cisco.nxos.nxos_bgp_neighbor_af – (deprecated, removed after 2023-02-24) Manages BGP address-family’s neighbors configuration.

Note

This plugin is part of the cisco.nxos collection (version 2.8.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bgp_neighbor_af.

New in version 1.0.0: of cisco.nxos

DEPRECATED

Removed in

major release after 2023-02-24

Why

Updated module released with more functionality.

Alternative

nxos_bgp_neighbor_address_family

Synopsis

  • Manages BGP address-family’s neighbors configurations on NX-OS switches.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

additional_paths_receive

string

Valid values are enable for basic command enablement; disable for disabling the command at the neighbor af level (it adds the disable keyword to the basic command); and inherit to remove the command at this level (the command value is inherited from a higher BGP layer).

Choices:

  • enable

  • disable

  • inherit

additional_paths_send

string

Valid values are enable for basic command enablement; disable for disabling the command at the neighbor af level (it adds the disable keyword to the basic command); and inherit to remove the command at this level (the command value is inherited from a higher BGP layer).

Choices:

  • enable

  • disable

  • inherit

advertise_map_exist

list / elements=string

Conditional route advertisement. This property requires two route maps, an advertise-map and an exist-map. Valid values are an array specifying both the advertise-map name and the exist-map name, or simply ‘default’ e.g. [‘my_advertise_map’, ‘my_exist_map’]. This command is mutually exclusive with the advertise_map_non_exist property.

advertise_map_non_exist

list / elements=string

Conditional route advertisement. This property requires two route maps, an advertise-map and an exist-map. Valid values are an array specifying both the advertise-map name and the non-exist-map name, or simply ‘default’ e.g. [‘my_advertise_map’, ‘my_non_exist_map’]. This command is mutually exclusive with the advertise_map_exist property.

afi

string / required

Address Family Identifier.

Choices:

  • ipv4

  • ipv6

  • vpnv4

  • vpnv6

  • l2vpn

allowas_in

boolean

Activate allowas-in property

Choices:

  • no

  • yes

allowas_in_max

string

Max-occurrences value for allowas_in. Valid values are an integer value or ‘default’. This is mutually exclusive with allowas_in.

as_override

boolean

Activate the as-override feature.

Choices:

  • no

  • yes

asn

string / required

BGP autonomous system number. Valid values are String, Integer in ASPLAIN or ASDOT notation.

default_originate

boolean

Activate the default-originate feature.

Choices:

  • no

  • yes

default_originate_route_map

string

Route-map for the default_originate property. Valid values are a string defining a route-map name, or ‘default’. This is mutually exclusive with default_originate.

disable_peer_as_check

boolean

Disable checking of peer AS-number while advertising

Choices:

  • no

  • yes

filter_list_in

string

Valid values are a string defining a filter-list name, or ‘default’.

filter_list_out

string

Valid values are a string defining a filter-list name, or ‘default’.

max_prefix_interval

string

Optional restart interval. Valid values are an integer. Requires max_prefix_limit. May not be combined with max_prefix_warning.

max_prefix_limit

string

maximum-prefix limit value. Valid values are an integer value or ‘default’.

max_prefix_threshold

string

Optional threshold percentage at which to generate a warning. Valid values are an integer value. Requires max_prefix_limit.

max_prefix_warning

boolean

Optional warning-only keyword. Requires max_prefix_limit. May not be combined with max_prefix_interval.

Choices:

  • no

  • yes

neighbor

string / required

Neighbor Identifier. Valid values are string. Neighbors may use IPv4 or IPv6 notation, with or without prefix length.

next_hop_self

boolean

Activate the next-hop-self feature.

Choices:

  • no

  • yes

next_hop_third_party

boolean

Activate the next-hop-third-party feature.

Choices:

  • no

  • yes

prefix_list_in

string

Valid values are a string defining a prefix-list name, or ‘default’.

prefix_list_out

string

Valid values are a string defining a prefix-list name, or ‘default’.

provider

dictionary

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.

This option will be removed in a release after 2022-06-01.

For more information please see the https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html.


A dict object containing connection details.

auth_pass

string

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

Choices:

  • no ← (default)

  • yes

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).

ssh_keyfile

string

Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).

transport

string

Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.

Choices:

  • cli ← (default)

  • nxapi

use_proxy

boolean

If no, the environment variables http_proxy and https_proxy will be ignored.

Choices:

  • no

  • yes ← (default)

use_ssl

boolean

Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.

Choices:

  • no ← (default)

  • yes

username

string

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

validate_certs

boolean

If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

Choices:

  • no ← (default)

  • yes

rewrite_evpn_rt_asn

boolean

added in 1.1.0 of cisco.nxos

Auto generate route targets for EBGP neighbor.

Choices:

  • no

  • yes

route_map_in

string

Valid values are a string defining a route-map name, or ‘default’.

route_map_out

string

Valid values are a string defining a route-map name, or ‘default’.

route_reflector_client

boolean

Router reflector client.

Choices:

  • no

  • yes

safi

string / required

Sub Address Family Identifier.

Choices:

  • unicast

  • multicast

  • evpn

send_community

string

send-community attribute.

Choices:

  • none

  • both

  • extended

  • standard

  • default

soft_reconfiguration_in

string

Valid values are ‘enable’ for basic command enablement; ‘always’ to add the always keyword to the basic command; and ‘inherit’ to remove the command at this level (the command value is inherited from a higher BGP layer).

Choices:

  • enable

  • always

  • inherit

soo

string

Site-of-origin. Valid values are a string defining a VPN extcommunity or ‘default’.

state

string

Determines whether the config should be present or not on the device.

Choices:

  • present ← (default)

  • absent

suppress_inactive

boolean

suppress-inactive feature.

Choices:

  • no

  • yes

unsuppress_map

string

unsuppress-map. Valid values are a string defining a route-map name or ‘default’.

vrf

string

Name of the VRF. The name ‘default’ is a valid VRF representing the global bgp.

Default: “default”

weight

string

Weight value. Valid values are an integer value or ‘default’.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL

  • Unsupported for Cisco MDS

  • state=absent removes the whole BGP address-family’s neighbor configuration.

  • Default, when supported, removes properties

  • In order to default maximum-prefix configuration, only max_prefix_limit=default is needed.

  • For information on using CLI and NX-API see the NXOS Platform Options guide

  • For more information on using Ansible to manage network devices see the Ansible Network Guide

  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- name: configure RR client
  cisco.nxos.nxos_bgp_neighbor_af:
    asn: 65535
    neighbor: 192.0.2.3
    afi: ipv4
    safi: unicast
    route_reflector_client: true
    state: present
    rewrite_evpn_rt_asn: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

commands sent to the device

Returned: always

Sample: [“router bgp 65535”, “neighbor 192.0.2.3”, “address-family ipv4 unicast”, “route-reflector-client”, “rewrite-evpn-rt-asn”]

Status

  • This module will be removed in a major release after 2023-02-24. [deprecated]

  • For more information see DEPRECATED.

Authors

  • Gabriele Gerbino (@GGabriele)