fortios_firewall_proxy_policy – Configure proxy policies in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to configure firewall feature and proxy_policy category. Examples includes all options and need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
firewall_proxy_policy
-
Default:
null
Configure proxy policies.
action
-
    Choices:
  • accept
  • deny
  • redirect
Accept or deny traffic matching the policy parameters.
application-list
-
Name of an existing Application list. Source application.list.name.
av-profile
-
Name of an existing Antivirus profile. Source antivirus.profile.name.
comments
-
Optional comments.
disclaimer
-
    Choices:
  • disable
  • domain
  • policy
  • user
Web proxy disclaimer setting: by domain, policy, or user.
dlp-sensor
-
Name of an existing DLP sensor. Source dlp.sensor.name.
dstaddr
-
Destination address objects.
name
- / required
Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name firewall.vip.name firewall.vipgrp.name firewall.vip46.name firewall.vipgrp46.name system.external-resource.name.
dstaddr-negate
-
    Choices:
  • enable
  • disable
When enabled, destination addresses match against any address EXCEPT the specified destination addresses.
dstaddr6
-
IPv6 destination address objects.
name
- / required
Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name firewall.vip64.name firewall.vipgrp64.name system.external-resource.name.
dstintf
-
Destination interface names.
name
- / required
Interface name. Source system.interface.name system.zone.name.
global-label
-
Global web-based manager visible label.
groups
-
Names of group objects.
name
- / required
Group name. Source user.group.name.
http-tunnel-auth
-
    Choices:
  • enable
  • disable
Enable/disable HTTP tunnel authentication.
icap-profile
-
Name of an existing ICAP profile. Source icap.profile.name.
internet-service
-
    Choices:
  • enable
  • disable
Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.
internet-service-custom
-
Custom Internet Service name.
name
- / required
Custom name. Source firewall.internet-service-custom.name.
internet-service-id
-
Internet Service ID.
id
- / required
Internet Service ID. Source firewall.internet-service.id.
internet-service-negate
-
    Choices:
  • enable
  • disable
When enabled, Internet Services match against any internet service EXCEPT the selected Internet Service.
ips-sensor
-
Name of an existing IPS sensor. Source ips.sensor.name.
label
-
VDOM-specific GUI visible label.
logtraffic
-
    Choices:
  • all
  • utm
  • disable
Enable/disable logging traffic through the policy.
logtraffic-start
-
    Choices:
  • enable
  • disable
Enable/disable policy log traffic start.
policyid
- / required
Policy ID.
poolname
-
Name of IP pool object.
name
- / required
IP pool name. Source firewall.ippool.name.
profile-group
-
Name of profile group. Source firewall.profile-group.name.
profile-protocol-options
-
Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name.
profile-type
-
    Choices:
  • single
  • group
Determine whether the firewall policy allows security profile groups or single profiles only.
proxy
-
    Choices:
  • explicit-web
  • transparent-web
  • ftp
  • ssh
  • ssh-tunnel
  • wanopt
Type of explicit proxy.
redirect-url
-
Redirect URL for further explicit web proxy processing.
replacemsg-override-group
-
Authentication replacement message override group. Source system.replacemsg-group.name.
scan-botnet-connections
-
    Choices:
  • disable
  • block
  • monitor
Enable/disable scanning of connections to Botnet servers.
schedule
-
Name of schedule object. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.
service
-
Name of service objects.
name
- / required
Service name. Source firewall.service.custom.name firewall.service.group.name.
service-negate
-
    Choices:
  • enable
  • disable
When enabled, services match against any service EXCEPT the specified destination services.
session-ttl
-
TTL in seconds for sessions accepted by this policy (0 means use the system default session TTL).
spamfilter-profile
-
Name of an existing Spam filter profile. Source spamfilter.profile.name.
srcaddr
-
Source address objects (must be set when using Web proxy).
name
- / required
Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name system .external-resource.name.
srcaddr-negate
-
    Choices:
  • enable
  • disable
When enabled, source addresses match against any address EXCEPT the specified source addresses.
srcaddr6
-
IPv6 source address objects.
name
- / required
Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.
srcintf
-
Source interface names.
name
- / required
Interface name. Source system.interface.name system.zone.name.
ssh-filter-profile
-
Name of an existing SSH filter profile. Source ssh-filter.profile.name.
ssl-ssh-profile
-
Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name.
