junipernetworks.junos.junos_lacp_interfaces module – LACP interfaces resource module
Note
This module is part of the junipernetworks.junos collection (version 8.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_lacp_interfaces.
New in junipernetworks.junos 1.0.0
Synopsis
This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on Juniper JUNOS devices.
Aliases: lacp_interfaces
Parameters
Parameter |
Comments |
|---|---|
The list of dictionaries of LACP interfaces options. |
|
This is a boolean argument to control if the port should be up in absence of received link Aggregation Control Protocol Data Unit (LACPDUS). This value is applicable for member interfaces only. Choices:
|
|
Name Identifier of the interface or link aggregation group. |
|
Timer interval for periodic transmission of LACP packets. If the value is set to Choices:
|
|
Priority of the member port. This value is applicable for member interfaces only. Refer to vendor documentation for valid values. |
|
The argument notifies minimum-link failure out of sync to peer. If the value is Choices:
|
|
This dict object contains configurable options related to LACP system parameters for the link aggregation group. This value is applicable for aggregate interface only. |
|
Specifies the system ID to use in LACP negotiations for the bundle, encoded as a MAC address. |
|
The system ID to use in LACP negotiations. |
|
Specifies the system priority to use in LACP negotiations for the bundle. Refer to vendor documentation for valid values. |
|
This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show interface. The state parsed reads the configuration from |
|
The state of the configuration after module completion. Choices:
|
Examples
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad ae4;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
- name: Merge provided configuration with device configuration
junipernetworks.junos.junos_lacp_interfaces:
config:
- name: ae0
period: fast
sync_reset: enable
system:
priority: 100
mac:
address: 00:00:00:00:00:02
- name: ge-0/0/3
port_priority: 100
force_up: true
state: merged
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad ae4;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae0;
# }
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# periodic fast;
# sync-reset enable;
# system-priority 100;
# system-id 00:00:00:00:00:02;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
# Using replaced
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad ae4;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae0;
# }
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# periodic fast;
# sync-reset enable;
# system-priority 100;
# system-id 00:00:00:00:00:02;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
- name: Replace device LACP interfaces configuration with provided configuration
junipernetworks.junos.junos_lacp_interfaces:
config:
- name: ae0
period: slow
state: replaced
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad ae4;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae0;
# }
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# periodic slow;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
# Using overridden
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad ae4;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae0;
# }
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# periodic slow;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
- name: Overrides all device LACP interfaces configuration with provided configuration
junipernetworks.junos.junos_lacp_interfaces:
config:
- name: ae0
system:
priority: 300
mac:
address: 00:00:00:00:00:03
- name: ge-0/0/2
port_priority: 200
force_up: false
state: overridden
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad {
# lacp {
# port-priority 200;
# }
# ae4;
# }
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae0;
# }
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# system-priority 300;
# system-id 00:00:00:00:00:03;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
# Using deleted
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad {
# lacp {
# port-priority 200;
# }
# ae4;
# }
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae0;
# }
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# system-priority 300;
# system-id 00:00:00:00:00:03;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
- name: "Delete LACP interfaces attributes of given interfaces (Note: This won't delete the interface itself)"
junipernetworks.junos.junos_lacp_interfaces:
config:
- name: ae0
- name: ge-0/0/3
- name: ge-0/0/2
state: deleted
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
# ether-options {
# 802.3ad ae4;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface merged";
# aggregated-ether-options {
# lacp {
# passive;
# }
# }
# }
# ae4 {
# description "test aggregate interface";
# aggregated-ether-options {
# lacp {
# passive;
# link-protection;
# }
# }
# }
# Using gathered
# Before state:
# ------------
#
# user@junos01# show interfaces
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae1;
