cisco.nxos.nxos_bgp_neighbor_address_family – BGP Neighbor Address Family resource module.
Note
This plugin is part of the cisco.nxos collection (version 2.8.2).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_bgp_neighbor_address_family
.
New in version 2.0.0: of cisco.nxos
Synopsis
This module manages BGP Neighbor Address Family configuration on devices running Cisco NX-OS.
Parameters
Parameter |
Comments |
---|---|
BGP Neighbor AF configuration. |
|
Autonomous System Number of the router. |
|
A list of BGP Neighbor AF configuration. |
|
BGP Neighbor Address Family related configurations. |
|
Specify route-map for conditional advertisement. |
|
Condition route-map to advertise only when prefix in condition exists. |
|
Condition route-map to advertise only when prefix in condition does not exist. |
|
Route-map name. |
|
Minimum interval between sending BGP routing updates. |
|
Address Family indicator. Choices:
|
|
Accept as-path with my AS present in it. |
|
Number of occurrences of AS number, default is 3. |
|
Activate allowas-in property. Choices:
|
|
Override matching AS-number while sending update. Choices:
|
|
Advertise capability to the peer. |
|
Additional paths capability. |
|
Additional paths Receive capability. Choices:
|
|
Additional paths Send capability. Choices:
|
|
Originate a default toward this peer. |
|
Route-map to specify criteria for originating default. |
|
Set default-originate attribute. Choices:
|
|
Disable checking of peer AS-number while advertising. Choices:
|
|
Name of filter-list. |
|
Apply policy to incoming routes. |
|
Apply policy to outgoing routes. |
|
Inherit a template. |
|
Sequence number. |
|
Template name. |
|
Maximum number of prefixes from this neighbor. |
|
Threshold percentage at which to generate a warning. |
|
Maximum prefix limit. |
|
Restart bgp connection after limit is exceeded. |
|
Only give a warning message when limit is exceeded. Choices:
|
|
Set our address as nexthop (non-reflected). |
|
Set our address as nexthop for all routes. Choices:
|
|
Set next-hop-self attribute. Choices:
|
|
Compute a third-party nexthop if possible. Choices:
|
|
Apply prefix-list. |
|
Apply policy to incoming routes. |
|
Apply policy to outgoing routes. |
|
Auto generate RTs for EBGP neighbor. Choices:
|
|
Apply route-map to neighbor. |
|
Apply policy to incoming routes. |
|
Apply policy to outgoing routes. |
|
Configure a neighbor as Route reflector client. Choices:
|
|
Sub Address Family indicator. Choices:
|
|
Send Community attribute to this neighbor. |
|
Send Standard and Extended Community attributes. Choices:
|
|
Send Extended Community attribute. Choices:
|
|
Set send-community attribute. Choices:
|
|
Send Standard Community attribute. Choices:
|
|
Soft reconfiguration. |
|
Always perform inbound soft reconfiguration. Choices:
|
|
Set soft-reconfiguration inbound attribute. Choices:
|
|
Specify Site-of-origin extcommunity. |
|
Advertise only active routes to peer. Choices:
|
|
Route-map to selectively unsuppress suppressed routes. |
|
Set default weight for routes from this neighbor. |
|
IP/IPv6 address of the neighbor. |
|
Virtual Router Context. |
|
A list of BGP Neighbor AF configuration. |
|
BGP Neighbor Address Family related configurations. |
|
Specify route-map for conditional advertisement. |
|
Condition route-map to advertise only when prefix in condition exists. |
|
Condition route-map to advertise only when prefix in condition does not exist. |
|
Route-map name. |
|
Minimum interval between sending BGP routing updates. |
|
Address Family indicator. Choices:
|
|
Accept as-path with my AS present in it. |
|
Number of occurrences of AS number, default is 3. |
|
Activate allowas-in property. Choices:
|
|
Override matching AS-number while sending update. Choices:
|
|
Advertise capability to the peer. |
|
Additional paths capability. |
|
Additional paths Receive capability. Choices:
|
|
Additional paths Send capability. Choices:
|
|
Originate a default toward this peer. |
|
Route-map to specify criteria for originating default. |
|
Set default-originate attribute. Choices:
|
|