state
-
    Choices:
  • present
  • absent
Indicates whether to create or remove the object
status
-
    Choices:
  • enable
  • disable
Enable/disable the active status of the policy.
transparent
-
    Choices:
  • enable
  • disable
Enable to use the IP address of the client to connect to the server.
users
-
Names of user objects.
name
- / required
Group name. Source user.local.name.
utm-status
-
    Choices:
  • enable
  • disable
Enable the use of UTM profiles/sensors/lists.
uuid
-
Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
waf-profile
-
Name of an existing Web application firewall profile. Source waf.profile.name.
webcache
-
    Choices:
  • enable
  • disable
Enable/disable web caching.
webcache-https
-
    Choices:
  • disable
  • enable
Enable/disable web caching for HTTPS (Requires deep-inspection enabled in ssl-ssh-profile).
webfilter-profile
-
Name of an existing Web filter profile. Source webfilter.profile.name.
webproxy-forward-server
-
Name of web proxy forward server. Source web-proxy.forward-server.name web-proxy.forward-server-group.name.
webproxy-profile
-
Name of web proxy profile. Source web-proxy.profile.name.
host
- / required
FortiOS or FortiGate ip address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol
password
-
Default:
""
FortiOS or FortiGate password.
username
- / required
FortiOS or FortiGate username.
vdom
-
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure proxy policies.
    fortios_firewall_proxy_policy:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      firewall_proxy_policy:
        state: "present"
        action: "accept"
        application-list: "<your_own_value> (source application.list.name)"
        av-profile: "<your_own_value> (source antivirus.profile.name)"
        comments: "<your_own_value>"
        disclaimer: "disable"
        dlp-sensor: "<your_own_value> (source dlp.sensor.name)"
        dstaddr:
         -
            name: "default_name_10 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name firewall.vip
              .name firewall.vipgrp.name firewall.vip46.name firewall.vipgrp46.name system.external-resource.name)"
        dstaddr-negate: "enable"
        dstaddr6:
         -
            name: "default_name_13 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name firewall.vip64.name firewall
              .vipgrp64.name system.external-resource.name)"
        dstintf:
         -
            name: "default_name_15 (source system.interface.name system.zone.name)"
        global-label: "<your_own_value>"
        groups:
         -
            name: "default_name_18 (source user.group.name)"
        http-tunnel-auth: "enable"
        icap-profile: "<your_own_value> (source icap.profile.name)"
        internet-service: "enable"
        internet-service-custom:
         -
            name: "default_name_23 (source firewall.internet-service-custom.name)"
        internet-service-id:
         -
            id:  "25 (source firewall.internet-service.id)"
        internet-service-negate: "enable"
        ips-sensor: "<your_own_value> (source ips.sensor.name)"
        label: "<your_own_value>"
        logtraffic: "all"
        logtraffic-start: "enable"
        policyid: "31"
        poolname:
         -
            name: "default_name_33 (source firewall.ippool.name)"
        profile-group: "<your_own_value> (source firewall.profile-group.name)"
        profile-protocol-options: "<your_own_value> (source firewall.profile-protocol-options.name)"
        profile-type: "single"
        proxy: "explicit-web"
        redirect-url: "<your_own_value>"
        replacemsg-override-group: "<your_own_value> (source system.replacemsg-group.name)"
        scan-botnet-connections: "disable"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        service:
         -
            name: "default_name_43 (source firewall.service.custom.name firewall.service.group.name)"
        service-negate: "enable"
        session-ttl: "45"
        spamfilter-profile: "<your_own_value> (source spamfilter.profile.name)"
        srcaddr:
         -
            name: "default_name_48 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name system
              .external-resource.name)"
        srcaddr-negate: "enable"
        srcaddr6:
         -
            name: "default_name_51 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
        srcintf:
         -
            name: "default_name_53 (source system.interface.name system.zone.name)"
        ssh-filter-profile: "<your_own_value> (source ssh-filter.profile.name)"
        ssl-ssh-profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
        status: "enable"
        transparent: "enable"
        users:
         -
            name: "default_name_59 (source user.local.name)"
        utm-status: "enable"
        uuid: "<your_own_value>"
        waf-profile: "<your_own_value> (source waf.profile.name)"
        webcache: "enable"
        webcache-https: "disable"
        webfilter-profile: "<your_own_value> (source webfilter.profile.name)"
        webproxy-forward-server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
        webproxy-profile: "<your_own_value> (source web-proxy.profile.name)"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.