cisco.nxos.nxos_bfd_global module – Bidirectional Forwarding Detection (BFD) global-level configuration
Note
This module is part of the cisco.nxos collection (version 8.1.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_bfd_global
.
New in cisco.nxos 1.0.0
Synopsis
Manages Bidirectional Forwarding Detection (BFD) global-level configuration.
Aliases: bfd_global
Parameters
Parameter |
Comments |
---|---|
Loopback interface used for echo frames. Valid values are loopback interface name or ‘deleted’. Not supported on N5K/N6K |
|
BFD Echo receive interval in milliseconds. |
|
BFD fabricpath interval timer values. Value must be a dict defining values for keys (tx, min_rx, and multiplier). |
|
BFD fabricpath slow rate timer in milliseconds. |
|
BFD fabricpath control vlan. |
|
BFD interval timer values. Value must be a dict defining values for keys (tx, min_rx, and multiplier) |
|
BFD IPv4 session echo receive interval in milliseconds. |
|
BFD IPv4 interval timer values. Value must be a dict defining values for keys (tx, min_rx, and multiplier). |
|
BFD IPv4 slow rate timer in milliseconds. |
|
BFD IPv6 session echo receive interval in milliseconds. |
|
BFD IPv6 interval timer values. Value must be a dict defining values for keys (tx, min_rx, and multiplier). |
|
BFD IPv6 slow rate timer in milliseconds. |
|
BFD slow rate timer in milliseconds. |
|
BFD delayed startup timer in seconds. Not supported on N5K/N6K/N7K |
Notes
Note
Tested against NXOSv 9.2(2)
Unsupported for Cisco MDS
BFD global will automatically enable ‘feature bfd’ if it is disabled.
BFD global does not have a ‘state’ parameter. All of the BFD commands are unique and are defined if ‘feature bfd’ is enabled.
For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- cisco.nxos.nxos_bfd_global:
echo_interface: Ethernet1/2
echo_rx_interval: 50
interval:
tx: 50
min_rx: 50
multiplier: 4
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
commands sent to the device Returned: always Sample: |