cisco.nxos.nxos_snmp_host module – (deprecated, removed after 2024-01-01) Manages SNMP host configuration.
Note
This module is part of the cisco.nxos collection (version 8.1.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_snmp_host
.
New in cisco.nxos 1.0.0
DEPRECATED
- Removed in:
major release after 2024-01-01
- Why:
Updated modules released with more functionality
- Alternative:
nxos_snmp_server
Synopsis
Manages SNMP host configuration parameters.
Aliases: snmp_host
Parameters
Parameter |
Comments |
---|---|
Community string or v3 username. |
|
IP address of hostname of target host. |
|
type of message to send to host. If this is not specified, trap type is used. Choices:
|
|
Source interface. Must be fully qualified interface name. If state = absent, the interface is removed. |
|
Manage the state of the resource. If state = present, the host is added to the configuration. If only vrf and/or vrf_filter and/or src_intf are given, they will be added to the existing host configuration. If state = absent, the host is removed if community parameter is given. It is possible to remove only vrf and/or src_int and/or vrf_filter by providing only those parameters and no community parameter. Choices:
|
|
UDP port number (0-65535). Default: |
|
Use this when verion is v3. SNMPv3 Security level. Choices:
|
|
SNMP version. If this is not specified, v1 is used. Choices:
|
|
VRF to use to source traffic to source. If state = absent, the vrf is removed. |
|
Name of VRF to filter. If state = absent, the vrf is removed from the filter. |
Notes
Note
Tested against NXOSv 7.3.(0)D1(1) on VIRL
Limited Support for Cisco MDS
state=absent
removes the host configuration if it is configured.For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
# ensure snmp host is configured
- cisco.nxos.nxos_snmp_host:
snmp_host: 192.0.2.3
community: TESTING
state: present
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
commands sent to the device Returned: always Sample: |
Status
This module will be removed in a major release after 2024-01-01. [deprecated]
For more information see DEPRECATED.