New in version 2.4.
parameter | required | default | choices | comments |
---|---|---|---|---|
enable |
no |
|
Set interface DLDP enable state.
|
|
interface |
yes |
Must be fully qualified interface name, i.e. GE1/0/1, 10GE1/0/1, 40GE1/0/22, 100GE1/0/1.
|
||
local_mac |
no |
Set the source MAC address for DLDP packets sent in the DLDP-compatible mode. The value of MAC address is in H-H-H format. H contains 1 to 4 hexadecimal digits.
|
||
mode_enable |
no |
|
Set DLDP compatible-mode enable state.
|
|
reset |
no |
|
Specify whether reseting interface DLDP state.
|
|
state |
no | present |
|
Manage the state of the resource.
|
- name: DLDP interface test hosts: cloudengine connection: local gather_facts: no vars: cli: host: "{{ inventory_hostname }}" port: "{{ ansible_ssh_port }}" username: "{{ username }}" password: "{{ password }}" transport: cli tasks: - name: "Configure interface DLDP enable state and ensure global dldp enable is turned on" ce_dldp_interface: interface: 40GE2/0/1 enable: enable provider: "{{ cli }}" - name: "Configuire interface DLDP compatible-mode enable state and ensure interface DLDP state is already enabled" ce_dldp_interface: interface: 40GE2/0/1 enable: enable mode_enable: enable provider: "{{ cli }}" - name: "Configuire the source MAC address for DLDP packets sent in the DLDP-compatible mode and ensure interface DLDP state and compatible-mode enable state is already enabled" ce_dldp_interface: interface: 40GE2/0/1 enable: enable mode_enable: enable local_mac: aa-aa-aa provider: "{{ cli }}" - name: "Reset DLDP state of specified interface and ensure interface DLDP state is already enabled" ce_dldp_interface: interface: 40GE2/0/1 enable: enable reset: enable provider: "{{ cli }}" - name: "Unconfigure interface DLDP local mac addreess when C(state=absent)" ce_dldp_interface: interface: 40GE2/0/1 state: absent local_mac: aa-aa-aa provider: "{{ cli }}"
Common return values are documented here Return Values, the following are the fields unique to this module:
name | description | returned | type | sample |
---|---|---|---|---|
changed |
check to see if a change was made on the device
|
always | boolean | True |
end_state |
k/v pairs of interface DLDP configration after module execution
|
always | dict | {'interface': '40GE2/0/22', 'reset': 'enable', 'mode_enable': 'enable', 'enable': 'enable', 'local_mac': '00aa-00aa-00aa'} |
existing |
k/v pairs of existing interface DLDP configration
|
always | dict | {'interface': '40GE2/0/22', 'reset': 'disable', 'mode_enable': None, 'enable': 'disable', 'local_mac': None} |
proposed |
k/v pairs of parameters passed into module
|
always | dict | {'interface': '40GE2/0/22', 'reset': 'enable', 'mode_enable': 'enable', 'enable': 'enalbe', 'local_mac': 'aa-aa-aa'} |
updates |
command sent to the device
|
always | list | ['dldp enable', 'dldp compatible-mode enable', 'dldp compatible-mode local-mac aa-aa-aa', 'dldp reset'] |
Note
state=present, enable=disable
, interface DLDP enable will be turned off and related interface DLDP confuration will be cleared.state=absent
, only local_mac is supported to configure.This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.