community.kubevirt.kubevirt_vm – Manage KubeVirt virtual machine

Note

This plugin is part of the community.kubevirt collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.kubevirt.

To use it in a playbook, specify: community.kubevirt.kubevirt_vm.

Synopsis

  • Use Openshift Python SDK to manage the state of KubeVirt virtual machines.

Requirements

The below requirements are needed on the host that executes this module.

  • openshift >= 0.8.2

  • python >= 2.7

Parameters

Parameter

Comments

affinity

dictionary

Describes node affinity scheduling rules for the vm.

hard

dictionary

If the affinity requirements specified by this field are not met at scheduling time, the vm will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during vm execution (e.g. due to a vm label update), the system may or may not try to eventually evict the vm from its node. When there are multiple elements, the lists of nodes corresponding to each term are intersected, i.e. all terms must be satisfied.

soft

dictionary

The scheduler will prefer to schedule vms to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding weight to the sum if the node has vms which matches the corresponding term; the nodes with the highest sum are the most preferred.

anti_affinity

dictionary

Describes vm anti-affinity scheduling rules e.g. avoid putting this vm in the same node, zone, etc. as some other vms.

hard

dictionary

If the anti-affinity requirements specified by this field are not met at scheduling time, the vm will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during vm execution (e.g. due to a vm label update), the system may or may not try to eventually evict the vm from its node. When there are multiple elements, the lists of nodes corresponding to each term are intersected, i.e. all terms must be satisfied.

soft

dictionary

The scheduler will prefer to schedule vms to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding weight to the sum if the node has vms which matches the corresponding term; the nodes with the highest sum are the most preferred.

api_key

string

Token used to authenticate with the API. Can also be specified via K8S_AUTH_API_KEY environment variable.

bootloader

string

Specify the bootloader of the virtual machine.

All virtual machines use BIOS by default for booting.

ca_cert

aliases: ssl_ca_cert

path

Path to a CA certificate used to authenticate with the API. The full certificate chain must be provided to avoid certificate validation errors. Can also be specified via K8S_AUTH_SSL_CA_CERT environment variable.

client_cert

aliases: cert_file

path

Path to a certificate used to authenticate with the API. Can also be specified via K8S_AUTH_CERT_FILE environment variable.

client_key

aliases: key_file

path

Path to a key file used to authenticate with the API. Can also be specified via K8S_AUTH_KEY_FILE environment variable.

cloud_init_nocloud

dictionary

Represents a cloud-init NoCloud user-data source. The NoCloud data will be added as a disk to the virtual machine. A proper cloud-init installation is required inside the guest. More information https://kubevirt.io/api-reference/master/definitions.html#_v1_cloudinitnocloudsource

context

string

The name of a context found in the config file. Can also be specified via K8S_AUTH_CONTEXT environment variable.

cpu_cores

integer

Number of CPU cores.

cpu_features

list / elements=string

List of dictionary to fine-tune features provided by the selected CPU model.

Note: Policy attribute can either be omitted or contain one of the following policies: force, require, optional, disable, forbid.

Note: In case a policy is omitted for a feature, it will default to require.

More information about policies: https://libvirt.org/formatdomain.html#elementsCPU

cpu_limit

integer

Is converted to its millicore value and multiplied by 100. The resulting value is the total amount of CPU time that a container can use every 100ms. A virtual machine cannot use more than its share of CPU time during this interval.

cpu_model

string

CPU model.

You can check list of available models here: https://github.com/libvirt/libvirt/blob/master/src/cpu_map/index.xml.

Note: User can define default CPU model via as default-cpu-model in kubevirt-config ConfigMap, if not set host-model is used.

Note: Be sure that node CPU model where you run a VM, has the same or higher CPU family.

Note: If CPU model wasn’t defined, the VM will have CPU model closest to one that used on the node where the VM is running.

cpu_shares

integer

Specify CPU shares.

datavolumes

list / elements=string

DataVolumes are a way to automate importing virtual machine disks onto pvcs during the virtual machine’s launch flow. Without using a DataVolume, users have to prepare a pvc with a disk image before assigning it to a VM or VMI manifest. With a DataVolume, both the pvc creation and import is automated on behalf of the user.

disks

list / elements=string

List of dictionaries which specify disks of the virtual machine.

A disk can be made accessible via four different types: disk, lun, cdrom, floppy.

All possible configuration options are available in https://kubevirt.io/api-reference/master/definitions.html#_v1_disk

Each disk must have specified a volume that declares which volume type of the disk All possible configuration options of volume are available in https://kubevirt.io/api-reference/master/definitions.html#_v1_volume.

ephemeral

boolean

If (true) ephemeral virtual machine will be created. When destroyed it won’t be accessible again.

Works only with state present and absent.

Choices:

  • no ← (default)

  • yes

force

boolean

If set to no, and state is present, an existing object will be replaced.

Choices:

  • no ← (default)

  • yes

headless

string

Specify if the virtual machine should have attached a minimal Video and Graphics device configuration.

