community.network.ce_bgp_neighbor_af – Manages BGP neighbor Address-family configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_bgp_neighbor_af.

Synopsis

  • Manages BGP neighbor Address-family configurations on HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

add_path_mode

string

null, Null. receive, Support receiving Add-Path routes. send, Support sending Add-Path routes. both, Support receiving and sending Add-Path routes.

Choices:

  • null

  • receive

  • send

  • both

adv_add_path_num

string

The number of addPath advertise route. The value is an integer ranging from 2 to 64.

advertise_arp

string

If the value is true, advertised ARP routes are distinguished. If the value is false, advertised ARP routes are not distinguished.

Choices:

  • no_use ← (default)

  • true

  • false

advertise_community

string

If the value is true, the community attribute is advertised to peers. If the value is false, the community attribute is not advertised to peers.

Choices:

  • no_use ← (default)

  • true

  • false

advertise_ext_community

string

If the value is true, the extended community attribute is advertised to peers. If the value is false, the extended community attribute is not advertised to peers.

Choices:

  • no_use ← (default)

  • true

  • false

advertise_irb

string

If the value is true, advertised IRB routes are distinguished. If the value is false, advertised IRB routes are not distinguished.

Choices:

  • no_use ← (default)

  • true

  • false

advertise_remote_nexthop

string

If the value is true, the remote next-hop attribute is advertised to peers. If the value is false, the remote next-hop attribute is not advertised to any peers.

Choices:

  • no_use ← (default)

  • true

  • false

af_type

string / required

Address family type of a BGP instance.

Choices:

  • ipv4uni

  • ipv4multi

  • ipv4vpn

  • ipv6uni

  • ipv6vpn

  • evpn

allow_as_loop_enable

string

If the value is true, repetitive local AS numbers are allowed. If the value is false, repetitive local AS numbers are not allowed.

Choices:

  • no_use ← (default)

  • true

  • false

allow_as_loop_limit

string

Set the maximum number of repetitive local AS number. The value is an integer ranging from 1 to 10.

default_rt_adv_enable

string

If the value is true, the function to advertise default routes to peers is enabled. If the value is false, the function to advertise default routes to peers is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

default_rt_adv_policy

string

Specify the name of a used policy. The value is a string. The value is a string of 1 to 40 characters.

default_rt_match_mode

string

null, Null. matchall, Advertise the default route if all matching conditions are met. matchany, Advertise the default route if any matching condition is met.

Choices:

  • null

  • matchall

  • matchany

discard_ext_community

string

If the value is true, the extended community attribute in the peer route information is discarded. If the value is false, the extended community attribute in the peer route information is not discarded.

Choices:

  • no_use ← (default)

  • true

  • false

export_acl_name_or_num

string

Apply an IPv4 ACL-based filtering policy to the routes to be advertised to a specified peer. The value is a string of 1 to 32 characters.

export_as_path_filter

string

Apply an AS_Path-based filtering policy to the routes to be advertised to a specified peer. The value is an integer ranging from 1 to 256.

export_as_path_name_or_num

string

Application of a AS path list based filtering policy to the routing of a specified peer.

export_pref_filt_name

string

Specify the IPv4 filtering policy applied to the routes to be advertised to a specified peer. The value is a string of 1 to 169 characters.

export_rt_policy_name

string

Specify the filtering policy applied to the routes to be advertised to a peer. The value is a string of 1 to 40 characters.

import_acl_name_or_num

string

Apply an IPv4 ACL-based filtering policy to the routes received from a specified peer. The value is a string of 1 to 32 characters.

import_as_path_filter

string

Apply an AS_Path-based filtering policy to the routes received from a specified peer. The value is an integer ranging from 1 to 256.

import_as_path_name_or_num

string

A routing strategy based on the AS path list for routing received by a designated peer.

import_pref_filt_name

string

Specify the IPv4 filtering policy applied to the routes received from a specified peer. The value is a string of 1 to 169 characters.

import_rt_policy_name

string

Specify the filtering policy applied to the routes learned from a peer. The value is a string of 1 to 40 characters.

ipprefix_orf_enable

string

If the value is true, the address prefix-based Outbound Route Filter (ORF) capability is enabled for peers. If the value is false, the address prefix-based Outbound Route Filter (ORF) capability is disabled for peers.

Choices:

  • no_use ← (default)

  • true

  • false

is_nonstd_ipprefix_mod

string

If the value is true, Non-standard capability codes are used during capability negotiation. If the value is false, RFC-defined standard ORF capability codes are used during capability negotiation.

Choices:

  • no_use ← (default)

  • true

  • false

keep_all_routes

string

If the value is true, the system stores all route update messages received from all peers (groups) after BGP connection setup. If the value is false, the system stores only BGP update messages that are received from peers and pass the configured import policy.

Choices:

  • no_use ← (default)

  • true

  • false

nexthop_configure

string

null, The next hop is not changed. local, The next hop is changed to the local IP address. invariable, Prevent the device from changing the next hop of each imported IGP route when advertising it to its BGP peers.

Choices:

  • null

  • local

  • invariable

orf_mode

string

ORF mode. null, Default value. receive, ORF for incoming packets. send, ORF for outgoing packets. both, ORF for incoming and outgoing packets.

Choices:

  • null

  • receive

  • send

  • both

orftype

string

ORF Type. The value is an integer ranging from 0 to 65535.

origin_as_valid

string

If the value is true, Application results of route announcement. If the value is false, Routing application results are not notified.

