community.network.ce_bgp_neighbor module – Manages BGP peer configuration on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 5.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_bgp_neighbor.

Synopsis

  • Manages BGP peer configurations on HUAWEI CloudEngine switches.

Aliases: network.cloudengine.ce_bgp_neighbor

Parameters

Parameter

Comments

conn_retry_time

string

ConnectRetry interval. The value is an integer ranging from 1 to 65535.

connect_mode

string

The value can be Connect-only, Listen-only, or Both.

conventional

string

If the value is true, the router has all extended capabilities. If the value is false, the router does not have all extended capabilities.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

description

string

Description of a peer, which can be letters or digits. The value is a string of 1 to 80 characters.

dual_as

string

If the value is true, the EBGP peer can use either a fake AS number or the actual AS number. If the value is false, the EBGP peer can only use a fake AS number.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

ebgp_max_hop

string

Maximum number of hops in an indirect EBGP connection. The value is an ranging from 1 to 255.

fake_as

string

Fake AS number that is specified for a local peer. The value is a string of 1 to 11 characters.

hold_time

string

Specify the Hold time of a peer or peer group. The value is 0 or an integer ranging from 3 to 65535.

is_bfd_block

string

If the value is true, peers are enabled to inherit the BFD function from the peer group. If the value is false, peers are disabled to inherit the BFD function from the peer group.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

is_bfd_enable

string

If the value is true, BFD is enabled. If the value is false, BFD is disabled.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

is_ignore

string

If the value is true, the session with a specified peer is torn down and all related routing entries are cleared. If the value is false, the session with a specified peer is retained.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

is_log_change

string

If the value is true, BGP is enabled to record peer session status and event information. If the value is false, BGP is disabled from recording peer session status and event information.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

is_single_hop

string

If the value is true, the system is enabled to preferentially use the single-hop mode for BFD session setup between IBGP peers. If the value is false, the system is disabled from preferentially using the single-hop mode for BFD session setup between IBGP peers.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

keep_alive_time

string

Specify the Keepalive time of a peer or peer group. The value is an integer ranging from 0 to 21845. The default value is 60.

key_chain_name

string

Specify the Keychain authentication name used when BGP peers establish a TCP connection. The value is a string of 1 to 47 case-insensitive characters.

local_if_name

string

Name of a source interface that sends BGP packets. The value is a string of 1 to 63 characters.

min_hold_time

string

Specify the Min hold time of a peer or peer group.

mpls_local_ifnet_disable

string

If the value is true, peer create MPLS Local IFNET disable. If the value is false, peer create MPLS Local IFNET enable.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

multiplier

string

Specify the detection multiplier. The default value is 3. The value is an integer ranging from 3 to 50.

peer_addr

string / required

Connection address of a peer, which can be an IPv4 or IPv6 address.

prepend_fake_as

string

Add the Fake AS number to received Update packets.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

prepend_global_as

string

Add the global AS number to the Update packets to be advertised.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

pswd_cipher_text

string

The character string in a password identifies the contents of the password, spaces not supported. The value is a string of 1 to 255 characters.

pswd_type

string

Enable BGP peers to establish a TCP connection and perform the Message Digest 5 (MD5) authentication for BGP messages.

Choices:

  • "null"

  • "cipher"

  • "simple"

remote_as

string / required

AS number of a peer. The value is a string of 1 to 11 characters.

route_refresh

string

If the value is true, BGP is enabled to advertise REFRESH packets. If the value is false, the route refresh function is enabled.

Choices:

  • "no_use" ← (default)

  • "true"

  • "false"

rx_interval

string

Specify the minimum interval at which BFD packets are received. The value is an integer ranging from 50 to 1000, in milliseconds.

state

string

Specify desired state of the resource.

Choices:

  • "present" ← (default)

  • "absent"

tcp_MSS

string

Maximum TCP MSS value used for TCP connection establishment for a peer. The value is an integer ranging from 176 to 4096.

tx_interval

string

Specify the minimum interval at which BFD packets are sent. The value is an integer ranging from 50 to 1000, in milliseconds.

valid_ttl_hops

string

Enable GTSM on a peer or peer group. The valid-TTL-Value parameter is used to specify the number of TTL hops to be detected. The value is an integer ranging from 1 to 255.

vrf_name

string / required

Name of a BGP instance. The name is a case-sensitive string of characters. The BGP instance can be used only after the corresponding VPN instance is created.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: CloudEngine BGP neighbor test
  hosts: cloudengine
  connection: local
  gather_facts: false
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Config bgp peer"
    community.network.ce_bgp_neighbor:
      state: present
      vrf_name: js
      peer_addr: 192.168.10.10
      remote_as: 500
      provider: "{{ cli }}"

  - name: "Config bgp route id"
    community.network.ce_bgp_neighbor:
      state: absent
      vrf_name: js
      peer_addr: 192.168.10.10
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of aaa params after module execution

Returned: always

Sample: {"bgp peer": [["192.168.10.10", "500"]]}

existing

dictionary

k/v pairs of existing aaa server

Returned: always

Sample: {"bgp peer": []}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {"peer_addr": "192.168.10.10", "remote_as": "500", "state": "present", "vrf_name": "js"}

updates

list / elements=string

command sent to the device

Returned: always

Sample: ["peer 192.168.10.10 as-number 500"]

Authors

  • wangdezhuang (@QijunPan)