efs – create and maintain EFS file systems¶

New in version 2.2.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Module allows create, search and destroy Amazon EFS file systems

Requirements ¶

The below requirements are needed on the host that executes this module.

boto
boto3
python >= 2.6

Parameters ¶

Parameter	Choices/Defaults	Comments
aws_access_key -		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key
aws_secret_key -		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key
ec2_url -		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
encrypt boolean added in 2.5	Choices: no ← yes	A boolean value that, if true, creates an encrypted file system. This can not be modfied after the file system is created.
id -		ID of Amazon EFS. Either name or ID required for delete.
kms_key_id - added in 2.5		The id of the AWS KMS CMK that will be used to protect the encrypted file system. This parameter is only required if you want to use a non-default CMK. If this parameter is not specified, the default CMK for Amazon EFS is used. The key id can be Key ID, Key ID ARN, Key Alias or Key Alias ARN.
name -		Creation Token of Amazon EFS file system. Required for create and update. Either name or ID required for delete.
performance_mode -	Choices: general_purpose ← max_io	File system's performance mode to use. Only takes effect during creation.
profile - added in 1.6		Uses a boto profile. Only works with boto >= 2.24.0.
purge_tags boolean added in 2.5	Choices: no yes ←	If yes, existing tags will be purged from the resource to match exactly what is defined by tags parameter. If the tags parameter is not set then tags will not be modified.
region -		The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
security_token - added in 1.6		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token
state -	Choices: present ← absent	Allows to create, search and destroy Amazon EFS file system
tags -		List of tags of Amazon EFS. Should be defined as dictionary In case of 'present' state with list of tags and existing EFS (matched by 'name'), tags of EFS will be replaced with provided data.
targets -		List of mounted targets. It should be a list of dictionaries, every dictionary should include next attributes: - subnet_id - Mandatory. The ID of the subnet to add the mount target in. - ip_address - Optional. A valid IPv4 address within the address range of the specified subnet. - security_groups - Optional. List of security group IDs, of the form 'sg-xxxxxxxx'. These must be for the same VPC as subnet specified This data may be modified for existing EFS using state 'present' and new list of mount targets.
validate_certs boolean added in 1.5	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
wait boolean	Choices: no ← yes	In case of 'present' state should wait for EFS 'available' life cycle state (of course, if current state not 'deleting' or 'deleted') In case of 'absent' state should wait for EFS 'deleted' life cycle state
wait_timeout -	Default: 0	How long the module should wait (in seconds) for desired state before returning. Zero means wait as long as necessary.

Notes ¶

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# EFS provisioning
- efs:
    state: present
    name: myTestEFS
    tags:
        name: myTestNameTag
        purpose: file-storage
    targets:
        - subnet_id: subnet-748c5d03
          security_groups: [ "sg-1a2b3c4d" ]

# Modifying EFS data
- efs:
    state: present
    name: myTestEFS
    tags:
        name: myAnotherTestTag
    targets:
        - subnet_id: subnet-7654fdca
          security_groups: [ "sg-4c5d6f7a" ]

# Deleting EFS
- efs:
    state: absent
    name: myTestEFS

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
creation_time string	always	timestamp of creation date Sample: 2015-11-16 07:30:57-05:00
creation_token string	always	EFS creation token Sample: console-88609e04-9a0e-4a2e-912c-feaa99509961
file_system_id string	always	ID of the file system Sample: fs-xxxxxxxx
filesystem_address string	always	url of file system valid for use with mount Sample: fs-xxxxxxxx.efs.us-west-2.amazonaws.com:/
life_cycle_state string	always	state of the EFS file system Sample: creating, available, deleting, deleted
mount_point string	always	url of file system with leading dot from the time when AWS EFS required to add a region suffix to the address Sample: .fs-xxxxxxxx.efs.us-west-2.amazonaws.com:/
mount_targets list	always	list of mount targets Sample: [{'file_system_id': 'fs-a7ad440e', 'ip_address': '172.31.17.173', 'life_cycle_state': 'available', 'mount_target_id': 'fsmt-d8907871', 'network_interface_id': 'eni-6e387e26', 'owner_id': '740748460359', 'security_groups': ['sg-a30b22c6'], 'subnet_id': 'subnet-e265c895'}, '...']
name string	always	name of the file system Sample: my-efs
number_of_mount_targets integer	always	the number of targets mounted Sample: 3
owner_id string	always	AWS account ID of EFS owner Sample: XXXXXXXXXXXX
performance_mode string	always	performance mode of the file system Sample: generalPurpose
size_in_bytes dictionary	always	size of the file system in bytes as of a timestamp Sample: {'timestamp': '2015-12-21 13:59:59-05:00', 'value': 12288}
tags dictionary	always	tags on the efs instance Sample: {'name': 'my-efs', 'key': 'Value'}

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Ryan Sydnor (@ryansydnor)
Artem Kazakov (@akazakov)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

efs – create and maintain EFS file systems¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