Disable checking of peer AS-number while advertising. Choices:
|
|
Name of filter-list. |
|
Apply policy to incoming routes. |
|
Apply policy to outgoing routes. |
|
Inherit a template. |
|
Sequence number. |
|
Template name. |
|
Maximum number of prefixes from this neighbor. |
|
Threshold percentage at which to generate a warning. |
|
Maximum prefix limit. |
|
Restart bgp connection after limit is exceeded. |
|
Only give a warning message when limit is exceeded. Choices:
|
|
Set our address as nexthop (non-reflected). |
|
Set our address as nexthop for all routes. Choices:
|
|
Set next-hop-self attribute. Choices:
|
|
Compute a third-party nexthop if possible. Choices:
|
|
Apply prefix-list. |
|
Apply policy to incoming routes. |
|
Apply policy to outgoing routes. |
|
Auto generate RTs for EBGP neighbor. Choices:
|
|
Apply route-map to neighbor. |
|
Apply policy to incoming routes. |
|
Apply policy to outgoing routes. |
|
Configure a neighbor as Route reflector client. Choices:
|
|
Sub Address Family indicator. Choices:
|
|
Send Community attribute to this neighbor. |
|
Send Standard and Extended Community attributes. Choices:
|
|
Send Extended Community attribute. Choices:
|
|
Set send-community attribute. Choices:
|
|
Send Standard Community attribute. Choices:
|
|
Soft reconfiguration. |
|
Always perform inbound soft reconfiguration. Choices:
|
|
Set soft-reconfiguration inbound attribute. Choices:
|
|
Specify Site-of-origin extcommunity. |
|
Advertise only active routes to peer. Choices:
|
|
Route-map to selectively unsuppress suppressed routes. |
|
Set default weight for routes from this neighbor. |
|
IP/IPv6 address of the neighbor. |
|
VRF name. |
|
This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^router bgp’. The state parsed reads the configuration from |
|
The state the configuration should be left in. State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Refer to examples for more details. Choices:
|
Notes
Note
Tested against NX-OS 9.3.6.
Unsupported for Cisco MDS
For managing BGP address family configurations please use the cisco.nxos.nxos_bgp_address_family module.
This module works with connection
network_cli
andhttpapi
.
Examples
# Using merged
# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# Nexus9000v#
- name: Merge the provided configuration with the existing running configuration
cisco.nxos.nxos_bgp_neighbor_address_family: &id001
config:
as_number: 65536
neighbors:
- neighbor_address: 192.0.2.32
address_family:
- afi: ipv4
safi: unicast
maximum_prefix:
max_prefix_limit: 20
generate_warning_threshold: 75
weight: 100
prefix_list:
inbound: rmap1
outbound: rmap2
- afi: ipv6
safi: unicast
- neighbor_address: 192.0.2.33
address_family:
- afi: ipv4
safi: multicast
inherit:
template: BasePolicy
sequence: 200
vrfs:
- vrf: site-1
neighbors:
- neighbor_address: 203.0.113.1
address_family:
- afi: ipv4
safi: unicast
suppress_inactive: True
next_hop_self:
set: True
- neighbor_address: 203.0.113.2
address_family:
- afi: ipv6
safi: unicast
- afi: ipv4
safi: multicast
send_community:
set: True
# Task output
# -------------
# before: {}
#
# commands:
# - router bgp 65536
# - neighbor 192.0.2.32
# - address-family ipv4 unicast
# - maximum-prefix 20 75
# - weight 100
# - prefix-list rmap1 in
# - prefix-list rmap2 out
# - address-family ipv6 unicast
# - neighbor 192.0.2.33
# - address-family ipv4 multicast
# - inherit peer-policy BasePolicy 200
# - vrf site-1
# - neighbor 203.0.113.1
# - address-family ipv4 unicast
# - suppress-inactive
# - next-hop-self
# - neighbor 203.0.113.2
# - address-family ipv6 unicast
# - address-family ipv4 multicast
# - send-community
#
# after:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# maximum_prefix:
# max_prefix_limit: 20
# generate_warning_threshold: 75
# weight: 100
# prefix_list:
# inbound: rmap1
# outbound: rmap2
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# maximum-prefix 20 75
# weight 100
# prefix-list rmap1 in
# prefix-list rmap2 out
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
#
# Using replaced
# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# maximum-prefix 20 75