By default a minimal Video and Graphics device configuration will be applied to the VirtualMachineInstance. The video device is vga compatible and comes with a memory size of 16 MB.

host

string

Provide a URL for accessing the API. Can also be specified via K8S_AUTH_HOST environment variable.

hostname

string

Specifies the hostname of the virtual machine. The hostname will be set either by dhcp, cloud-init if configured or virtual machine name will be used.

hugepage_size

string

Specify huge page size.

interfaces

list / elements=string

An interface defines a virtual network interface of a virtual machine (also called a frontend).

All possible configuration options interfaces are available in https://kubevirt.io/api-reference/master/definitions.html#_v1_interface

Each interface must have specified a network that declares which logical or physical device it is connected to (also called as backend). All possible configuration options of network are available in https://kubevirt.io/api-reference/master/definitions.html#_v1_network.

kubeconfig

path

Path to an existing Kubernetes config file. If not provided, and no other connection options are provided, the openshift client will attempt to load the default configuration file from ~/.kube/config.json. Can also be specified via K8S_AUTH_KUBECONFIG environment variable.

labels

dictionary

Labels are key/value pairs that are attached to virtual machines. Labels are intended to be used to specify identifying attributes of virtual machines that are meaningful and relevant to users, but do not directly imply semantics to the core system. Labels can be used to organize and to select subsets of virtual machines. Labels can be attached to virtual machines at creation time and subsequently added and modified at any time.

More on labels that are used for internal implementation https://kubevirt.io/user-guide/#/misc/annotations_and_labels

machine_type

string

QEMU machine type is the actual chipset of the virtual machine.

memory

string

The amount of memory to be requested by virtual machine.

For example 1024Mi.

memory_limit

string

The maximum memory to be used by virtual machine.

For example 1024Mi.

merge_type

list / elements=string

Whether to override the default patch merge approach with a specific type.

If more than one merge type is given, the merge types will be tried in order.

Defaults to ['strategic-merge', 'merge'], which is ideal for using the same parameters on resource kinds that combine Custom Resources and built-in resources, as Custom Resource Definitions typically aren’t updatable by the usual strategic merge.

See https://kubernetes.io/docs/tasks/run-application/update-api-object-kubectl-patch/#use-a-json-merge-patch-to-update-a-deployment

Choices:

  • json

  • merge

  • strategic-merge

name

string / required

Name of the virtual machine.

namespace

string / required

Namespace where the virtual machine exists.

node_affinity

dictionary

Describes vm affinity scheduling rules e.g. co-locate this vm in the same node, zone, etc. as some other vms

hard

dictionary

If the affinity requirements specified by this field are not met at scheduling time, the vm will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during vm execution (e.g. due to an update), the system may or may not try to eventually evict the vm from its node.

soft

dictionary

The scheduler will prefer to schedule vms to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding weight to the sum if the node matches the corresponding match_expressions; the nodes with the highest sum are the most preferred.

password

string

Provide a password for authenticating with the API. Can also be specified via K8S_AUTH_PASSWORD environment variable.

Please read the description of the username option for a discussion of when this option is applicable.

persist_config

boolean

Whether or not to save the kube config refresh tokens. Can also be specified via K8S_AUTH_PERSIST_CONFIG environment variable.

When the k8s context is using a user credentials with refresh tokens (like oidc or gke/gcloud auth), the token is refreshed by the k8s python client library but not saved by default. So the old refresh token can expire and the next auth might fail. Setting this flag to true will tell the k8s python client to save the new refresh token to the kube config file.

Default to false.

Please note that the current version of the k8s python client library does not support setting this flag to True yet.

The fix for this k8s python library is here: https://github.com/kubernetes-client/python-base/pull/169

Choices:

  • no

  • yes

proxy

string

The URL of an HTTP proxy to use for the connection. Can also be specified via K8S_AUTH_PROXY environment variable.

Please note that this module does not pick up typical proxy settings from the environment (e.g. HTTP_PROXY).

resource_definition

aliases: definition, inline

dictionary

A partial YAML definition of the object being created/updated. Here you can define Kubernetes resource parameters not covered by this module’s parameters.

NOTE: resource_definition has lower priority than module parameters. If you try to define e.g. metadata.namespace here, that value will be ignored and namespace used instead.

smbios_uuid

string

In order to provide a consistent view on the virtualized hardware for the guest OS, the SMBIOS UUID can be set.

state

string

Set the virtual machine to either present, absent, running or stopped.

present - Create or update a virtual machine. (And run it if it’s ephemeral.)

absent - Remove a virtual machine.

running - Create or update a virtual machine and run it.

stopped - Stop a virtual machine. (This deletes ephemeral VMs.)

Choices:

  • present ← (default)

  • absent

  • running

  • stopped

subdomain

string

If specified, the fully qualified virtual machine hostname will be hostname.subdomain.namespace.svc.cluster_domain. If not specified, the virtual machine will not have a domain name at all. The DNS entry will resolve to the virtual machine, no matter if the virtual machine itself can pick up a hostname.

tablets

list / elements=string

Specify tablets to be used as input devices

template

string

Name of Template to be used in creation of a virtual machine.

template_parameters

dictionary

New values of parameters from Template.

username

string

Provide a username for authenticating with the API. Can also be specified via K8S_AUTH_USERNAME environment variable.

