cisco.nxos.nxos_config module – Manage Cisco NXOS configuration sections
Note
This module is part of the cisco.nxos collection (version 8.1.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_config
.
New in cisco.nxos 1.0.0
Synopsis
Cisco NXOS configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with NXOS configuration sections in a deterministic way. This module works with either CLI or NXAPI transports.
Aliases: config
Parameters
Parameter |
Comments |
---|---|
The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set. |
|
This argument will cause the module to create a full backup of the current Choices:
|
|
This is a dict object containing configurable options related to backup file path. The value of this option is read only when |
|
This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be created and the filename is either the value of |
|
The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time> |
|
The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system. |
|
The defaults argument will influence how the running-config is collected from the device. When the value is set to true, the command used to collect the running-config is append with the all keyword. When the value is set to false, the command is issued without the all keyword Choices:
|
|
When using the When this option is configure as startup, the module will return the diff of the running-config against the startup-config. When this option is configured as intended, the module will return the diff of the running-config against the configuration provided in the When this option is configured as running, the module will return the before and after diff of the running-config with respect to any changes made to the device configuration. Choices:
|
|
Use this argument to specify one or more lines that should be ignored during the diff. This is used for lines in the configuration that are automatically updated by the system. This argument takes a list of regular expressions or exact line matches. |
|
The |
|
The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config to ensure idempotency and correct diff. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. |
|
Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device. Choices:
|
|
The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands. |
|
Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct. replace config will only work for NX-OS versions that support `config replace`. Choices:
|
|
The replace_src argument provides path to the configuration file to load into the remote system. This argument is used to replace the entire config with a flat-file. This is used with argument replace with value config. This is mutually exclusive with the lines and src arguments. This argument will only work for NX-OS versions that support `config replace`. Use nxos_file_copy module to copy the flat file to remote device and then use the path with this argument. The configuration lines in the file should be similar to how it will appear if present in the running-configuration of the device including the indentation to ensure idempotency and correct diff. |
|
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. The configuration lines for this option should be similar to how it will appear if present in the running-configuration of the device including the indentation to ensure idempotency and correct diff. |
|
When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default. Using this argument will change that before. If the argument is set to always, then the running-config will always be copied to the startup-config and the modified flag will always be set to True. If the argument is set to modified, then the running-config will only be copied to the startup-config if it has changed since the last save to startup-config. If the argument is set to never, the running-config will never be copied to the startup-config. If the argument is set to changed, then the running-config will only be copied to the startup-config if the task has made a change. changed was added in Ansible 2.6. Choices:
|
|
The src argument provides a path to the configuration file to load into the remote system. The path can either be a full system path to the configuration file if the value starts with / or relative to the root of the implemented role or playbook. This argument is mutually exclusive with the lines and parents arguments. The configuration lines in the source file should be similar to how it will appear if present in the running-configuration of the device including indentation to ensure idempotency and correct diff. |
Notes
Note
Unsupported for Cisco MDS
Abbreviated commands are NOT idempotent, see https://docs.ansible.com/ansible/latest/network/user_guide/faq.html#why-do-the-config-modules-always-return-changed-true-with-abbreviated-commands.
To ensure idempotency and correct diff the configuration lines in the relevant module options should be similar to how they appear if present in the running configuration on device including the indentation.
For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- name: configure top level configuration and save it
cisco.nxos.nxos_config:
lines: hostname {{ inventory_hostname }}
save_when: modified
- name: diff the running-config against a provided config
cisco.nxos.nxos_config:
diff_against: intended
intended_config: "{{ lookup('file', 'master.cfg') }}"
- cisco.nxos.nxos_config:
lines:
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
before: no ip access-list test
match: exact
- cisco.nxos.nxos_config:
lines:
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
replace: block
- name: replace config with flat file
cisco.nxos.nxos_config:
replace_src: config.txt
replace: config
- name: for idempotency, use full-form commands
cisco.nxos.nxos_config:
lines:
# - shut
- shutdown
# parents: int eth1/1
parents: interface Ethernet1/1
- name: configurable backup path
cisco.nxos.nxos_config:
backup: true
backup_options:
filename: backup.cfg
dir_path: /home/user
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The full path to the backup file Returned: when backup is yes Sample: |
|
The set of commands that will be pushed to the remote device Returned: always Sample: |
|
The date extracted from the backup file name Returned: when backup is yes Sample: |
|
The name of the backup file Returned: when backup is yes and filename is not specified in backup options Sample: |
|
The full path to the backup file excluding the timestamp Returned: when backup is yes and filename is not specified in backup options Sample: |
|
The time extracted from the backup file name Returned: when backup is yes Sample: |
|
The set of commands that will be pushed to the remote device Returned: always Sample: |