# weight 100
# prefix-list rmap1 in
# prefix-list rmap2 out
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
#
- name: Replace specified neighbor AFs with given configuration
cisco.nxos.nxos_bgp_neighbor_address_family: &replaced
config:
as_number: 65536
neighbors:
- neighbor_address: 192.0.2.32
address_family:
- afi: ipv4
safi: unicast
weight: 110
- afi: ipv6
safi: unicast
- neighbor_address: 192.0.2.33
address_family:
- afi: ipv4
safi: multicast
inherit:
template: BasePolicy
sequence: 200
vrfs:
- vrf: site-1
neighbors:
- neighbor_address: 203.0.113.1
address_family:
- afi: ipv4
safi: unicast
- neighbor_address: 203.0.113.2
address_family:
- afi: ipv6
safi: unicast
- afi: ipv4
safi: multicast
send_community:
set: True
state: replaced
# Task output
# -------------
# before:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# maximum_prefix:
# max_prefix_limit: 20
# generate_warning_threshold: 75
# weight: 100
# prefix_list:
# inbound: rmap1
# outbound: rmap2
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
#
# commands:
# - router bgp 65536
# - neighbor 192.0.2.32
# - address-family ipv4 unicast
# - no maximum-prefix 20 75
# - weight 110
# - no prefix-list rmap1 in
# - no prefix-list rmap2 out
# - vrf site-1
# - neighbor 203.0.113.1
# - address-family ipv4 unicast
# - no suppress-inactive
# - no next-hop-self
#
# after:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# weight: 110
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# weight 110
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
#
# Using overridden
# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# maximum-prefix 20 75
# weight 100
# prefix-list rmap1 in
# prefix-list rmap2 out
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
#
- name: Override all BGP AF configuration with provided configuration
cisco.nxos.nxos_bgp_neighbor_address_family:
config:
as_number: 65536
neighbors:
- neighbor_address: 192.0.2.32
address_family:
- afi: ipv4
safi: unicast
vrfs:
- vrf: site-1
neighbors:
- neighbor_address: 203.0.113.1
address_family:
- afi: ipv4
safi: unicast
suppress_inactive: True
next_hop_self:
set: True
state: overridden
# Task output
# -------------
# before:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# maximum_prefix:
# max_prefix_limit: 20
# generate_warning_threshold: 75
# weight: 100
# prefix_list:
# inbound: rmap1
# outbound: rmap2
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
#
# commands:
# - router bgp 65536
# - neighbor 192.0.2.32
# - address-family ipv4 unicast
# - no maximum-prefix 20 75
# - no weight 100
# - no prefix-list rmap1 in
# - no prefix-list rmap2 out
# - no address-family ipv6 unicast
# - neighbor 192.0.2.33
# - no address-family ipv4 multicast
# - vrf site-1
# - neighbor 203.0.113.2
# - no address-family ipv4 multicast
# - no address-family ipv6 unicast
#
# after:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: True
# next_hop_self:
# set: True
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# Using deleted to remove specified neighbor AFs
# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# maximum-prefix 20 75
# weight 100
# prefix-list rmap1 in
# prefix-list rmap2 out
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
#
- name: Delete BGP configs handled by this module
cisco.nxos.nxos_bgp_neighbor_address_family:
config:
as_number: 65536
neighbors:
- neighbor_address: 192.0.2.32
address_family:
- afi: ipv4
safi: unicast
vrfs:
- vrf: site-1
neighbors:
- neighbor_address: 203.0.113.2
address_family:
- afi: ipv6
safi: unicast
state: deleted
# Task output
# -------------
# before:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# maximum_prefix:
# max_prefix_limit: 20
# generate_warning_threshold: 75
# weight: 100
# prefix_list:
# inbound: rmap1
# outbound: rmap2
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
#
# commands:
# - router bgp 65536
# - neighbor 192.0.2.32
# - no address-family ipv4 unicast
# - vrf site-1
# - neighbor 203.0.113.2
# - no address-family ipv6 unicast
#
# after:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
#
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
