You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

community.general.hwc_ecs_instance – Creates a resource of Ecs/Instance in Huawei Cloud

Note

This plugin is part of the community.general collection (version 3.8.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.hwc_ecs_instance.

New in version 0.2.0: of community.general

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis 

instance management.

Requirements 

The below requirements are needed on the host that executes this module.

keystoneauth1 >= 3.6.0

Parameters 

Parameter	Comments
admin_pass string	Specifies the initial login password of the administrator account for logging in to an ECS using password authentication. The Linux administrator is root, and the Windows administrator is Administrator. Password complexity requirements, consists of 8 to 26 characters. The password must contain at least three of the following character types ‘uppercase letters, lowercase letters, digits, and special characters (!@$%^-_=+[{}]:,./?)’. The password cannot contain the username or the username in reverse. The Windows ECS password cannot contain the username, the username in reverse, or more than two consecutive characters in the username.
availability_zone string / required	Specifies the name of the AZ where the ECS is located.
data_volumes list / elements=dictionary	Specifies the data disks of ECS instance.
device string	Specifies the disk device name.
volume_id string / required	Specifies the disk ID.
description string	Specifies the description of an ECS, which is a null string by default. Can contain a maximum of 85 characters. Cannot contain special characters, such as < and >.
domain string / required	The name of the Domain to scope to (Identity v3). (currently only domain names are supported, and not domain IDs).
eip_id string	Specifies the ID of the elastic IP address assigned to the ECS. Only elastic IP addresses in the DOWN state can be assigned.
enable_auto_recovery boolean	Specifies whether automatic recovery is enabled on the ECS. Choices: no yes
enterprise_project_id string	Specifies the ID of the enterprise project to which the ECS belongs.
flavor_name string / required	Specifies the name of the system flavor.
id string	The id of resource to be managed.
identity_endpoint string / required	The Identity authentication URL.
image_id string / required	Specifies the ID of the system image.
name string / required	Specifies the ECS name. Value requirements consists of 1 to 64 characters, including letters, digits, underscores `_`, hyphens (-), periods (.).
nics list / elements=dictionary / required	Specifies the NIC information of the ECS. Constraints the network of the NIC must belong to the VPC specified by vpc_id. A maximum of 12 NICs can be attached to an ECS.
ip_address string / required	Specifies the IP address of the NIC. The value is an IPv4 address. Its value must be an unused IP address in the network segment of the subnet.
subnet_id string / required	Specifies the ID of subnet.
password string / required	The password to login with.
project string / required	The name of the Tenant (Identity v2) or Project (Identity v3). (currently only project names are supported, and not project IDs).
region string	The region to which the project belongs.
root_volume dictionary / required	Specifies the configuration of the ECS’s system disks.
size integer	Specifies the system disk size, in GB. The value range is 1 to 1024. The system disk size must be greater than or equal to the minimum system disk size supported by the image (min_disk attribute of the image). If this parameter is not specified or is set to 0, the default system disk size is the minimum value of the system disk in the image (min_disk attribute of the image).
snapshot_id string	Specifies the snapshot ID or ID of the original data disk contained in the full-ECS image.
volume_type string / required	Specifies the ECS system disk type. SATA is common I/O disk type. SAS is high I/O disk type. SSD is ultra-high I/O disk type. co-p1 is high I/O (performance-optimized I) disk type. uh-l1 is ultra-high I/O (latency-optimized) disk type. NOTE is For HANA, HL1, and HL2 ECSs, use co-p1 and uh-l1 disks. For other ECSs, do not use co-p1 or uh-l1 disks.
security_groups list / elements=string	Specifies the security groups of the ECS. If this parameter is left blank, the default security group is bound to the ECS by default.
server_metadata dictionary	Specifies the metadata of ECS to be created.
server_tags dictionary	Specifies the tags of an ECS. When you create ECSs, one ECS supports up to 10 tags.
ssh_key_name string	Specifies the name of the SSH key used for logging in to the ECS.
state string	Whether the given object should exist in Huawei Cloud. Choices: present ← (default) absent
timeouts dictionary	The timeouts for each operations.
create string	The timeouts for create operation. Default: “30m”
delete string	The timeouts for delete operation. Default: “30m”
update string	The timeouts for update operation. Default: “30m”
user string / required	The user name to login with (currently only user names are supported, and not user IDs).
user_data string	Specifies the user data to be injected during the ECS creation process. Text, text files, and gzip files can be injected. The content to be injected must be encoded with base64. The maximum size of the content to be injected (before encoding) is 32 KB. For Linux ECSs, this parameter does not take effect when adminPass is used.
vpc_id string / required	Specifies the ID of the VPC to which the ECS belongs.

