New in version 1.4.
parameter | required | default | choices | comments |
---|---|---|---|---|
description |
no |
Node description.
|
||
host |
yes |
Node IP. Required when state=present and node does not exist. Error when state=absent.
aliases: address, ip
|
||
monitor_state (added in 1.9) |
no |
|
Set monitor availability status for node
|
|
monitor_type (added in 2.2) |
no |
|
Monitor rule type when monitors > 1
|
|
monitors (added in 2.2) |
no |
Monitor template name list. Always use the full path to the monitor.
|
||
name |
no |
Node name
|
||
partition |
no | Common |
Partition
|
|
password |
yes |
The password for the user account used to connect to the BIG-IP. This option can be omitted if the environment variable
F5_PASSWORD is set. |
||
quorum (added in 2.2) |
no |
Monitor quorum value when monitor_type is m_of_n
|
||
server |
yes |
The BIG-IP host. This option can be omitted if the environment variable
F5_SERVER is set. |
||
server_port (added in 2.2) |
no | 443 |
The BIG-IP server port. This option can be omitted if the environment variable
F5_SERVER_PORT is set. |
|
session_state (added in 1.9) |
no |
|
Set new session availability status for node
|
|
state |
yes | present |
|
Pool member state
|
user |
yes |
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. This option can be omitted if the environment variable
F5_USER is set. |
||
validate_certs (added in 2.0) |
no | True |
|
If
no , SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. This option can be omitted if the environment variable F5_VALIDATE_CERTS is set. |
- name: Add node bigip_node: server: "lb.mydomain.com" user: "admin" password: "secret" state: "present" partition: "Common" host: "10.20.30.40" name: "10.20.30.40" # Note that the BIG-IP automatically names the node using the # IP address specified in previous play's host parameter. # Future plays referencing this node no longer use the host # parameter but instead use the name parameter. # Alternatively, you could have specified a name with the # name parameter when state=present. - name: Add node with a single 'ping' monitor bigip_node: server: "lb.mydomain.com" user: "admin" password: "secret" state: "present" partition: "Common" host: "10.20.30.40" name: "mytestserver" monitors: - /Common/icmp delegate_to: localhost - name: Modify node description bigip_node: server: "lb.mydomain.com" user: "admin" password: "secret" state: "present" partition: "Common" name: "10.20.30.40" description: "Our best server yet" delegate_to: localhost - name: Delete node bigip_node: server: "lb.mydomain.com" user: "admin" password: "secret" state: "absent" partition: "Common" name: "10.20.30.40" # The BIG-IP GUI doesn't map directly to the API calls for "Node -> # General Properties -> State". The following states map to API monitor # and session states. # # Enabled (all traffic allowed): # monitor_state=enabled, session_state=enabled # Disabled (only persistent or active connections allowed): # monitor_state=enabled, session_state=disabled # Forced offline (only active connections allowed): # monitor_state=disabled, session_state=disabled # # See https://devcentral.f5.com/questions/icontrol-equivalent-call-for-b-node-down - name: Force node offline bigip_node: server: "lb.mydomain.com" user: "admin" password: "mysecret" state: "present" session_state: "disabled" monitor_state: "disabled" partition: "Common" name: "10.20.30.40"
Note
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.