#
# Using deleted to remove all neighbor AFs
# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# maximum-prefix 20 75
# weight 100
# prefix-list rmap1 in
# prefix-list rmap2 out
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
#
- name: Delete all BGP neighbor AF configs handled by this module
cisco.nxos.nxos_bgp_neighbor_address_family:
state: deleted
# Task output
# -------------
# before:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# maximum_prefix:
# max_prefix_limit: 20
# generate_warning_threshold: 75
# weight: 100
# prefix_list:
# inbound: rmap1
# outbound: rmap2
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
#
# commands:
# - router bgp 65536
# - neighbor 192.0.2.32
# - no address-family ipv4 unicast
# - no address-family ipv6 unicast
# - neighbor 192.0.2.33
# - no address-family ipv4 multicast
# - vrf site-1
# - neighbor 203.0.113.1
# - no address-family ipv4 unicast
# - neighbor 203.0.113.2
# - no address-family ipv6 unicast
# - no address-family ipv4 multicast
#
# after:
# as_number: "65536"
#
# After state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# neighbor 192.0.2.32
# neighbor 192.0.2.33
# vrf site-1
# neighbor 203.0.113.1
# neighbor 203.0.113.2
#
# Using rendered
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
cisco.nxos.nxos_bgp_neighbor_address_family:
config:
as_number: 65536
neighbors:
- neighbor_address: 192.0.2.32
address_family:
- afi: ipv4
safi: unicast
maximum_prefix:
max_prefix_limit: 20
generate_warning_threshold: 75
weight: 100
prefix_list:
inbound: rmap1
outbound: rmap2
- afi: ipv6
safi: unicast
- neighbor_address: 192.0.2.33
address_family:
- afi: ipv4
safi: multicast
inherit:
template: BasePolicy
sequence: 200
vrfs:
- vrf: site-1
neighbors:
- neighbor_address: 203.0.113.1
address_family:
- afi: ipv4
safi: unicast
suppress_inactive: True
next_hop_self:
set: True
- neighbor_address: 203.0.113.2
address_family:
- afi: ipv6
safi: unicast
- afi: ipv4
safi: multicast
send_community:
set: True
state: rendered
# Task Output (redacted)
# -----------------------
# rendered:
# - router bgp 65536
# - neighbor 192.0.2.32
# - address-family ipv4 unicast
# - maximum-prefix 20 75
# - weight 100
# - prefix-list rmap1 in
# - prefix-list rmap2 out
# - address-family ipv6 unicast
# - neighbor 192.0.2.33
# - address-family ipv4 multicast
# - inherit peer-policy BasePolicy 200
# - vrf site-1
# - neighbor 203.0.113.1
# - address-family ipv4 unicast
# - suppress-inactive
# - next-hop-self
# - neighbor 203.0.113.2
# - address-family ipv6 unicast
# - address-family ipv4 multicast
# - send-community
# Using parsed
# parsed.cfg
# ------------
# router bgp 65536
# neighbor 192.0.2.32
# address-family ipv4 unicast
# maximum-prefix 20 75
# weight 100
# prefix-list rmap1 in
# prefix-list rmap2 out
# address-family ipv6 unicast
# neighbor 192.0.2.33
# address-family ipv4 multicast
# inherit peer-policy BasePolicy 200
# vrf site-1
# neighbor 203.0.113.1
# address-family ipv4 unicast
# suppress-inactive
# next-hop-self
# neighbor 203.0.113.2
# address-family ipv4 multicast
# send-community
# address-family ipv6 unicast
- name: Parse externally provided BGP neighbor AF config
register: result
cisco.nxos.nxos_bgp_neighbor_address_family:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
# Task output (redacted)
# -----------------------
# parsed:
# as_number: "65536"
# neighbors:
# - neighbor_address: 192.0.2.32
# address_family:
# - afi: ipv4
# safi: unicast
# maximum_prefix:
# max_prefix_limit: 20
# generate_warning_threshold: 75
# weight: 100
# prefix_list:
# inbound: rmap1
# outbound: rmap2
# - afi: ipv6
# safi: unicast
# - neighbor_address: 192.0.2.33
# address_family:
# - afi: ipv4
# safi: multicast
# inherit:
# template: BasePolicy
# sequence: 200
# vrfs:
# - vrf: site-1
# neighbors:
# - neighbor_address: 203.0.113.1
# address_family:
# - afi: ipv4
# safi: unicast
# suppress_inactive: true
# next_hop_self:
# set: true
# - neighbor_address: 203.0.113.2
# address_family:
# - afi: ipv4
# safi: multicast
# send_community:
# set: True
# - afi: ipv6
# safi: unicast
Authors
Nilashish Chakraborty (@NilashishC)