Documentation

pn_vrouterif – CLI command to add/remove/modify vrouter-interface.

New in version 2.2.

Synopsis

  • Execute vrouter-interface-add, vrouter-interface-remove, vrouter-interface-modify command.
  • You configure interfaces to vRouter services on a fabric, cluster, standalone switch or virtual network(VNET).

Parameters

Parameter Choices/Defaults Comments
pn_alias
-
Specify an alias for the interface.
pn_assignment
-
    Choices:
  • none
  • dhcp
  • dhcpv6
  • autov6
Specify the DHCP method for IP address assignment.
pn_clipassword
-
Provide login password if user is not root.
pn_cliswitch
-
Target switch to run the cli on.
pn_cliusername
-
Provide login username if user is not root.
pn_exclusive
-
Specify if the interface is exclusive to the configuration. Exclusive means that other configurations cannot use the interface. Exclusive is specified when you configure the interface as span interface and allows higher throughput through the interface.
pn_interface
-
    Choices:
  • mgmt
  • data
  • span
Specify if the interface is management, data or span interface.
pn_interface_ip
-
Specify the IP address of the interface in x.x.x.x/n format.
pn_l3port
-
Specify a Layer 3 port for the interface.
pn_nic_enable
-
Specify if the NIC is enabled or not
pn_nic_str
-
Specify the type of NIC. Used for vrouter-interface remove/modify.
pn_secondary_macs
-
Specify a secondary MAC address for the interface.
pn_vlan
-
Specify the VLAN identifier. This is a value between 1 and 4092.
pn_vrouter_name
- / required
Specify the name of the vRouter interface.
pn_vrrp_adv_int
-
Specify a VRRP advertisement interval in milliseconds. The range is from 30 to 40950 with a default value of 1000.
pn_vrrp_id
-
Specify the ID for the VRRP interface. The IDs on both vRouters must be the same IS number.
pn_vrrp_priority
-
Specify the priority for the VRRP interface. This is a value between 1 (lowest) and 255 (highest).
pn_vxlan
-
Specify the VXLAN identifier. This is a value between 1 and 16777215.
state
- / required
    Choices:
  • present
  • absent
  • update
State the action to perform. Use 'present' to add vrouter interface, 'absent' to remove vrouter interface and 'update' to modify vrouter interface.

Examples

- name: Add vrouter-interface
  pn_vrouterif:
    pn_cliusername: admin
    pn_clipassword: admin
    state: 'present'
    pn_vrouter_name: 'ansible-vrouter'
    pn_interface_ip: 101.101.101.2/24
    pn_vlan: 101

- name: Add VRRP..
  pn_vrouterif:
    pn_cliusername: admin
    pn_clipassword: admin
    state: 'present'
    pn_vrouter_name: 'ansible-vrouter'
    pn_interface_ip: 101.101.101.2/24
    pn_vrrp_ip: 101.101.101.1/24
    pn_vrrp_priority: 100
    pn_vlan: 101

- name: Remove vrouter-interface
  pn_vrouterif:
    pn_cliusername: admin
    pn_clipassword: admin
    state: 'absent'
    pn_vrouter_name: 'ansible-vrouter'
    pn_interface_ip: 101.101.101.2/24

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Indicates whether the CLI caused changes on the target.

command
string
always
The CLI command run on the target node(s).

stderr
string
on error
The set of error responses from the vrouterif command.

stdout
list
on success
The set of responses from the vrouterif command.



Status

Authors

  • Pluribus Networks (@amitsi)

Hint

If you notice any issues in this documentation you can edit this document to improve it.