cisco.aci.aci_epg_to_domain – Bind EPGs to Domains (fv:RsDomAtt)

Note

This plugin is part of the cisco.aci collection (version 2.0.0).

To install it use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_epg_to_domain.

Synopsis

  • Bind EPGs to Physical and Virtual Domains on Cisco ACI fabrics.

Parameters

Parameter Choices/Defaults Comments
allow_useg
string
    Choices:
  • encap
  • useg
Allows micro-segmentation.
The APIC defaults to encap when unset during creation.
annotation
string
User-defined string for annotating an object.
If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead.
ap
string
Name of an existing application network profile, that will contain the EPGs.

aliases: app_profile, app_profile_name
certificate_name
string
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.
If a private_key filename was provided, this defaults to the private_key basename, without extension.
If PEM-formatted content was provided for private_key, this defaults to the username value.
If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.

aliases: cert_name
deploy_immediacy
string
    Choices:
  • immediate
  • lazy
Determines when the policy is pushed to hardware Policy CAM.
The APIC defaults to lazy when unset during creation.
domain
string
Name of the physical or virtual domain being associated with the EPG.

aliases: domain_name, domain_profile
domain_type
string
    Choices:
  • l2dom
  • phys
  • vmm
Specify whether the Domain is a physical (phys), a virtual (vmm) or an L2 external domain association (l2dom).

aliases: type
encap
integer
The VLAN encapsulation for the EPG when binding a VMM Domain with static encap_mode.
This acts as the secondary encap when using useg.
Accepted values range between 1 and 4096.
encap_mode
string
    Choices:
  • auto
  • vlan
  • vxlan
The encapsulation method to be used.
The APIC defaults to auto when unset during creation.
If vxlan is selected, switching_mode must be "AVE".
epg
string
Name of the end point group.

aliases: epg_name, name
host
string / required
IP Address or hostname of APIC resolvable by Ansible control host.
If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.

aliases: hostname
netflow
boolean
    Choices:
  • no
  • yes
Determines if netflow should be enabled.
The APIC defaults to no when unset during creation.
output_level
string
    Choices:
  • debug
  • info
  • normal ←
Influence the output of this ACI module.
normal means the standard output, incl. current dict
info adds informational output, incl. previous, proposed and sent dicts
debug adds debugging output, incl. filter_string, method, response, status and url information
If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead.
output_path
string
Path to a file that will be used to dump the ACI JSON configuration objects generated by the module.
If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.
owner_key
string
User-defined string for the ownerKey attribute of an ACI object.
This attribute represents a key for enabling clients to own their data for entity correlation.
If the value is not specified in the task, the value of environment variable ACI_OWNER_KEY will be used instead.
owner_tag
string
User-defined string for the ownerTag attribute of an ACI object.
This attribute represents a tag for enabling clients to add their own data.
For example, to indicate who created this object.
If the value is not specified in the task, the value of environment variable ACI_OWNER_TAG will be used instead.
password
string
The password to use for authentication.
This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.
If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Port number to be used for REST connection.
The default value depends on parameter use_ssl.
If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.
primary_encap
integer
Determines the primary VLAN ID when using useg.
Accepted values range between 1 and 4096.
private_key
string
Either a PEM-formatted private key file or the private key content used for signature-based authentication.
This value also influences the default certificate_name that is used.
This option is mutual exclusive with password. If password is provided too, it will be ignored.
If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY will be used instead.

aliases: cert_key
promiscuous
string
    Choices:
  • accept
  • reject ←
Allow/Disallow promiscuous mode in vmm domain
resolution_immediacy
string
    Choices:
  • immediate
  • lazy
  • pre-provision
Determines when the policies should be resolved and available.
The APIC defaults to lazy when unset during creation.
state
string
    Choices:
  • absent
  • present ←
  • query
Use present or absent for adding or removing.
Use query for listing an object or multiple objects.
switching_mode
string
    Choices:
  • AVE
  • native ←
Switching Mode used by the switch
tenant
string
Name of an existing tenant.

aliases: tenant_name
timeout
integer
Default:
30
The socket level timeout in seconds.
If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead.
use_ssl
boolean
    Choices:
  • no
  • yes ←
If no, an HTTP connection will be used instead of the default HTTPS connection.
If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead.
username
string
Default:
"admin"
The username to use for authentication.
If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated.
This should only set to no when used on personally controlled sites using self-signed certificates.
If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead.
vm_provider
string
    Choices:
  • cloudfoundry
  • kubernetes
  • microsoft
  • openshift
  • openstack
  • redhat
  • vmware
The VM platform for VMM Domains.
Support for Kubernetes was added in ACI v3.0.
Support for CloudFoundry, OpenShift and Red Hat was added in ACI v3.1.

Notes

Note

  • The tenant, ap, epg, and domain used must exist before using this module in your playbook. The cisco.aci.aci_tenant cisco.aci.aci_ap, cisco.aci.aci_epg cisco.aci.aci_domain modules can be used for this.

  • OpenStack VMM domains must not be created using this module. The OpenStack VMM domain is created directly by the Cisco APIC Neutron plugin as part of the installation and configuration. This module can be used to query status of an OpenStack VMM domain.

See Also

See also

cisco.aci.aci_ap

The official documentation on the cisco.aci.aci_ap module.

cisco.aci.aci_epg

The official documentation on the cisco.aci.aci_epg module.

cisco.aci.aci_domain

The official documentation on the cisco.aci.aci_domain module.

APIC Management Information Model reference

More information about the internal APIC class fv:RsDomAtt.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Add a new physical domain to EPG binding
  cisco.aci.aci_epg_to_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: anstest
    ap: anstest
    epg: anstest
    domain: anstest
    domain_type: phys
    state: present
  delegate_to: localhost

- name: Remove an existing physical domain to EPG binding
  cisco.aci.aci_epg_to_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: anstest
    ap: anstest
    epg: anstest
    domain: anstest
    domain_type: phys
    state: absent
  delegate_to: localhost

- name: Query a specific physical domain to EPG binding
  cisco.aci.aci_epg_to_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: anstest
    ap: anstest
    epg: anstest
    domain: anstest
    domain_type: phys
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all domain to EPG bindings
  cisco.aci.aci_epg_to_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost
  register: query_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
current
list / elements=string
success
The existing configuration from the APIC after the module has finished

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error
dictionary
failure
The error information as returned from the APIC

Sample:
{'code': '122', 'text': 'unknown managed object class foo'}
filter_string
string
failure or debug
The filter string used for the request

Sample:
?rsp-prop-include=config-only
method
string
failure or debug
The HTTP method used for the request to the APIC

Sample:
POST
previous
list / elements=string
info
The original configuration from the APIC before the module has started

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed
dictionary
info
The assembled configuration from the user-provided parameters

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw
string
parse error
The raw output returned by the APIC REST API (xml or json)

Sample:
<?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response
string
failure or debug
The HTTP response from the APIC

Sample:
OK (30 bytes)
sent
list / elements=string
info
The actual/minimal configuration pushed to the APIC

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status
integer
failure or debug
The HTTP status from the APIC

Sample:
200
url
string
failure or debug
The HTTP url used for the request to the APIC

Sample:
https://10.11.12.13/api/mo/uni/tn-production.json


Authors

  • Jacob McGill (@jmcgill298)

  • Shreyas Srish (@shrsr)