Please note that this only works with clusters configured to use HTTP Basic Auth. If your cluster has a different form of authentication (e.g. OAuth2 in OpenShift), this option will not work as expected and you should look into the k8s_auth module, as that might do what you need.

validate_certs

aliases: verify_ssl

boolean

Whether or not to verify the API server’s SSL certificates. Can also be specified via K8S_AUTH_VERIFY_SSL environment variable.

Choices:

  • no

  • yes

wait

boolean

True if the module should wait for the resource to get into desired state.

Choices:

  • no

  • yes ← (default)

wait_sleep

string

Number of seconds to sleep between checks.

Default: 5

wait_timeout

integer

The amount of time in seconds the module should wait for the resource to get into desired state.

Default: 120

Notes

Note

  • The OpenShift Python client wraps the K8s Python client, providing full access to all of the APIS and models available on both platforms. For API version details and additional information visit https://github.com/openshift/openshift-restclient-python

  • To avoid SSL certificate validation errors when validate_certs is True, the full certificate chain for the API server must be provided via ca_cert or in the kubeconfig file.

  • In order to use this module you have to install Openshift Python SDK. To ensure it’s installed with correct version you can create the following task: pip: name=openshift>=0.8.2

Examples

- name: Start virtual machine 'myvm'
  community.kubevirt.kubevirt_vm:
      state: running
      name: myvm
      namespace: vms

- name: Create virtual machine 'myvm' and start it
  community.kubevirt.kubevirt_vm:
      state: running
      name: myvm
      namespace: vms
      memory: 64Mi
      cpu_cores: 1
      bootloader: efi
      smbios_uuid: 5d307ca9-b3ef-428c-8861-06e72d69f223
      cpu_model: Conroe
      headless: true
      hugepage_size: 2Mi
      tablets:
        - bus: virtio
          name: tablet1
      cpu_limit: 3
      cpu_shares: 2
      disks:
        - name: containerdisk
          volume:
            containerDisk:
              image: kubevirt/cirros-container-disk-demo:latest
              path: /custom-disk/cirros.img
          disk:
            bus: virtio

- name: Create virtual machine 'myvm' with multus network interface
  community.kubevirt.kubevirt_vm:
      name: myvm
      namespace: vms
      memory: 512M
      interfaces:
        - name: default
          bridge: {}
          network:
            pod: {}
        - name: mynet
          bridge: {}
          network:
            multus:
              networkName: mynetconf

- name: Combine inline definition with Ansible parameters
  community.kubevirt.kubevirt_vm:
      # Kubernetes specification:
      definition:
        metadata:
          labels:
            app: galaxy
            service: web
            origin: vmware

      # Ansible parameters:
      state: running
      name: myvm
      namespace: vms
      memory: 64M
      disks:
        - name: containerdisk
          volume:
            containerDisk:
              image: kubevirt/cirros-container-disk-demo:latest
              path: /custom-disk/cirros.img
          disk:
            bus: virtio

- name: Start ephemeral virtual machine 'myvm' and wait to be running
  community.kubevirt.kubevirt_vm:
      ephemeral: true
      state: running
      wait: true
      wait_timeout: 180
      name: myvm
      namespace: vms
      memory: 64M
      labels:
        kubevirt.io/vm: myvm
      disks:
        - name: containerdisk
          volume:
            containerDisk:
              image: kubevirt/cirros-container-disk-demo:latest
              path: /custom-disk/cirros.img
          disk:
            bus: virtio

- name: Start fedora vm with cloud init
  community.kubevirt.kubevirt_vm:
      state: running
      wait: true
      name: myvm
      namespace: vms
      memory: 1024M
      cloud_init_nocloud:
        userData: |-
          #cloud-config
          password: fedora
          chpasswd: { expire: False }
      disks:
        - name: containerdisk
          volume:
            containerDisk:
              image: kubevirt/fedora-cloud-container-disk-demo:latest
              path: /disk/fedora.qcow2
          disk:
            bus: virtio
      node_affinity:
        soft:
          - weight: 1
            term:
              match_expressions:
                - key: security
                  operator: In
                  values:
                    - S2

- name: Create virtual machine with datavolume and specify node affinity
  community.kubevirt.kubevirt_vm:
    name: myvm
    namespace: default
    memory: 1024Mi
    datavolumes:
      - name: mydv
        source:
          http:
            url: https://url/disk.qcow2
        pvc:
          accessModes:
            - ReadWriteOnce
          storage: 5Gi
    node_affinity:
      hard:
        - term:
            match_expressions:
              - key: security
                operator: In
                values:
                  - S1

- name: Remove virtual machine 'myvm'
  community.kubevirt.kubevirt_vm:
      state: absent
      name: myvm
      namespace: vms

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

kubevirt_vm

complex

The virtual machine dictionary specification returned by the API.

This dictionary contains all values returned by the KubeVirt API all options are described here https://kubevirt.io/api-reference/master/definitions.html#_v1_virtualmachine

Returned: success

Authors

  • KubeVirt Team (@kubevirt)