Notes 

Note

For authentication, you can set identity_endpoint using the ANSIBLE_HWC_IDENTITY_ENDPOINT env variable.
For authentication, you can set user using the ANSIBLE_HWC_USER env variable.
For authentication, you can set password using the ANSIBLE_HWC_PASSWORD env variable.
For authentication, you can set domain using the ANSIBLE_HWC_DOMAIN env variable.
For authentication, you can set project using the ANSIBLE_HWC_PROJECT env variable.
For authentication, you can set region using the ANSIBLE_HWC_REGION env variable.
Environment variables values will only be used if the playbook values are not set.

Examples 

# create an ecs instance
- name: Create a vpc
  hwc_network_vpc:
    cidr: "192.168.100.0/24"
    name: "ansible_network_vpc_test"
  register: vpc
- name: Create a subnet
  hwc_vpc_subnet:
    gateway_ip: "192.168.100.32"
    name: "ansible_network_subnet_test"
    dhcp_enable: true
    vpc_id: "{{ vpc.id }}"
    cidr: "192.168.100.0/26"
  register: subnet
- name: Create a eip
  hwc_vpc_eip:
    dedicated_bandwidth:
      charge_mode: "traffic"
      name: "ansible_test_dedicated_bandwidth"
      size: 1
    type: "5_bgp"
  register: eip
- name: Create a disk
  hwc_evs_disk:
    availability_zone: "cn-north-1a"
    name: "ansible_evs_disk_test"
    volume_type: "SATA"
    size: 10
  register: disk
- name: Create an instance
  community.general.hwc_ecs_instance:
    data_volumes:
      - volume_id: "{{ disk.id }}"
    enable_auto_recovery: false
    eip_id: "{{ eip.id }}"
    name: "ansible_ecs_instance_test"
    availability_zone: "cn-north-1a"
    nics:
      - subnet_id: "{{ subnet.id }}"
        ip_address: "192.168.100.33"
      - subnet_id: "{{ subnet.id }}"
        ip_address: "192.168.100.34"
    server_tags:
      my_server: "my_server"
    image_id: "8da46d6d-6079-4e31-ad6d-a7167efff892"
    flavor_name: "s3.small.1"
    vpc_id: "{{ vpc.id }}"
    root_volume:
      volume_type: "SAS"

