fortios_router_policy – Configure IPv4 routing policies in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify router feature and policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
- / required
FortiOS or FortiGate ip address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol
password
-
Default:
""
FortiOS or FortiGate password.
router_policy
-
Default:
null
Configure IPv4 routing policies.
action
-
    Choices:
  • deny
  • permit
Action of the policy route.
comments
-
Optional comments.
dst
-
Destination IP and mask (x.x.x.x/x).
subnet
- / required
IP and mask.
dst-negate
-
    Choices:
  • enable
  • disable
Enable/disable negating destination address match.
dstaddr
-
Destination address name.
name
- / required
Address/group name. Source firewall.address.name firewall.addrgrp.name.
end-port
-
End destination port number (0 - 65535).
end-source-port
-
End source port number (0 - 65535).
gateway
-
IP address of the gateway.
input-device
-
Incoming interface name.
name
- / required
Interface name. Source system.interface.name.
output-device
-
Outgoing interface name. Source system.interface.name.
protocol
-
Protocol number (0 - 255).
seq-num
- / required
Sequence number.
src
-
Source IP and mask (x.x.x.x/x).
subnet
- / required
IP and mask.
src-negate
-
    Choices:
  • enable
  • disable
Enable/disable negating source address match.
srcaddr
-
Source address name.
name
- / required
Address/group name. Source firewall.address.name firewall.addrgrp.name.
start-port
-
Start destination port number (0 - 65535).
start-source-port
-
Start source port number (0 - 65535).
state
-
    Choices:
  • present
  • absent
Indicates whether to create or remove the object
status
-
    Choices:
  • enable
  • disable
Enable/disable this policy route.
tos
-
Type of service bit pattern.
tos-mask
-
Type of service evaluated bits.
username
- / required
FortiOS or FortiGate username.
vdom
-
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet

  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure IPv4 routing policies.
    fortios_router_policy:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      router_policy:
        state: "present"
        action: "deny"
        comments: "<your_own_value>"
        dst:
         -
            subnet: "<your_own_value>"
        dst-negate: "enable"
        dstaddr:
         -
            name: "default_name_9 (source firewall.address.name firewall.addrgrp.name)"
        end-port: "10"
        end-source-port: "11"
        gateway: "<your_own_value>"
        input-device:
         -
            name: "default_name_14 (source system.interface.name)"
        output-device: "<your_own_value> (source system.interface.name)"
        protocol: "16"
        seq-num: "17"
        src:
         -
            subnet: "<your_own_value>"
        src-negate: "enable"
        srcaddr:
         -
            name: "default_name_22 (source firewall.address.name firewall.addrgrp.name)"
        start-port: "23"
        start-source-port: "24"
        status: "enable"
        tos: "<your_own_value>"
        tos-mask: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
 always
Build number of the fortigate image

Sample:
1547
http_method
string
 always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
 always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
 success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
 always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
 always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
 always
Internal revision number

Sample:
17.0.2.10658
serial
string
 always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
 always
Indication of the operation's result

Sample:
success
vdom
string
 always
Virtual domain used

Sample:
root
version
string
 always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.