File: parsed.cfg
# ----------------
#
# VLAN Name                             Status    Ports
# ---- -------------------------------- --------- -------------------------------
# 1    default                          active    Gi0/1, Gi0/2
# 101  RemoteIsInMyName                 act/unsup Fa0/1, Fa0/4, Fa0/5, Fa0/6, Fa0/7, Fa0/8, Fa0/9, Fa0/10, Fa0/11, Fa0/12
#                                                 Fa0/13, Fa0/14, Fa0/15, Fa0/16, Fa0/17, Fa0/18, Fa0/19, Fa0/20, Fa0/21
#                                                 Fa0/22, Fa0/23, Fa0/24, Fa0/25, Fa0/26, Fa0/27, Fa0/28, Fa0/29, Fa0/30
#                                                 Fa0/31, Fa0/32, Fa0/33, Fa0/34, Fa0/35, Fa0/36, Fa0/37, Fa0/38, Fa0/39
#                                                 Fa0/40, Fa0/41, Fa0/42, Fa0/43, Fa0/44, Fa0/45, Fa0/46, Fa0/47, Fa0/48
# 150  VLAN0150                         active
# 888  a_very_long_vlan_name_a_very_long_vlan_name
#                                     active
# 1002 fddi-default                     act/unsup
# 1003 trcrf-default                    act/unsup
# 1004 fddinet-default                  act/unsup
# 1005 trbrf-default                    act/unsup
#
# VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1    enet  100001     1500  -      -      -        -    -        0      0
# 101  enet  100101     610   -      -      -        -    -        0      0
# 150  enet  100150     1500  -      -      -        -    -        0      0
# 888  enet  100888     1500  -      -      -        -    -        0      0
# 1002 fddi  101002     1500  -      -      -        -    -        0      0
# 1003 trcrf 101003     4472  1005   3276   -        -    srb      0      0
# 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
# 1005 trbrf 101005     4472  -      -      15       ibm  -        0      0
#
#
# VLAN AREHops STEHops Backup CRF
# ---- ------- ------- ----------
# 1003 7       7       off
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 150
#
# Primary Secondary Type              Ports
# ------- --------- ----------------- ------------------------------------------
#
# vlan configuration 101
#   member evpn-instance 101 vni 10101
# vlan configuration 102
#   member evpn-instance 102 vni 10102
# vlan configuration 901
#   member vni 50901

- name: Parse the commands for provided configuration
  cisco.ios.ios_vlans:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#     {
#         "name": "default",
#         "vlan_id": 1,
#         "state": "active",
#         "shutdown": "disabled",
#         "mtu": 1500,
#     },
#     {
#         "name": "RemoteIsInMyName",
#         "vlan_id": 101,
#         "state": "active",
#         "shutdown": "enabled",
#         "mtu": 610,
#         "member": {"evi": 101, "vni": 10101},
#     },
#     {
#         "name": "VLAN0150",
#         "vlan_id": 150,
#         "state": "active",
#         "shutdown": "disabled",
#         "mtu": 1500,
#         "remote_span": True,
#     },
#     {
#         "name": "a_very_long_vlan_name_a_very_long_vlan_name",
#         "vlan_id": 888,
#         "state": "active",
#         "shutdown": "disabled",
#         "mtu": 1500,
#     },
#     {
#         "name": "fddi-default",
#         "vlan_id": 1002,
#         "state": "active",
#         "shutdown": "enabled",
#         "mtu": 1500,
#     },
#     {
#         "name": "trcrf-default",
#         "vlan_id": 1003,
#         "state": "active",
#         "shutdown": "enabled",
#         "mtu": 4472,
#     },
#     {
#         "name": "fddinet-default",
#         "vlan_id": 1004,
#         "state": "active",
#         "shutdown": "enabled",
#         "mtu": 1500,
#     },
#     {
#         "name": "trbrf-default",
#         "vlan_id": 1005,
#         "state": "active",
#         "shutdown": "enabled",
#         "mtu": 4472,
#     },
#     {"vlan_id": 102, "member": {"evi": 102, "vni": 10102}},
#     {"vlan_id": 901, "member": {"vni": 50901}},
# ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["vlan configuration 202", "state active", "remote-span"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["vlan configuration 202", "member evpn-instance 202 vni 10202", "vlan 200"]

Authors

  • Sumit Jaiswal (@justjais)

  • Sagar Paul (@KB-perByte)

  • Padmini Priyadarshini Sivaraj (@PadminiSivaraj)