Choices:

  • no_use ← (default)

  • true

  • false

preferred_value

string

Assign a preferred value for the routes learned from a specified peer. The value is an integer ranging from 0 to 65535.

public_as_only

string

If the value is true, sent BGP update messages carry only the public AS number but do not carry private AS numbers. If the value is false, sent BGP update messages can carry private AS numbers.

Choices:

  • no_use ← (default)

  • true

  • false

public_as_only_force

string

If the value is true, sent BGP update messages carry only the public AS number but do not carry private AS numbers. If the value is false, sent BGP update messages can carry private AS numbers.

Choices:

  • no_use ← (default)

  • true

  • false

public_as_only_limited

string

Limited use public as number.

Choices:

  • no_use ← (default)

  • true

  • false

public_as_only_replace

string

Private as replaced by public as number.

Choices:

  • no_use ← (default)

  • true

  • false

public_as_only_skip_peer_as

string

Public as only skip peer as.

Choices:

  • no_use ← (default)

  • true

  • false

redirect_ip

string

Redirect ip.

Choices:

  • no_use ← (default)

  • true

  • false

redirect_ip_validation

aliases: redirect_ip_vaildation

string

Redirect ip validation.

Choices:

  • no_use ← (default)

  • true

  • false

reflect_client

string

If the value is true, the local device functions as the route reflector and a peer functions as a client of the route reflector. If the value is false, the route reflector and client functions are not configured.

Choices:

  • no_use ← (default)

  • true

  • false

remote_address

string / required

IPv4 or IPv6 peer connection address.

route_limit

string

Configure the maximum number of routes that can be accepted from a peer. The value is an integer ranging from 1 to 4294967295.

route_limit_idle_timeout

string

Specify the value of the idle-timeout timer to automatically reestablish the connections after they are cut off when the number of routes exceeds the set threshold. The value is an integer ranging from 1 to 1200.

route_limit_percent

string

Specify the percentage of routes when a router starts to generate an alarm. The value is an integer ranging from 1 to 100.

route_limit_type

string

Noparameter, After the number of received routes exceeds the threshold and the timeout timer expires,no action. AlertOnly, An alarm is generated and no additional routes will be accepted if the maximum number of routes allowed have been received. IdleForever, The connection that is interrupted is not automatically re-established if the maximum number of routes allowed have been received. IdleTimeout, After the number of received routes exceeds the threshold and the timeout timer expires, the connection that is interrupted is automatically re-established.

Choices:

  • noparameter

  • alertOnly

  • idleForever

  • idleTimeout

rt_updt_interval

string

Specify the minimum interval at which Update packets are sent. The value is an integer, in seconds. The value is an integer ranging from 0 to 600.

soostring

string

Configure the Site-of-Origin (SoO) extended community attribute. The value is a string of 3 to 21 characters.

substitute_as_enable

string

If the value is true, the function to replace a specified peer’s AS number in the AS-Path attribute with the local AS number is enabled. If the value is false, the function to replace a specified peer’s AS number in the AS-Path attribute with the local AS number is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

update_pkt_standard_compatible

string

If the value is true, When the vpnv4 multicast neighbor receives and updates the message, the message has no label. If the value is false, When the vpnv4 multicast neighbor receives and updates the message, the message has label.

Choices:

  • no_use ← (default)

  • true

  • false

vpls_ad_disable

string

If the value is true, enable vpls-ad. If the value is false, disable vpls-ad.

Choices:

  • no_use ← (default)

  • true

  • false

vpls_enable

string

If the value is true, vpls enable. If the value is false, vpls disable.

Choices:

  • no_use ← (default)

  • true

  • false

vrf_name

string / required

Name of a BGP instance. The name is a case-sensitive string of characters. The BGP instance can be used only after the corresponding VPN instance is created.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: CloudEngine BGP neighbor address family test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Config BGP peer Address_Family"
    community.network.ce_bgp_neighbor_af:
      state: present
      vrf_name: js
      af_type: ipv4uni
      remote_address: 192.168.10.10
      nexthop_configure: local
      provider: "{{ cli }}"

  - name: "Undo BGP peer Address_Family"
    community.network.ce_bgp_neighbor_af:
      state: absent
      vrf_name: js
      af_type: ipv4uni
      remote_address: 192.168.10.10
      nexthop_configure: local
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of aaa params after module execution

Returned: always

Sample: {“bgp neighbor af”: {“af_type”: “ipv4uni”, “remote_address”: “192.168.10.10”, “vrf_name”: “js”}, “bgp neighbor af other”: {“af_type”: “ipv4uni”, “nexthop_configure”: “local”, “vrf_name”: “js”}}

existing

dictionary

k/v pairs of existing aaa server

Returned: always

Sample: {“bgp neighbor af”: {“af_type”: “ipv4uni”, “remote_address”: “192.168.10.10”, “vrf_name”: “js”}, “bgp neighbor af other”: {“af_type”: “ipv4uni”, “nexthop_configure”: “null”, “vrf_name”: “js”}}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {“af_type”: “ipv4uni”, “nexthop_configure”: “local”, “remote_address”: “192.168.10.10”, “state”: “present”, “vrf_name”: “js”}

updates

list / elements=string

command sent to the device

Returned: always

Sample: [“peer 192.168.10.10 next-hop-local”]

Authors

  • wangdezhuang (@QijunPan)