pn_vrouterbgp – CLI command to add/remove/modify vrouter-bgp.

New in version 2.2.

Synopsis

  • Execute vrouter-bgp-add, vrouter-bgp-remove, vrouter-bgp-modify command.
  • Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a vRouter service that forwards traffic between networks and implements Layer 4 protocols.

Parameters

Parameter Choices/Defaults Comments
pn_bfd
-
Specify if you want BFD protocol support for fault detection.
pn_clipassword
-
Provide login password if user is not root.
pn_cliswitch
-
Target switch(es) to run the cli on.
pn_cliusername
-
Provide login username if user is not root.
pn_default_originate
-
Specify if you want announce default routes to the neighbor or not.
pn_ebgp
-
Specify a value for external BGP to accept or attempt BGP connections to external peers, not directly connected, on the network. This is a value between 1 and 255.
pn_holdtime
-
Specify BGP neighbor holdtime in seconds.
pn_keepalive
-
Specify BGP neighbor keepalive interval in seconds.
pn_max_prefix
-
Specify the maximum number of prefixes.
pn_max_prefix_warn
-
Specify if you want a warning message when the maximum number of prefixes is exceeded.
pn_multiprotocol
-
    Choices:
  • ipv4-unicast
  • ipv6-unicast
Specify a multi-protocol for BGP.
pn_neighbor
-
Specify a neighbor IP address to use for BGP.
Required for vrouter-bgp-add.
pn_next_hop_self
-
Specify if the next-hop is the same router or not.
pn_override_capability
-
Specify if you want to override capability.
pn_password
-
Specify a password, if desired.
pn_prefix_listin
-
Specify the prefix list to filter traffic inbound.
pn_prefix_listout
-
Specify the prefix list to filter traffic outbound.
pn_remote_as
-
Specify the remote Autonomous System(AS) number. This value is between 1 and 4294967295.
Required for vrouter-bgp-add.
pn_route_mapin
-
Specify inbound route map for neighbor.
pn_route_mapout
-
Specify outbound route map for neighbor.
pn_route_reflector
-
Specify if a route reflector client is used.
pn_soft_reconfig
-
Specify if you want a soft reconfiguration of inbound traffic.
pn_vrouter_name
- / required
Specify a name for the vRouter service.
pn_weight
-
Specify a default weight value between 0 and 65535 for the neighbor routes.
state
- / required
    Choices:
  • present
  • absent
  • update
State the action to perform. Use 'present' to add bgp, 'absent' to remove bgp and 'update' to modify bgp.

Examples

- name: add vrouter-bgp
  pn_vrouterbgp:
    state: 'present'
    pn_vrouter_name: 'ansible-vrouter'
    pn_neighbor: 104.104.104.1
    pn_remote_as: 1800

- name: remove vrouter-bgp
  pn_vrouterbgp:
    state: 'absent'
    pn_name: 'ansible-vrouter'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Indicates whether the CLI caused changes on the target.

command
string
always
The CLI command run on the target node(s).

stderr
list
on error
The set of error responses from the vrouterbgp command.

stdout
list
always
The set of responses from the vrouterbpg command.



Status

Authors

  • Pluribus Networks (@amitsi)

Hint

If you notice any issues in this documentation you can edit this document to improve it.