cisco.mso.mso_schema_site_anp_epg_domain module – Manage site-local EPG domains in schema template
Note
This module is part of the cisco.mso collection (version 2.9.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.mso
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.mso.mso_schema_site_anp_epg_domain
.
Synopsis
Manage site-local EPG domains in schema template on Cisco ACI Multi-Site.
Requirements
The below requirements are needed on the host that executes this module.
Multi Site Orchestrator v2.1 or newer
Parameters
Parameter |
Comments |
---|---|
Specifies microsegmentation is enabled or not. This attribute can only be used with VMM domain association. Choices:
|
|
The allow promiscuous state of the domain association. This attribute can only be used with VMM domain association. Choices:
|
|
The name of the ANP. |
|
Which binding_type to use with this domain association. This attribute can only be used with VMM domain association. Choices:
|
|
Which custom_epg_name to use with this domain association. This attribute can only be used with VMM domain association. |
|
Which delimiter to use with this domain association. This attribute can only be used with VMM domain association. Choices:
|
|
The deployment immediacy of the domain.
Choices:
|
|
The type of domain to associate. Choices:
|
|
The domain profile name. |
|
Distinguished name of EPG lagpolicy. This attribute can only be used with VMM domain association. |
|
EPG enhanced lagpolicy name. This attribute can only be used with VMM domain association. |
|
The name of the EPG. |
|
The forged transmits state of the domain association. This attribute can only be used with VMM domain association. Choices:
|
|
IP Address or hostname of the ACI Multi Site Orchestrator host. If the value is not specified in the task, the value of environment variable |
|
The login domain name to use for authentication. The default value is Local. If the value is not specified in the task, the value of environment variable When using a HTTPAPI connection plugin the inventory variable |
|
The mac changes state of the domain association. This attribute can only be used with VMM domain association. Choices:
|
|
Virtual LAN for microsegmentation. This attribute can only be used with VMM domain association. |
|
Virtual LAN type for microsegmentation. This attribute can only be used with VMM domain association. Choices:
|
|
The netflow preference state of the domain association. This attribute can only be used with VMM domain association. Choices:
|
|
Number of ports for the binding type. This attribute can only be used with VMM domain association. |
|
Influence the output of this MSO module.
If the value is not specified in the task, the value of environment variable Choices:
|
|
The password to use for authentication. If the value is not specified in the task, the value of environment variables |
|
Port number to be used for the REST connection. The default value depends on parameter `use_ssl`. If the value is not specified in the task, the value of environment variable |
|
Port allocation for the binding type. This attribute can only be used with VMM domain association and binding type in static. Required when Choices:
|
|
Virtual LAN type for port encap. This attribute can only be used with VMM domain association. |
|
Virtual LAN type for port encap. This attribute can only be used with VMM domain association. Choices:
|
|
Determines when the policies should be resolved and available. Defaults to Choices:
|
|
The name of the schema. |
|
The name of the site. |
|
Use Use Choices:
|
|
Which switch type to use with this domain association. This attribute can only be used with VMM domain association. |
|
Which switching mode to use with this domain association. This attribute can only be used with VMM domain association. |
|
The name of the template. |
|
The socket level timeout in seconds. The default value is 30 seconds. If the value is not specified in the task, the value of environment variable |
|
If If the value is not specified in the task, the value of environment variable The default is Choices:
|
|
If If the value is not specified in the task, the value of environment variable When using a HTTPAPI connection plugin the inventory variable The default is Choices:
|
|
The username to use for authentication. If the value is not specified in the task, the value of environment variables |
|
If This should only set to If the value is not specified in the task, the value of environment variable The default is Choices:
|
|
Which VLAN enacap mode to use. This attribute can only be used with VMM domain association. Choices:
|
Notes
Note
The ACI MultiSite PATCH API has a deficiency requiring some objects to be referenced by index. This can cause silent corruption on concurrent access when changing/removing on object as the wrong object may be referenced. This module is affected by this deficiency.
This module was written to support Multi Site Orchestrator v2.1 or newer. Some or all functionality may not work on earlier versions.
See Also
See also
- cisco.mso.mso_schema_site_anp_epg
Manage site-local Endpoint Groups (EPGs) in schema template.
- cisco.mso.mso_schema_template_anp_epg
Manage Endpoint Groups (EPGs) in schema templates.
Examples
- name: Add a new domain to a site EPG
cisco.mso.mso_schema_site_anp_epg_domain:
host: mso_host
username: admin
password: SomeSecretPassword
schema: Schema1
site: Site1
template: Template1
anp: ANP1
epg: EPG1
domain_association_type: vmmDomain
domain_profile: 'VMware-VMM'
deployment_immediacy: lazy
resolution_immediacy: pre-provision
state: present
- name: Add a new domain to a site EPG with all possible attributes set
cisco.mso.mso_schema_site_anp_epg_domain:
host: mso_host
username: admin
password: SomeSecretPassword
schema: Schema1
site: Site1
template: Template1
anp: ANP1
epg: EPG1
domain_association_type: vmmDomain
domain_profile: 'VMware-VMM'
deployment_immediacy: immediate
resolution_immediacy: immediate
micro_seg_vlan_type: vlan
micro_seg_vlan: 100
port_encap_vlan_type: vlan
port_encap_vlan: 100
vlan_encap_mode: static
allow_micro_segmentation: true
switch_type: default
switching_mode: native
enhanced_lagpolicy_name: ansible_lag_name
enhanced_lagpolicy_dn: ansible_lag_dn
delimiter: '|'
binding_type: static
num_ports: 2
port_allocation: elastic
netflow_pref: enabled
allow_promiscuous: accept
forged_transmits: accept
mac_changes: accept
custom_epg_name: ansible_custom_epg
state: present
- name: Query a domain associated with a specific site EPG
cisco.mso.mso_schema_site_anp_epg_domain:
host: mso_host
username: admin
password: SomeSecretPassword
schema: Schema1
site: Site1
template: Template1
anp: ANP1
epg: EPG1
domain_association_type: vmmDomain
domain_profile: 'VMware-VMM'
state: query
register: query_result
- name: Query all domains associated with a site EPG
cisco.mso.mso_schema_site_anp_epg_domain:
host: mso_host
username: admin
password: SomeSecretPassword
schema: Schema1
site: Site1
template: Template1
anp: ANP1
epg: EPG1
state: query
register: query_result
- name: Remove a domain from a site EPG
cisco.mso.mso_schema_site_anp_epg_domain:
host: mso_host
username: admin
password: SomeSecretPassword
schema: Schema1
site: Site1
template: Template1
anp: ANP1
epg: EPG1
domain_association_type: vmmDomain
domain_profile: 'VMware-VMM'
deployment_immediacy: lazy
resolution_immediacy: pre-provision
state: absent