community.general.hwc_vpc_eip – Creates a resource of Vpc/EIP in Huawei Cloud

Note

This plugin is part of the community.general collection (version 3.8.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.hwc_vpc_eip.

New in version 0.2.0: of community.general

Synopsis

  • elastic ip management.

Requirements

The below requirements are needed on the host that executes this module.

  • keystoneauth1 >= 3.6.0

Parameters

Parameter

Comments

dedicated_bandwidth

dictionary

Specifies the dedicated bandwidth object.

charge_mode

string / required

Specifies whether the bandwidth is billed by traffic or by bandwidth size. The value can be bandwidth or traffic. If this parameter is left blank or is null character string, default value bandwidth is used. For IPv6 addresses, the default parameter value is bandwidth outside China and is traffic in China.

name

string / required

Specifies the bandwidth name. The value is a string of 1 to 64 characters that can contain letters, digits, underscores _, hyphens (-), and periods (.).

size

integer / required

Specifies the bandwidth size. The value ranges from 1 Mbit/s to 2000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.) The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows.

The minimum unit is 1 Mbit/s if the allowed bandwidth size ranges from 0 to 300 Mbit/s (with 300 Mbit/s included).

The minimum unit is 50 Mbit/s if the allowed bandwidth size ranges 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included).

The minimum unit is 500 Mbit/s if the allowed bandwidth size is greater than 1000 Mbit/s.

domain

string / required

The name of the Domain to scope to (Identity v3). (currently only domain names are supported, and not domain IDs).

enterprise_project_id

string

Specifies the enterprise project ID.

id

string

The id of resource to be managed.

identity_endpoint

string / required

The Identity authentication URL.

ip_version

integer

The value can be 4 (IPv4 address) or 6 (IPv6 address). If this parameter is left blank, an IPv4 address will be assigned.

ipv4_address

string

Specifies the obtained IPv4 EIP. The system automatically assigns an EIP if you do not specify it.

password

string / required

The password to login with.

port_id

string

Specifies the port ID. This parameter is returned only when a private IP address is bound with the EIP.

project

string / required

The name of the Tenant (Identity v2) or Project (Identity v3). (currently only project names are supported, and not project IDs).

region

string

The region to which the project belongs.

shared_bandwidth_id

string

Specifies the ID of shared bandwidth.

state

string

Whether the given object should exist in Huawei Cloud.

Choices:

  • present ← (default)

  • absent

timeouts

dictionary

The timeouts for each operations.

create

string

The timeouts for create operation.

Default: “5m”

update

string

The timeouts for update operation.

Default: “5m”

type

string / required

Specifies the EIP type.

user

string / required

The user name to login with (currently only user names are supported, and not user IDs).

Notes

Note

  • For authentication, you can set identity_endpoint using the ANSIBLE_HWC_IDENTITY_ENDPOINT env variable.

  • For authentication, you can set user using the ANSIBLE_HWC_USER env variable.

  • For authentication, you can set password using the ANSIBLE_HWC_PASSWORD env variable.

  • For authentication, you can set domain using the ANSIBLE_HWC_DOMAIN env variable.

  • For authentication, you can set project using the ANSIBLE_HWC_PROJECT env variable.

  • For authentication, you can set region using the ANSIBLE_HWC_REGION env variable.

  • Environment variables values will only be used if the playbook values are not set.

Examples

# create an eip and bind it to a port
- name: Create vpc
  hwc_network_vpc:
    cidr: "192.168.100.0/24"
    name: "ansible_network_vpc_test"
  register: vpc
- name: Create subnet
  hwc_vpc_subnet:
    gateway_ip: "192.168.100.32"
    name: "ansible_network_subnet_test"
    dhcp_enable: True
    vpc_id: "{{ vpc.id }}"
    cidr: "192.168.100.0/26"
  register: subnet
- name: Create a port
  hwc_vpc_port:
    subnet_id: "{{ subnet.id }}"
    ip_address: "192.168.100.33"
  register: port
- name: Create an eip and bind it to a port
  community.general.hwc_vpc_eip:
    type: "5_bgp"
    dedicated_bandwidth:
      charge_mode: "traffic"
      name: "ansible_test_dedicated_bandwidth"
      size: 1
    port_id: "{{ port.id }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

create_time

string

Specifies the time (UTC time) when the EIP was assigned.

Returned: success

dedicated_bandwidth

dictionary

Specifies the dedicated bandwidth object.

Returned: success

charge_mode

string

Specifies whether the bandwidth is billed by traffic or by bandwidth size. The value can be bandwidth or traffic. If this parameter is left blank or is null character string, default value bandwidth is used. For IPv6 addresses, the default parameter value is bandwidth outside China and is traffic in China.

Returned: success

id

string

Specifies the ID of dedicated bandwidth.

Returned: success

name

string

Specifies the bandwidth name. The value is a string of 1 to 64 characters that can contain letters, digits, underscores _, hyphens (-), and periods (.).

Returned: success

size

integer

Specifies the bandwidth size. The value ranges from 1 Mbit/s to 2000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.) The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows:.

The minimum unit is 1 Mbit/s if the allowed bandwidth size ranges from 0 to 300 Mbit/s (with 300 Mbit/s included).

The minimum unit is 50 Mbit/s if the allowed bandwidth size ranges 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included).

The minimum unit is 500 Mbit/s if the allowed bandwidth size is greater than 1000 Mbit/s.

Returned: success

enterprise_project_id

string

Specifies the enterprise project ID.

Returned: success

ip_version

integer

The value can be 4 (IPv4 address) or 6 (IPv6 address). If this parameter is left blank, an IPv4 address will be assigned.

Returned: success

ipv4_address

string

Specifies the obtained IPv4 EIP. The system automatically assigns an EIP if you do not specify it.

Returned: success

ipv6_address

string

Specifies the obtained IPv6 EIP.

Returned: success

port_id

string

Specifies the port ID. This parameter is returned only when a private IP address is bound with the EIP.

Returned: success

private_ip_address

string

Specifies the private IP address bound with the EIP. This parameter is returned only when a private IP address is bound with the EIP.

Returned: success

shared_bandwidth_id

string

Specifies the ID of shared bandwidth.

Returned: success

type

string

Specifies the EIP type.

Returned: success

Authors

  • Huawei Inc. (@huaweicloud)