junos_ping – Tests reachability using ping from devices running Juniper JUNOS

New in version 2.8.

Synopsis

  • Tests reachability using ping from devices running Juniper JUNOS to a remote destination.
  • Tested against Junos (17.3R1.10)
  • For a general purpose network module, see the net_ping module.
  • For Windows targets, use the win_ping module instead.
  • For targets running Python, use the ping module instead.

Parameters

Parameter Choices/Defaults Comments
count
integer
Default:
5
Number of packets to send to check reachability.
dest
- / required
The IP Address or hostname (resolvable by the device) of the remote node.
interface
-
The source interface to use while sending the ping packet(s).
interval
integer
Determines the interval (in seconds) between consecutive pings.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.
For more information please see the Junos OS Platform Options guide.

A dict object containing connection details.
host
string / required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Default:
22
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device.
ssh_keyfile
path
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
size
integer
Determines the size (in bytes) of the ping packet(s).
source
-
The IP Address to use while sending the ping packet(s).
state
-
    Choices:
  • absent
  • present ←
Determines if the expected result is success or fail.
ttl
integer
The time-to-live value for the ICMP packet(s).

Notes

Note

Examples

- name: Test reachability to 10.10.10.10
  junos_ping:
    dest: 10.10.10.10

- name: Test reachability to 10.20.20.20 using source and size set
  junos_ping:
    dest: 10.20.20.20
    size: 1024
    ttl: 128

- name: Test unreachability to 10.30.30.30 using interval
  junos_ping:
    dest: 10.30.30.30
    interval: 3
    state: absent

- name: Test reachability to 10.40.40.40 setting count and interface
  junos_ping:
    dest: 10.40.40.40
    interface: fxp0
    count: 20
    size: 512

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always
List of commands sent.

Sample:
['ping 10.8.38.44 count 10 source 10.8.38.38 ttl 128']
packet_loss
string
always
Percentage of packets lost.

Sample:
0%
packets_rx
integer
always
Packets successfully received.

Sample:
20
packets_tx
integer
always
Packets successfully transmitted.

Sample:
20
rtt
dictionary
when ping succeeds
The round trip time (RTT) stats.

Sample:
{'avg': 2, 'max': 8, 'min': 1, 'stddev': 24}


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Nilashish Chakraborty (@nilashishc)

Hint

If you notice any issues in this documentation you can edit this document to improve it.