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
admin_pass string	Specifies the initial login password of the administrator account for logging in to an ECS using password authentication. The Linux administrator is root, and the Windows administrator is Administrator. Password complexity requirements consists of 8 to 26 characters. The password must contain at least three of the following character types “uppercase letters, lowercase letters, digits, and special characters (!@$%^-_=+[{}]:,./?)”. The password cannot contain the username or the username in reverse. The Windows ECS password cannot contain the username, the username in reverse, or more than two consecutive characters in the username. Returned: success
availability_zone string	Specifies the name of the AZ where the ECS is located. Returned: success
config_drive string	Specifies the configuration driver. Returned: success
created string	Specifies the time when an ECS was created. Returned: success
data_volumes list / elements=string	Specifies the data disks of ECS instance. Returned: success
device string	Specifies the disk device name. Returned: success
volume_id string	Specifies the disk ID. Returned: success
description string	Specifies the description of an ECS, which is a null string by default. Can contain a maximum of 85 characters. Cannot contain special characters, such as < and >. Returned: success
disk_config_type string	Specifies the disk configuration type. MANUAL is The image space is not expanded. AUTO is the image space of the system disk will be expanded to be as same as the flavor. Returned: success
eip_id string	Specifies the ID of the elastic IP address assigned to the ECS. Only elastic IP addresses in the DOWN state can be assigned. Returned: success
enable_auto_recovery boolean	Specifies whether automatic recovery is enabled on the ECS. Returned: success
enterprise_project_id string	Specifies the ID of the enterprise project to which the ECS belongs. Returned: success
flavor_name string	Specifies the name of the system flavor. Returned: success
host_name string	Specifies the host name of the ECS. Returned: success
image_id string	Specifies the ID of the system image. Returned: success
image_name string	Specifies the image name of the ECS. Returned: success
name string	Specifies the ECS name. Value requirements “Consists of 1 to 64 characters, including letters, digits, underscores `_`, hyphens (-), periods (.)”. Returned: success
nics list / elements=string	Specifies the NIC information of the ECS. The network of the NIC must belong to the VPC specified by vpc_id. A maximum of 12 NICs can be attached to an ECS. Returned: success
ip_address string	Specifies the IP address of the NIC. The value is an IPv4 address. Its value must be an unused IP address in the network segment of the subnet. Returned: success
port_id string	Specifies the port ID corresponding to the IP address. Returned: success
subnet_id string	Specifies the ID of subnet. Returned: success
power_state integer	Specifies the power status of the ECS. Returned: success
root_volume dictionary	Specifies the configuration of the ECS’s system disks. Returned: success
device string	Specifies the disk device name. Returned: success
size integer	Specifies the system disk size, in GB. The value range is 1 to 1024. The system disk size must be greater than or equal to the minimum system disk size supported by the image (min_disk attribute of the image). If this parameter is not specified or is set to 0, the default system disk size is the minimum value of the system disk in the image (min_disk attribute of the image). Returned: success
snapshot_id string	Specifies the snapshot ID or ID of the original data disk contained in the full-ECS image. Returned: success
volume_id string	Specifies the disk ID. Returned: success
volume_type string	Specifies the ECS system disk type. SATA is common I/O disk type. SAS is high I/O disk type. SSD is ultra-high I/O disk type. co-p1 is high I/O (performance-optimized I) disk type. uh-l1 is ultra-high I/O (latency-optimized) disk type. NOTE is For HANA, HL1, and HL2 ECSs, use co-p1 and uh-l1 disks. For other ECSs, do not use co-p1 or uh-l1 disks. Returned: success
security_groups list / elements=string	Specifies the security groups of the ECS. If this parameter is left blank, the default security group is bound to the ECS by default. Returned: success
server_alias string	Specifies the ECS alias. Returned: success
server_metadata dictionary	Specifies the metadata of ECS to be created. Returned: success
server_tags dictionary	Specifies the tags of an ECS. When you create ECSs, one ECS supports up to 10 tags. Returned: success
ssh_key_name string	Specifies the name of the SSH key used for logging in to the ECS. Returned: success
status string	Specifies the ECS status. Options are ACTIVE, REBOOT, HARD_REBOOT, REBUILD, MIGRATING, BUILD, SHUTOFF, RESIZE, VERIFY_RESIZE, ERROR, and DELETED. Returned: success
user_data string	Specifies the user data to be injected during the ECS creation process. Text, text files, and gzip files can be injected. The content to be injected must be encoded with base64. The maximum size of the content to be injected (before encoding) is 32 KB. For Linux ECSs, this parameter does not take effect when adminPass is used. Returned: success
vpc_id string	Specifies the ID of the VPC to which the ECS belongs. Returned: success

Authors

Huawei Inc. (@huaweicloud)

community.general.hwc_ecs_instance – Creates a resource of Ecs/Instance in Huawei Cloud

Synopsis

Requirements

Parameters

Notes

Examples

Return Values