cisco.nxos.nxos_telemetry module – TELEMETRY resource module

Note

This module is part of the cisco.nxos collection (version 9.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_telemetry.

New in cisco.nxos 1.0.0

Synopsis 

Manages Telemetry Monitoring Service (TMS) configuration

Parameters 

Parameter	Comments
config dictionary	The provided configuration
certificate dictionary	Certificate SSL/TLS and hostname values. Value must be a dict defining values for keys (key and hostname).
hostname string	Certificate hostname
key string	Certificate key
compression string	Destination profile compression method. Choices: `"gzip"`
destination_groups list / elements=any	List of telemetry destination groups.
destination dictionary	Group destination ipv4, port, protocol and encoding values. Value must be a dict defining values for keys (ip, port, protocol, encoding).
encoding string	Destination group encoding. Choices: `"GPB"` `"JSON"`
ip string	Destination group IP address.
port integer	Destination group port number.
protocol string	Destination group protocol. Choices: `"HTTP"` `"TCP"` `"UDP"` `"gRPC"`
id string	Destination group identifier. Value must be an integer or string representing the destination group identifier.
sensor_groups list / elements=any	List of telemetry sensor groups.
data_source string	Telemetry data source. Choices: `"NX-API"` `"DME"` `"YANG"`
id string	Sensor group identifier. Value must be a integer or a string representing the sensor group identifier.
path dictionary	Telemetry sensor path. Value must be a dict defining values for keys (name, depth, filter_condition, query_condition). Mandatory Keys (name) Optional Keys (depth, filter_condition, query_condition)
depth string	Sensor group depth.
filter_condition string	Sensor group filter condition.
name string	Sensor group path name.
query_condition string	Sensor group query condition.
source_interface string	Destination profile source interface. Valid value is a str representing the source interface name.
subscriptions list / elements=any	List of telemetry subscriptions.
destination_group string	Associated destination group.
id string	Subscription identifier. Value must be an integer or string representing the subscription identifier.
sensor_group dictionary	Associated sensor group. Value must be a dict defining values for keys (id, sample_interval).
id string	Associated sensor group id.
sample_interval integer	Associated sensor group id sample interval.
vrf string	Destination profile vrf. Valid value is a str representing the vrf name.
state string	Final configuration state Choices: `"merged"` ← (default) `"replaced"` `"deleted"` `"gathered"`

Notes 

Note

Supported on N9k Version 7.0(3)I7(5) and later.
Unsupported for Cisco MDS

Examples 

# Using deleted
# This action will delete all telemetry configuration on the device

- name: Delete Telemetry Configuration
  cisco.nxos.nxos_telemetry:
    state: deleted


# Using merged
# This action will merge telemetry configuration defined in the playbook with
# telemetry configuration that is already on the device.

- name: Merge Telemetry Configuration
  cisco.nxos.nxos_telemetry:
    config:
      certificate:
        key: /bootflash/server.key
        hostname: localhost
      compression: gzip
      source_interface: Ethernet1/1
      vrf: management
      destination_groups:
        - id: 2
          destination:
            ip: 192.168.0.2
            port: 50001
            protocol: gRPC
            encoding: GPB
        - id: 55
          destination:
            ip: 192.168.0.55
            port: 60001
            protocol: gRPC
            encoding: GPB
      sensor_groups:
        - id: 1
          data_source: NX-API
          path:
            name: '"show lldp neighbors detail"'
            depth: 0
        - id: 55
          data_source: DME
          path:
            name: sys/ch
            depth: unbounded
            filter_condition: ne(eqptFt.operSt,"ok")
      subscriptions:
        - id: 5
          destination_group: 55
          sensor_group:
            id: 1
            sample_interval: 1000
        - id: 6
          destination_group: 2
          sensor_group:
            id: 55
            sample_interval: 2000
    state: merged


# Using replaced
# This action will replace telemetry configuration on the device with the
# telemetry configuration defined in the playbook.

- name: Override Telemetry Configuration
  cisco.nxos.nxos_telemetry:
    config:
      certificate:
        key: /bootflash/server.key
        hostname: localhost
      compression: gzip
      source_interface: Ethernet1/1
      vrf: management
      destination_groups:
        - id: 2
          destination:
            ip: 192.168.0.2
            port: 50001
            protocol: gRPC
            encoding: GPB
      subscriptions:
        - id: 5
          destination_group: 55
    state: replaced

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The configuration as structured data after module completion. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration as structured data prior to module invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["command 1", "command 2", "command 3"]`

Authors

Mike Wiebe (@mikewiebe)

cisco.nxos.nxos_telemetry module – TELEMETRY resource module

Synopsis

Parameters

Notes

Examples

Return Values