elb_target_facts – Gathers which target groups a target is associated with.¶

New in version 2.7.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

This module will search through every target group in a region to find which ones have registered a given instance ID or IP.

Requirements ¶

The below requirements are needed on the host that executes this module.

boto
boto3
botocore
python >= 2.6

Parameters ¶

Parameter	Choices/Defaults	Comments
aws_access_key -		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key
aws_secret_key -		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key
ec2_url -		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
get_unused_target_groups boolean	Choices: no yes ←	Whether or not to get target groups not used by any load balancers.
instance_id string / required		What instance ID to get facts for.
profile - added in 1.6		Uses a boto profile. Only works with boto >= 2.24.0.
region -		The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
security_token - added in 1.6		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token
validate_certs boolean added in 1.5	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.

Notes ¶

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# practical use case - dynamically deregistering and reregistering nodes

  - name: Get EC2 Metadata
    action: ec2_metadata_facts

  - name: Get initial list of target groups
    delegate_to: localhost
    elb_target_facts:
      instance_id: "{{ ansible_ec2_instance_id }}"
      region: "{{ ansible_ec2_placement_region }}"
    register: target_facts

  - name: save fact for later
    set_fact:
      original_tgs: "{{ target_facts.instance_target_groups }}"

  - name: Deregister instance from all target groups
    delegate_to: localhost
    elb_target:
        target_group_arn: "{{ item.0.target_group_arn }}"
        target_port: "{{ item.1.target_port }}"
        target_az: "{{ item.1.target_az }}"
        target_id: "{{ item.1.target_id }}"
        state: absent
        target_status: "draining"
        region: "{{ ansible_ec2_placement_region }}"
    with_subelements:
      - "{{ original_tgs }}"
      - "targets"

    # This avoids having to wait for 'elb_target' to serially deregister each
    # target group.  An alternative would be to run all of the 'elb_target'
    # tasks async and wait for them to finish.

  - name: wait for all targets to deregister simultaneously
    delegate_to: localhost
    elb_target_facts:
      get_unused_target_groups: false
      instance_id: "{{ ansible_ec2_instance_id }}"
      region: "{{ ansible_ec2_placement_region }}"
    register: target_facts
    until: (target_facts.instance_target_groups | length) == 0
    retries: 60
    delay: 10

  - name: reregister in elbv2s
    elb_target:
      region: "{{ ansible_ec2_placement_region }}"
      target_group_arn: "{{ item.0.target_group_arn }}"
      target_port: "{{ item.1.target_port }}"
      target_az: "{{ item.1.target_az }}"
      target_id: "{{ item.1.target_id }}"
      state: present
      target_status: "initial"
    with_subelements:
      - "{{ original_tgs }}"
      - "targets"

  # wait until all groups associated with this instance are 'healthy' or
  # 'unused'
  - name: wait for registration
    elb_target_facts:
      get_unused_target_groups: false
      instance_id: "{{ ansible_ec2_instance_id }}"
      region: "{{ ansible_ec2_placement_region }}"
    register: target_facts
    until: (target_facts.instance_target_groups |
            map(attribute='targets') |
            flatten |
            map(attribute='target_health') |
            rejectattr('state', 'equalto', 'healthy') |
            rejectattr('state', 'equalto', 'unused') |
            list |
            length) == 0
    retries: 61
    delay: 10

# using the target groups to generate AWS CLI commands to reregister the
# instance - useful in case the playbook fails mid-run and manual
#            rollback is required
  - name: "reregistration commands: ELBv2s"
    debug:
      msg: >
             aws --region {{ansible_ec2_placement_region}} elbv2
             register-targets --target-group-arn {{item.target_group_arn}}
             --targets{%for target in item.targets%}
             Id={{target.target_id}},
             Port={{target.target_port}}{%if target.target_az%},AvailabilityZone={{target.target_az}}
             {%endif%}
             {%endfor%}
    with_items: "{{target_facts.instance_target_groups}}"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key				Returned	Description
instance_target_groups complex				always	a list of target groups to which the instance is registered to
	target_group_arn string			always	The ARN of the target group Sample: ['arn:aws:elasticloadbalancing:eu-west-1:111111111111:targetgroup/target-group/deadbeefdeadbeef']
	target_group_type string			always	Which target type is used for this group Sample: ['ip', 'instance']
	targets complex			always	A list of targets that point to this instance ID
		target_az string		when an AZ is associated with this instance	which availability zone is explicitly associated with this target Sample: ['us-west-2a']
		target_health complex		always	the target health description (see https://boto3.readthedocs.io/en/latest/ reference/services/elbv2.html#ElasticLoadBalancingv2.Client.describe_target_health) for all possible values
			description -	if state!=present	description of target health Sample: ['Target desregistration is in progress']
			reason -	if state!=healthy	reason code for target health Sample: ['Target.Deregistration in progress']
			state -	always	health state Sample: ['healthy', 'draining', 'initial', 'unhealthy', 'unused', 'unavailable']
		target_id string		always	the target ID referiing to this instance Sample: ['i-deadbeef', '1.2.3.4']
		target_port string		always	which port this target is listening on Sample: [80]

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

Yaakov Kuperman (@yaakov-github)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

elb_target_facts – Gathers which target groups a target is associated with.¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