ec2_ami – create or destroy an image in ec2¶

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Registers or deregisters ec2 images.

Requirements ¶

The below requirements are needed on the host that executes this module.

python >= 2.6
boto

Parameters ¶

Parameter	Choices/Defaults	Comments
architecture - added in 2.3		The target architecture of the image to register
aws_access_key string		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key
aws_secret_key string		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key
billing_products - added in 2.5		A list of valid billing codes. To be used with valid accounts by aws marketplace vendors.
debug_botocore_endpoint_logs boolean added in 2.8	Choices: no ← yes	Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.
delete_snapshot boolean	Choices: no ← yes	Delete snapshots when deregistering the AMI.
description -		Human-readable string describing the contents and purpose of the AMI.
device_mapping - added in 2.0		List of device hashes/dictionaries with custom configurations (same block-device-mapping parameters). Valid properties include: device_name, volume_type, size/volume_size (in GiB), delete_on_termination (boolean), no_device (boolean), snapshot_id, iops (for io1 volume_type), encrypted
ec2_url string		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
enhanced_networking boolean added in 2.5	Choices: no yes	A boolean representing whether enhanced networking with ENA is enabled or not.
image_id -		Image ID to be deregistered.
image_location - added in 2.5		The s3 location of an image to use for the AMI.
instance_id -		Instance ID to create the AMI from.
kernel_id - added in 2.3		The target kernel id of the image to register.
launch_permissions - added in 2.0		Users and groups that should be able to launch the AMI. Expects dictionary with a key of user_ids and/or group_names. user_ids should be a list of account ids. group_name should be a list of groups, "all" is the only acceptable value currently. You must pass all desired launch permissions if you wish to modify existing launch permissions (passing just groups will remove all users)
name -		The name of the new AMI.
no_reboot boolean	Choices: no ← yes	Flag indicating that the bundling process should not attempt to shutdown the instance before bundling. If this flag is True, the responsibility of maintaining file system integrity is left to the owner of the instance.
profile string		Uses a boto profile. Only works with boto >= 2.24.0.
purge_tags boolean added in 2.5	Choices: no ← yes	Whether to remove existing tags that aren't passed in the `tags` parameter
ramdisk_id - added in 2.5		The ID of the RAM disk.
region string		The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
root_device_name - added in 2.3		The root device name of the image to register.
security_token string		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token
sriov_net_support - added in 2.5		Set to simple to enable enhanced networking with the Intel 82599 Virtual Function interface for the AMI and any instances that you launch from the AMI.
state -	Choices: absent present ←	Register or deregister an AMI.
tags - added in 2.0		A dictionary of tags to add to the new image; '{"key":"value"}' and '{"key":"value","key":"value"}'
validate_certs boolean	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
virtualization_type - added in 2.3		The virtualization type of the image to register.
wait boolean	Choices: no ← yes	Wait for the AMI to be in state 'available' before returning.
wait_timeout -	Default: 900	How long before wait gives up, in seconds.

Notes ¶

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# Note: These examples do not set authentication details, see the AWS Guide for details.

# Basic AMI Creation
- ec2_ami:
    instance_id: i-xxxxxx
    wait: yes
    name: newtest
    tags:
      Name: newtest
      Service: TestService

# Basic AMI Creation, without waiting
- ec2_ami:
    instance_id: i-xxxxxx
    wait: no
    name: newtest

# AMI Registration from EBS Snapshot
- ec2_ami:
    name: newtest
    state: present
    architecture: x86_64
    virtualization_type: hvm
    root_device_name: /dev/xvda
    device_mapping:
      - device_name: /dev/xvda
        volume_size: 8
        snapshot_id: snap-xxxxxxxx
        delete_on_termination: true
        volume_type: gp2

# AMI Creation, with a custom root-device size and another EBS attached
- ec2_ami:
    instance_id: i-xxxxxx
    name: newtest
    device_mapping:
        - device_name: /dev/sda1
          size: XXX
          delete_on_termination: true
          volume_type: gp2
        - device_name: /dev/sdb
          size: YYY
          delete_on_termination: false
          volume_type: gp2

# AMI Creation, excluding a volume attached at /dev/sdb
- ec2_ami:
    instance_id: i-xxxxxx
    name: newtest
    device_mapping:
        - device_name: /dev/sda1
          size: XXX
          delete_on_termination: true
          volume_type: gp2
        - device_name: /dev/sdb
          no_device: yes

# Deregister/Delete AMI (keep associated snapshots)
- ec2_ami:
    image_id: "{{ instance.image_id }}"
    delete_snapshot: False
    state: absent

# Deregister AMI (delete associated snapshots too)
- ec2_ami:
    image_id: "{{ instance.image_id }}"
    delete_snapshot: True
    state: absent

# Update AMI Launch Permissions, making it public
- ec2_ami:
    image_id: "{{ instance.image_id }}"
    state: present
    launch_permissions:
      group_names: ['all']

# Allow AMI to be launched by another account
- ec2_ami:
    image_id: "{{ instance.image_id }}"
    state: present
    launch_permissions:
      user_ids: ['123456789012']

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
architecture string	when AMI is created or already exists	architecture of image Sample: x86_64
block_device_mapping dictionary	when AMI is created or already exists	block device mapping associated with image Sample: {'/dev/sda1': {'delete_on_termination': True, 'encrypted': False, 'size': 10, 'snapshot_id': 'snap-1a03b80e7', 'volume_type': 'standard'}}
creationDate string	when AMI is created or already exists	creation date of image Sample: 2015-10-15T22:43:44.000Z
description string	when AMI is created or already exists	description of image Sample: nat-server
hypervisor string	when AMI is created or already exists	type of hypervisor Sample: xen
image_id string	when AMI is created or already exists	id of the image Sample: ami-1234abcd
is_public boolean	when AMI is created or already exists	whether image is public
launch_permission list	when AMI is created or already exists	permissions allowing other accounts to access the AMI Sample: [{'group': 'all'}]
location string	when AMI is created or already exists	location of image Sample: 315210894379/nat-server
name string	when AMI is created or already exists	ami name of image Sample: nat-server
ownerId string	when AMI is created or already exists	owner of image Sample: 435210894375
platform string	when AMI is created or already exists	platform of image
root_device_name string	when AMI is created or already exists	root device name of image Sample: /dev/sda1
root_device_type string	when AMI is created or already exists	root device type of image Sample: ebs
snapshots_deleted list	after AMI is deregistered, if 'delete_snapshot' is set to 'yes'	a list of snapshot ids deleted after deregistering image Sample: ['snap-fbcccb8f', 'snap-cfe7cdb4']
state string	when AMI is created or already exists	state of image Sample: available
tags dictionary	when AMI is created or already exists	a dictionary of tags assigned to image Sample: {'Env': 'devel', 'Name': 'nat-server'}
virtualization_type string	when AMI is created or already exists	image virtualization type Sample: hvm

Status ¶

This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
This module is maintained by the Ansible Community. [community]

Authors¶

Evan Duffield (@scicoin-project) <eduffield@iacquire.com>
Constantin Bugneac (@Constantin07) <constantin.bugneac@endava.com>
Ross Williams (@gunzy83) <gunzy83au@gmail.com>
Willem van Ketwich (@wilvk) <willvk@gmail.com>

Hint

If you notice any issues in this documentation you can edit this document to improve it.

ec2_ami – create or destroy an image in ec2¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