# }
# }
# }
# ge-0/0/2 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad ae2;
# }
# }
# ge-0/0/4 {
# ether-options {
# 802.3ad ae2;
# }
# }
# ge-1/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.1/24;
# address 10.200.16.20/24;
# }
# family inet6;
# }
# }
# ge-2/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.2/24;
# address 10.200.16.21/24;
# }
# family inet6;
# }
# }
# ge-3/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.3/24;
# address 10.200.16.22/24;
# }
# family inet6;
# }
# }
# ae1 {
# description "Configured by Ansible";
# aggregated-ether-options {
# lacp {
# periodic fast;
# sync-reset enable;
# system-priority 100;
# system-id 00:00:00:00:00:02;
# }
# }
# }
# ae2 {
# description "Configured by Ansible";
# }
# em1 {
# description TEST;
# }
# fxp0 {
# description ANSIBLE;
# speed 1g;
# link-mode automatic;
# unit 0 {
# family inet {
# address 10.8.38.38/24;
# }
# }
# }
- name: Gather junos lacp interfaces as in given arguments
junipernetworks.junos.junos_lacp_interfaces:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
# {
# "force_up": true,
# "name": "ge-0/0/1",
# "port_priority": 100
# },
# {
# "name": "ae1",
# "period": "fast",
# "sync_reset": "enable",
# "system": {
# "mac": {
# "address": "00:00:00:00:00:02"
# },
# "priority": 100
# }
# }
# ]
# After state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
# ether-options {
# 802.3ad {
# lacp {
# force-up;
# port-priority 100;
# }
# ae1;
# }
# }
# }
# ge-0/0/2 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad ae2;
# }
# }
# ge-0/0/4 {
# ether-options {
# 802.3ad ae2;
# }
# }
# ge-1/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.1/24;
# address 10.200.16.20/24;
# }
# family inet6;
# }
# }
# ge-2/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.2/24;
# address 10.200.16.21/24;
# }
# family inet6;
# }
# }
# ge-3/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.3/24;
# address 10.200.16.22/24;
# }
# family inet6;
# }
# }
# ae1 {
# description "Configured by Ansible";
# aggregated-ether-options {
# lacp {
# periodic fast;
# sync-reset enable;
# system-priority 100;
# system-id 00:00:00:00:00:02;
# }
# }
# }
# ae2 {
# description "Configured by Ansible";
# }
# em1 {
# description TEST;
# }
# fxp0 {
# description ANSIBLE;
# speed 1g;
# link-mode automatic;
# unit 0 {
# family inet {
# address 10.8.38.38/24;
# }
# }
# }
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <interfaces>
# <interface>
# <name>ge-0/0/1</name>
# <ether-options>
# <ieee-802.3ad>
# <lacp>
# <force-up/>
# <port-priority>100</port-priority>
# </lacp>
# <bundle>ae1</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/2</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae1</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/3</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae2</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/4</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae2</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-1/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.1/24</name>
# </address>
# <address>
# <name>10.200.16.20/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ge-2/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.2/24</name>
# </address>
# <address>
# <name>10.200.16.21/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ge-3/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.3/24</name>
# </address>
# <address>
# <name>10.200.16.22/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ae1</name>
# <description>Configured by Ansible</description>
# <aggregated-ether-options>
# <lacp>
# <periodic>fast</periodic>
# <sync-reset>enable</sync-reset>
# <system-priority>100</system-priority>
# <system-id>00:00:00:00:00:02</system-id>
# </lacp>
# </aggregated-ether-options>
# </interface>
# <interface>
# <name>ae2</name>
# <description>Configured by Ansible</description>
# </interface>
# <interface>
# <name>em1</name>
# <description>TEST</description>
# </interface>
# <interface>
# <name>fxp0</name>
# <description>ANSIBLE</description>
# <speed>1g</speed>
# <link-mode>automatic</link-mode>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>10.8.38.38/24</name>
# </address>
# </inet>
# </family>
# </unit>
# </interface>
# </interfaces>
# </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lacp_interfaces:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
# {
# "force_up": true,
# "name": "ge-0/0/1",
# "port_priority": 100
# },
# {
# "name": "ae1",
# "period": "fast",
# "sync_reset": "enable",
# "system": {
# "mac": {
# "address": "00:00:00:00:00:02"
# },
# "priority": 100
# }
# }
# ]
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lacp_interfaces:
config:
- name: ae1
period: fast
sync_reset: enable
system:
priority: 100
mac:
address: 00:00:00:00:00:02
- name: ge-0/0/1
port_priority: 100
force_up: true
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:interfaces
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:interface>
# <nc:name>ae1</nc:name>
# <nc:aggregated-ether-options>
# <nc:lacp>
# <nc:periodic>fast</nc:periodic>
# <nc:sync-reset>enable</nc:sync-reset>
# <nc:system-id>00:00:00:00:00:02</nc:system-id>
# <nc:system-priority>100</nc:system-priority>
# </nc:lacp>
# </nc:aggregated-ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/1</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:lacp>
# <nc:port-priority>100</nc:port-priority>
# <nc:force-up/>
# </nc:lacp>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# </nc:interfaces>"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The configuration as structured data after module completion. Returned: when changed Sample: |
|
The configuration as structured data prior to module invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |