junipernetworks.junos.junos_lldp_global module – LLDP resource module
Note
This module is part of the junipernetworks.junos collection (version 8.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install junipernetworks.junos.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: junipernetworks.junos.junos_lldp_global.
New in junipernetworks.junos 1.0.0
Synopsis
This module manages link layer discovery protocol (LLDP) attributes on Juniper JUNOS devices.
Aliases: lldp_global
Requirements
The below requirements are needed on the host that executes this module.
ncclient (>=v0.6.4)
Parameters
Parameter |
Comments |
|---|---|
The list of link layer discovery protocol attribute configurations |
|
This argument sets the management address from LLDP. |
|
This argument is a boolean value to enabled or disable LLDP. Choices:
|
|
Specify the number of seconds that LLDP information is held before it is discarded. The multiplier value is used in combination with the |
|
Frequency at which LLDP advertisements are sent (in seconds). |
|
Specify the number of seconds the device waits before sending advertisements to neighbors after a change is made in local system. |
|
This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show protocols lldp. The state parsed reads the configuration from |
|
The state of the configuration after module completion. Choices:
|
Notes
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 18.4R1.
This module works with connection
netconf. See the Junos OS Platform Options.
Examples
# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
#
- name: Merge provided configuration with device configuration
junipernetworks.junos.junos_lldp_global:
config:
interval: 10000
address: 10.1.1.1
transmit_delay: 400
hold_multiplier: 10
state: merged
# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
- name: Replace provided configuration with device configuration
junipernetworks.junos.junos_lldp_global:
config:
address: 20.2.2.2
hold_multiplier: 30
enabled: false
state: replaced
# After state:
# -------------
# user@junos01# show protocols lldp
# disable;
# management-address 20.2.2.2;
# hold-multiplier 30;
# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 20.2.2.2;
# hold-multiplier 30;
- name: Delete lldp configuration (this will by default remove all lldp configuration)
junipernetworks.junos.junos_lldp_global:
state: deleted
# After state:
# -------------
# user@junos01# # show protocols lldp
#
#
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# interface ge-0/0/1;
# interface ge-0/0/2 {
# disable;
# }
- name: Gather junos lldp_global as in given arguments
junipernetworks.junos.junos_lldp_global:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
# "address": "10.1.1.1",
# "hold_multiplier": 10,
# "interval": 10000,
# "transmit_delay": 400
# }
# After state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# interface ge-0/0/1;
# interface ge-0/0/2 {
# disable;
# }
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lldp_global:
config:
interval: 10000
address: 10.1.1.1
transmit_delay: 400
hold_multiplier: 10
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:protocols
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:lldp>
# <nc:management-address>10.1.1.1</nc:management-address>
# <nc:advertisement-interval>10000</nc:advertisement-interval>
# <nc:transmit-delay>400</nc:transmit-delay>
# <nc:hold-multiplier>10</nc:hold-multiplier>
# <nc:disable delete="delete"/>
# </nc:lldp>
# </nc:protocols>"
#
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <protocols>
# <ospf>
# <area>
# <name>0.0.0.0</name>
# <interface>
# <name>ge-0/0/0.0</name>
# </interface>
# </area>
# </ospf>
# <lldp>
# <management-address>10.1.1.1</management-address>
# <advertisement-interval>10000</advertisement-interval>
# <transmit-delay>400</transmit-delay>
# <hold-multiplier>10</hold-multiplier>
# <interface>
# <name>ge-0/0/1</name>
# </interface>
# <interface>
# <name>ge-0/0/2</name>
# <disable/>
# </interface>
# </lldp>
# </protocols>
# </configuration>
# </rpc-reply>
# - name: Convert lldp global config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lldp_global:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
# "address": "10.1.1.1",
# "hold_multiplier": 10,
# "interval": 10000,
# "transmit_delay": 400
# }
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The configuration as structured data after module completion. Returned: when changed Sample: |
|
The configuration as structured data prior to module invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |